Find the right job for your preferred location and specialty
Jobs Available
1 - 10 of 141 Matches
A&P Mechanics perform complex aircraft inspections, repairs, and modifications with minimal supervision. They must ensure that all work accomplished meets quality standards and specifications while interpreting aircraft technical manuals and electrical drawings. Mechanics must be able to follow standard operating procedures and operating support equipment such as external power carts, hydraulic mules, lift platforms, and tow tugs).
Essential Duties and Responsibilities
Perform scheduled, unscheduled or special inspections and maintenance in accordance with Manufacturer’s Maintenance Manuals and Federal Aviation regulations
Troubleshoot aircraft systems and perform operational and functional checks; service oil, tires, fuel and hydraulic systems; provide nitrogen and oxygen servicing; inspect and repair pitot static systems and provide battery servicing
Troubleshoot and perform maintenance/repairs/component removal/installation on aircraft, engines and a variety of electrical, mechanical and hydraulic components and accessories such as propellers, starters, generators, fuel pumps, hydraulic pumps, actuators, wheels, tires and brakes.
Perform structural repairs to airframes, including sheet metal work, riveting, patching and fiberglass/composite work
Certify all work as required by FAA regulations, industry guidelines and company standards/procedures, including interfaces as necessary with various computer tracking systems and using appropriate company forms
Make required entries for work orders, discrepancies, and corrective actions, and complete all associated computer/paperwork requirements, including turnover logs
Assist and train other technicians when needed
Participate in ongoing training opportunities, as appropriate for position
Perform other duties as assigned
Requirements
2-5 years of aircraft maintenance experience
Current FAA Airframe and Powerplant license
High School Diploma or General Education Degree required.
Excellent interpersonal oral and written communication skills. Must be able to read, write and speak English.
Highly proficient with computer based technical data programs, and be competent in researching and use of appropriate technical manuals and industry reference materials
Must be mechanically adept and demonstrate the skills and knowledge consistent with industry standards for this position, including an understanding of various airframe and power plant systems.
Must be able to work inside and outside under varying work and climatic conditions, have the ability to lift up to 70 pounds and must be comfortable with heights.
Must have own tools
Experience desired on CRJ and ERJ aircraft, Sheet metal experience is a plus
Must have strong drive for top notch customer service and safety, and be a team player with a “Can Do” attitude.
This is a safety-sensitive position and falls under the provisions of the FAA's mandatory drug and alcohol testing requirements, including the release of prior drug and alcohol testing results from previous employers for the past two (2) years
Must pass a pre-employment drug screening and full background investigation which may include education, criminal and work history verifications. If hired, will be subject to mandatory random drug testing.
Miscellaneous
Must Bring Tools
About Our Client
Our client is a complete, one stop FAR part 145 repair station housed in a 32,000 square foot hangar facility located on Sioux City, Iowa's Sioux Gateway Airport (KSUX). They have all the necessary capabilities required to take care of any and all of their clients airline's needs. They provide a complete range of in-house maintenance and repair options from heavy checks, line maintenance, sheet metal repair and fabrication, all the way to complete exterior aircraft paint. They currently have numerous aircraft and engines on our certificate, including General Electric, Pratt an Whitney, and Rolls Royce. Aircraft include Saab, Beech, Embraer, De Haviland, and Bombardier CRJ 900 and Q 400 aircraft. In addition, we have staff mechanics, equipment, and personnel ready at a moments notice to dispatch 24/7 to any location necessary to get your AOG aircraft back in service.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
134464670260658
The Sheet Metal Mechanic is responsible for high proficiency in all minor through major repairs, modifications, E.A.s, and with minimal supervision.
Essential Duties and Responsibilities
Remove and replace various aircraft components with the use of special tooling and ground support equipment following oral and written instructions such as supervisor’s directives and manuals to complete all routine and non-routine assignments in a timely manner.
Proficient detail blueprint reading, ability to read, interpret and work from service bulletins, engineering work orders, major S.R.M. structural repairs.
