Jobs Available

81 - 90 of 194 Matches
Featured job

A&P Mechanic

Midwest (Indianapolis, IN)
Posted on 3/25/2025

Under minimal supervision, perform scheduled inspections, routine service to complex maintenance and repair activities on various airframe types.

Essential Duties and Responsibilities

Provide technical guidance, OJT and instruction regarding scheduled inspections, routine service to complex maintenance and repair activities on various airframe types. Complete all maintenance activities as stated on the work order, incoming inspection or in a manufacture required service bulletin, CAMP cards, etc. Perform advanced aircraft modifications, corrosion, landing gear or engine removals. Ensure all work is completed per the maintenance manual, service bulletin, client RSM, FAR or other such documentation. In partnership with Quality ensure full compliance to all internal and FAA inspection and documentation requirements. To include proper sign-off’s, completion of component removal sheets, etc. Demonstrate effective maintenance repair techniques using acceptable practices, tooling and providing mentoring to junior level technicians. Conducts functional and operational tests to evaluate performance and reliability. Ensures quality and efficiency of all assigned inspections, service and maintenance work scopes. Maintain a safe working environment. Other duties as assigned not specifically stated herein.

Requirements

6+ years of progressive maintenance experience and/or training in the business aviation industry or military. Valid FAA A&P license High school diploma or GED. Associates degree in Aviation Maintenance Demonstrated ability to read, interpret and understand blueprints and maintenance manuals. Ability to read, write and speak the English language. Must be an effective communicator both verbally and in writing. Demonstrate a strong mechanical aptitude.

Miscellaneous

The work environment described here is representative of those required by an employee to perform the essential functions of this job with or without reasonable accommodations. The location where this position works is in the back shop of an aircraft hangar environment which could be subject to weather changes and is subject to constant exposure to loud noise, potential contact with hazardous waste material, heavy machinery and other safety hazards such as cabinets, etc. PHYSICAL DEMANDS: The physical demands described here is representative of those required by an employee to perform the essential functions of this job with or without reasonable accommodations.

About Our Client

Our Client is continuously innovating in the large to very large business jet aircraft segment engineering luxury into our cabin completions, upgrades and refurbishments. Located in Indianapolis, Indiana our client has established itself as one of the most unique and modern completion & service centers in the world exclusively for Airbus Corporate Jets, Boeing Business Jets, Bombardier Business aircraft and Sukhoi Business Jets.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

113087287334414

Featured job

Structures Technician I

south central (Cedar Hill, TX)
Posted on 3/25/2025

Maintain, repair, modify, fabricate, and installation of parts, items, and assemblies of structural components using current technical data such as blue prints or manufacturers drawings/manuals. Plans, lays out, fabricates, assembles, installs, and repairs both internal and external aircraft structures and surfaces for aircraft repair. Performs repairs with varying sheet metal types, and thicknesses. Remove and replace of various fastener types such as solid rivets, blind rivet, HI-Loc, etc.

Essential Duties and Responsibilities

Read and write English Read and follow all work instructions, as well as properly document work performed using documents such as process planning, adhesive log sheets, Material Review Board/Engineering Work Orders (MRB/EWO’s), Process Specifications, Original Equipment Manufacturer (OEM) Manuals, etc. Read basic blueprints Use close tolerance measuring tools (i.e., scales, micrometers, calipers, depth gages, etc.). Use hand tools (i.e., drill motors, die grinders, rivet guns, fastener installation tools, etc.). Perform alignment/assembly using jig, templates and fixtures. Perform trimming burring, countersinking, riveting, drilling and reaming to blueprint specified tolerance.

Requirements

1-3 years of aircraft assembly experience High school diploma, GED equivalent Physical Requirements: Stand, kneel, bend for extended periods of time. Lift 50lbs

Miscellaneous

Must have own tools, must be able to complete/pass a plate test prior to starting

About Our Client

Our client is an industry leading repair and overhaul facility specializing in composites, flight structures, components and nacelles for today's sophisticated business and commercial aircraft. They recognize this is the result of their talented team of trusted employees working together to deliver customer service excellence.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

157966964532379

Featured job

Structural Mech Trainee

Southeast (Savannah, GA)
Posted on 3/25/2025

This is an entry-level position in which the individual will be trained in the processes related to the manufacturing and/or service of our aircraft. In a team environment, under direct supervision, perform a variety of structural assembly operations.

Essential Duties and Responsibilities

Under specific instruction and guidance, perform fitting of detail parts and basic drilling and riveting operations using basic mechanic hand tools (pneumatic drills, rivet gun, counter sinks, reamers and files, etc.) Ensure parts and work content meets the instructions of assigned manufacturing employee and/or Quality Control Inspector Learn to read