Ability to layout work using bend radius, set back and bend allowance charts, utilization of shop math, install and/or splice spars, landing gear, trunion changes, pressure bulkhead repairs and keal beam repairs/ removal and reinstall.
Knowledge of ATA codes, knowledge of all applicable F.A.R.’s and company policies and procedures including job card/ time card, routine/ non-routine cards, S.R.M.’s, service bulletins, E.O.’s, and work sign-off/ sell-off procedures.
Perform the duties of and provide the necessary training for lower skill levels.
Maintain and store tools in a serviceable condition.
Adhere to safe maintenance practices and keep a clean work area.
Maintain and supply personal records of work performed on OJT forms for the Training Department.
Successfully complete any courses deemed necessary by the Training Department.
Perform any work that may be assigned by his or her supervisor.
Requirements
8+ years of aviation structures mechanic experience
Tools are required
Miscellaneous
About Our Client
Our client hosts maintenance facilities in Calgary, Canada, Great Falls, MT and Jacksonville, FL providing complete maintenance, interiors refurbishment and storage capabilities for regional airlines, manufacturers and aircraft leasing companies.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
175073016575661
The Sheetmetal Mechanic is responsible for high proficiency in all minor through major repairs, modifications, E.A.s, and with minimal supervision.
Essential Duties and Responsibilities
Remove and replace various aircraft components with the use of special tooling and ground support equipment following oral and written instructions such as supervisor’s directives and manuals to complete all routine and non-routine assignments in a timely manner.
Proficient detail blueprint reading, ability to read, interpret and work from service bulletins, engineering work orders, major S.R.M. structural repairs.
Ability to layout work using bend radius, set back and bend allowance charts, utilization of shop math, install and/or splice spars, landing gear, trunion changes, pressure bulkhead repairs and keal beam repairs/ removal and reinstall.
Knowledge of ATA codes, knowledge of all applicable F.A.R.’s and company policies and procedures including job card/ time card, routine/ non-routine cards, S.R.M.’s, service bulletins, E.O.’s, and work sign-off/ sell-off procedures.
Perform the duties of and provide the necessary training for lower skill levels.
Maintain and store tools in a serviceable condition.
Adhere to safe maintenance practices and keep a clean work area.
Maintain and supply personal records of work performed on OJT forms for the Training Department.
Successfully complete any courses deemed necessary by the Training Department.
Perform any work that may be assigned by his or her supervisor.
Requirements
3-9 years of sheet metal experience on commercial aircraft
Must have own tools
SIDA badge
Must be able to complete and pass 10 year background check
Miscellaneous
Must report with two forms of employment eligibility identification
About Our Client
Whether it’s aircraft and engine recovery, evaluation, storage, maintenance, or redeployment, our clients offer a broad range of premium services and solutions, individually tailored or fully integrated, to meet the specific needs of its premier customers.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
157657396532985
Our client is seeking detail-oriented and mechanically inclined individuals to join their production team as Wire Harness Builders in Cleveland, OH. This role supports a high-visibility aerospace project and involves hands-on assembly of wiring harnesses used in aircraft systems. While prior aviation experience is a plus, it is not required — this is an excellent opportunity for entry-level candidates looking to break into the aviation industry or expand their skillset in a fast-paced, team-driven environment.
Essential Duties and Responsibilities
Assemble wire harnesses and electrical components according to work instructions, diagrams, or schematics.
Cut, strip, crimp, route, and terminate wires using hand tools and automated equipment.
Install heat shrink, labels, and protective coverings per specifications.
Inspect work for accuracy and quality; perform basic continuity checks as needed.
Maintain clean, organized workstations and adhere to safety and quality standards.
Document work performed and communicate any issues to leads or supervisors.
Collaborate with teammates and follow standard operating procedures (SOPs) to meet production timelines.
Requirements
Basic mechanical aptitude or hands-on assembly experience required.
Ability to read and interpret basic instructions, schematics, or wiring diagrams preferred.
Strong attention to detail and ability to follow repetitive processes with consistency.
Aviation or wire harness experience is highly preferred, but not required.
Must be able to stand, bend, and work with small components for extended periods.
Must be eligible to work in the U.S. and pass background check and drug screen.
High School Diploma or equivalent required.
Miscellaneous
About Our Client
Our client is a world-class operator in the private aviation industry, known for delivering exceptional service and maintaining a cutting-edge fleet of business aircraft. With a strong commitment to safety, innovation, and employee development, they offer a dynamic and fast-paced work environment where skilled professionals can thrive. Their state-of-the-art maintenance facilities are staffed by some of the best technicians in the industry, and they take pride in upholding the highest standards of workmanship, compliance, and customer satisfaction. This is your opportunity to work with a respected leader in private aviation and take your career to new heights.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
698111874478180
A&P Mechanics perform complex aircraft inspections, repairs, and modifications with minimal supervision. They must ensure that all work accomplished meets quality standards and specifications while interpreting aircraft technical manuals and electrical drawings. Mechanics must be able to follow standard operating procedures and operating support equipment such as external power carts, hydraulic mules, lift platforms, and tow tugs).
Essential Duties and Responsibilities
Perform scheduled, unscheduled or special inspections and maintenance in accordance with Manufacturer’s Maintenance Manuals and Federal Aviation regulations
Troubleshoot aircraft systems and perform operational and functional checks; service oil, tires, fuel and hydraulic systems; provide nitrogen and oxygen servicing; inspect and repair pitot static systems and provide battery servicing
Troubleshoot and perform maintenance/repairs/component removal/installation on aircraft, engines and a variety of electrical, mechanical and hydraulic components and accessories such as propellers, starters, generators, fuel pumps, hydraulic pumps, actuators, wheels, tires and brakes.
Perform structural repairs to airframes, including sheet metal work, riveting, patching and fiberglass/composite work
Certify all work as required by FAA regulations, industry guidelines and company standards/procedures, including interfaces as necessary with various computer tracking systems and using appropriate company forms
Make required entries for work orders, discrepancies, and corrective actions, and complete all associated computer/paperwork requirements, including turnover logs
Assist and train other technicians when needed
Participate in ongoing training opportunities, as appropriate for position
Perform other duties as assigned
Requirements
0-2 years of relevant experience. *Will accept candidates straight out of school*
A&P License required
High School Diploma or General Education Degree required.
Excellent interpersonal oral and written communication skills. Must be able to read, write and speak English.
Highly proficient with computer based technical data programs, and be competent in researching and use of appropriate technical manuals and industry reference materials
Must be mechanically adept and demonstrate the skills and knowledge consistent with industry standards for this position, including an understanding of various airframe and power plant systems.
Must be able to work inside and outside under varying work and climatic conditions, have the ability to lift up to 70 pounds and must be comfortable with heights.
Must have own tools
Experience desired on CRJ and ERJ aircraft, Sheet metal experience is a plus
Must have strong drive for top notch customer service and safety, and be a team player with a “Can Do” attitude.
This is a safety-sensitive position and falls under the provisions of the FAA's mandatory drug and alcohol testing requirements, including the release of prior drug and alcohol testing results from previous employers for the past two (2) years
Must pass a pre-employment drug screening and full background investigation which may include education, criminal and work history verifications. If hired, will be subject to mandatory random drug testing.
Miscellaneous
Must Bring Tools
About Our Client
Our client is a complete, one stop FAR part 145 repair station housed in a 32,000 square foot hangar facility located on Sioux City, Iowa's Sioux Gateway Airport (KSUX). They have all the necessary capabilities required to take care of any and all of their clients airline's needs. They provide a complete range of in-house maintenance and repair options from heavy checks, line maintenance, sheet metal repair and fabrication, all the way to complete exterior aircraft paint. They currently have numerous aircraft and engines on our certificate, including General Electric, Pratt an Whitney, and Rolls Royce. Aircraft include Saab, Beech, Embraer, De Haviland, and Bombardier CRJ 900 and Q 400 aircraft. In addition, we have staff mechanics, equipment, and personnel ready at a moments notice to dispatch 24/7 to any location necessary to get your AOG aircraft back in service.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
782834372066747
The Sheetmetal Mechanic is responsible for high proficiency in all minor through major repairs, modifications, E.A.s, and with minimal supervision.
Essential Duties and Responsibilities
Remove and replace various aircraft components with the use of special tooling and ground support equipment following oral and written instructions such as supervisor’s directives and manuals to complete all routine and non-routine assignments in a timely manner.
Proficient detail blueprint reading, ability to read, interpret and work from service bulletins, engineering work orders, major S.R.M. structural repairs.
Ability to layout work using bend radius, set back and bend allowance charts, utilization of shop math, install and/or splice spars, landing gear, trunion changes, pressure bulkhead repairs and keal beam repairs/ removal and reinstall.
Knowledge of ATA codes, knowledge of all applicable F.A.R.’s and company policies and procedures including job card/ time card, routine/ non-routine cards, S.R.M.’s, service bulletins, E.O.’s, and work sign-off/ sell-off procedures.
Perform the duties of and provide the necessary training for lower skill levels.
Maintain and store tools in a serviceable condition.
Adhere to safe maintenance practices and keep a clean work area.
Maintain and supply personal records of work performed on OJT forms for the Training Department.
Successfully complete any courses deemed necessary by the Training Department.
Perform any work that may be assigned by his or her supervisor.
Requirements
10+ years of sheet metal experience on commercial aircraft
Must have own tools
SIDA badge
Must be able to complete and pass 10 year background check
Miscellaneous
Must report with two forms of employment eligibility identification
About Our Client
Whether it’s aircraft and engine recovery, evaluation, storage, maintenance, or redeployment, our clients offer a broad range of premium services and solutions, individually tailored or fully integrated, to meet the specific needs of its premier customers.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
643005103257877
The Quality Control (QC) Inspector is responsible for ensuring that aircraft painting and refinishing processes meet industry standards, customer specifications, and company quality requirements. This role involves inspecting aircraft surfaces, verifying proper paint application, and documenting findings to maintain compliance with FAA regulations and company procedures. The QC Inspector plays a crucial role in upholding safety, quality, and efficiency in aircraft refinishing operations.
Essential Duties and Responsibilities
Conduct thorough visual and dimensional inspections of aircraft surfaces before, during, and after painting to ensure compliance with specifications.
Verify proper surface preparation, masking, priming, and topcoat application per technical data and work instructions.
Perform thickness checks, adhesion tests, and gloss measurements using appropriate tools and equipment.
Identify and document defects or non-conformities, including runs, sags, orange peel, or contamination, and communicate corrective actions.
Ensure that all painting operations adhere to FAA regulations, customer requirements, and internal quality standards.
Work closely with painters, technicians, and supervisors to troubleshoot and resolve quality issues.
Maintain accurate inspection records, reports, and quality documentation in compliance with company policies.
Assist with internal and external audits by providing documentation and explanations regarding quality control processes.
Ensure compliance with safety protocols and hazardous material handling related to paints, coatings, and chemicals.
Train and mentor team members on quality procedures and best practices to promote continuous improvement.
Requirements
4-6 years of aircraft inspection experience
Understanding of paint application techniques, FAA regulations, and inspection procedures.
A&P License required
Attention to Detail: Strong ability to identify imperfections, defects, and inconsistencies in paint finishes.
Physical Requirements: Ability to stand, kneel, bend, and climb ladders/scaffolding for extended periods; must be able to lift up to 50 lbs.
Communication Skills: Strong verbal and written communication skills to effectively document and report findings.
Tools & Equipment: Familiarity with coating thickness gauges, gloss meters, adhesion testers, and other inspection tools.
Team Player: Ability to work collaboratively in a fast-paced, team-oriented environment.
Schedule Flexibility: Willingness to work varied shifts, weekends, and overtime as needed to meet production schedules.
Miscellaneous
About Our Client
Our client is an aircraft painting company committed to providing its customers unsurpassed quality and dependable return-to-service times at competitive prices. Our client has several domestic facilities and is equipped to process commercial, regional, military, or VIP Corporate aircraft.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
140856686496166
The A&P Mechanic maintains the Company’s aircraft in a safe and airworthy condition according to the Company maintenance manual and FAR regulations. Conducts or assists with all inspections and repairs on aircraft and aircraft sub-assemblies and performs required documentation, billing, regulatory and other administrative tasks in adherence with Company, customer and FAA policies.
Essential Duties and Responsibilities
Performs scheduled maintenance on aircraft, as assigned.
Ensures accuracy and timeliness of completed tasks.
Troubleshoots and repairs damaged, worn, or defective mechanical components.
Performs pre-flight and post-flight inspections on aircraft as time permits.
Reports discrepancies to Maintenance Manager or Pilot in Command.
Documents maintenance activities.
Completes required paperwork, including return to service requirements.
Observes current applicable FAA Regulations and GMM’s while performing required maintenance.
Complies with Company safety policies and procedures.
Maintains general cleanliness of hangar, parts/tool rooms and ramp areas, including operation of hangar floor cleaning machine.
Participates in preplanning briefing to ensure complete understanding of the project work scope, man-hour availability and projected completion date.
Ensures proper job planning so that parts and other resources are available in a timely manner to meet milestones and deadlines.
Demonstrates proper inspection and repair procedures.
Ensures that the work order is opened and updated throughout the project in a timely manner.
Ensures that squawks on work orders are accurate and descriptive.
Ensures that time and parts billed on a work order are accurate, justified and reasonable.
Trains, coaches and provides oversight to junior A&P’s.
Serves as a positive role model for ethical behavior and promotes an awareness and understanding of positive ethical and moral principles consistent with these principles; promotes and supports the mission, vision and values of the Company.
Performs other duties and assignments, as required.
Requirements
Minimum 5 years experience on corporate jets – Gulfstream, Learjet, Hawker, Challenger, Falcon experience is required
Experience performing scheduled inspections, line maintenance or sheet metal work on Gulfstream, Learjet, Hawker, Challenger, Falcon
A&P License Required
Local candidates preferred
Miscellaneous
Must bring tools
About Our Client
Our client is a full service corporate aircraft maintenance facility based in the DFW metroplex. Founded in 2008 by a team of highly experienced aviation professionals, they have grown into one of the most dependable aircraft maintenance operations in the industry.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
136472313167589
A&P Mechanics perform complex aircraft inspections, repairs, and modifications with minimal supervision. They must ensure that all work accomplished meets quality standards and specifications while interpreting aircraft technical manuals and electrical drawings. Mechanics must be able to follow standard operating procedures and operating support equipment such as external power carts, hydraulic mules, lift platforms, and tow tugs).
Essential Duties and Responsibilities
Perform scheduled, unscheduled or special inspections and maintenance in accordance with Manufacturer’s Maintenance Manuals and Federal Aviation regulations
Troubleshoot aircraft systems and perform operational and functional checks; service oil, tires, fuel and hydraulic systems; provide nitrogen and oxygen servicing; inspect and repair pitot static systems and provide battery servicing
Troubleshoot and perform maintenance/repairs/component removal/installation on aircraft, engines and a variety of electrical, mechanical and hydraulic components and accessories such as propellers, starters, generators, fuel pumps, hydraulic pumps, actuators, wheels, tires and brakes.
Perform structural repairs to airframes, including sheet metal work, riveting, patching and fiberglass/composite work
Certify all work as required by FAA regulations, industry guidelines and company standards/procedures, including interfaces as necessary with various computer tracking systems and using appropriate company forms
Make required entries for work orders, discrepancies, and corrective actions, and complete all associated computer/paperwork requirements, including turnover logs
Assist and train other technicians when needed
Participate in ongoing training opportunities, as appropriate for position
Perform other duties as assigned
Requirements
5+ years of aircraft maintenance experience
Current FAA Airframe and Powerplant license
High School Diploma or General Education Degree required.
Excellent interpersonal oral and written communication skills. Must be able to read, write and speak English.
Highly proficient with computer based technical data programs, and be competent in researching and use of appropriate technical manuals and industry reference materials
Must be mechanically adept and demonstrate the skills and knowledge consistent with industry standards for this position, including an understanding of various airframe and power plant systems.
Must be able to work inside and outside under varying work and climatic conditions, have the ability to lift up to 70 pounds and must be comfortable with heights.
Must have own tools
Experience desired on CRJ and ERJ aircraft, Sheet metal experience is a plus
Must have strong drive for top notch customer service and safety, and be a team player with a “Can Do” attitude.
This is a safety-sensitive position and falls under the provisions of the FAA's mandatory drug and alcohol testing requirements, including the release of prior drug and alcohol testing results from previous employers for the past two (2) years
Must pass a pre-employment drug screening and full background investigation which may include education, criminal and work history verifications. If hired, will be subject to mandatory random drug testing.
Miscellaneous
Must Bring Tools
About Our Client
Our client is a complete, one stop FAR part 145 repair station housed in a 32,000 square foot hangar facility located on Sioux City, Iowa's Sioux Gateway Airport (KSUX). They have all the necessary capabilities required to take care of any and all of their clients airline's needs. They provide a complete range of in-house maintenance and repair options from heavy checks, line maintenance, sheet metal repair and fabrication, all the way to complete exterior aircraft paint. They currently have numerous aircraft and engines on our certificate, including General Electric, Pratt an Whitney, and Rolls Royce. Aircraft include Saab, Beech, Embraer, De Haviland, and Bombardier CRJ 900 and Q 400 aircraft. In addition, we have staff mechanics, equipment, and personnel ready at a moments notice to dispatch 24/7 to any location necessary to get your AOG aircraft back in service.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
135961581064723
The Sheetmetal Mechanic will troubleshoot, inspect and perform maintenance on customer aircraft sheet metal components, composites and hydraulics. Perform and document all work performed per appropriate manuals and regulations as required.
Essential Duties and Responsibilities
Adhere to clients General Work Requirements
Comply with environmental health / safety policies / procedures, participate in 5-S activities and perform work in a safe and timely manner.
Remove / install aircraft components as required
Fabricate and or modify structural modifications on aircraft parts
Perform minor structural repairs on composite components either attached or detached
Assist in conducting hidden damage inspection of aircraft structures
Assist with complex structural repairs either on or off aircraft
Operate ground support equipment as required
Assist with aircraft component repair
Perform mechanical / electrical removals and installations as required
May assist with maintenance at off-site locations
Assist in wing removal as required
Assist maintenance as required
Inspect confined areas of airframe
Assist in designing, modifying and welding metal fixtures as required
Assist in providing time estimates as required
Fabricate sheet and/or composite components
Requirements
Minimum of 3 years' of structural sheet metal repair and modification experience, or sustained similar experience AND FAA A&P or A license OR Minimum of 8 years' of structural sheet metal repair and modification experience
Corporate jet aircraft or commercial aircraft experience preferred.
CRJ airframe experience a plus.
MRO experience a plus.
Military aircraft maintenance experience (Depot/Isochronal/Phase inspections) a plus.
FAA Airframe and Powerplant (A&P) or Airframe (A) License is required.
Must possess their own tools.
Ability to effectively communicate in English aircraft maintenance actions both verbally and in writing.
Must be comfortable with 12-hour shift work, which includes days / nights and weekends.
Miscellaneous
About Our Client
For over 130 years our client innovative and integrated solutions have demonstrated our commitment to creating a positive social impact around the globe. Our range of products and services are tailored to meet our customers’ evolving needs across the commercial aviation, energy, transportation and infrastructure, machinery, defense and space systems sectors.
Our culture embraces diversity and cooperation, and we promote a healthy balance of professional and personal development, ensuring that your ideas and expertise are valued and respected.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
191783367346034
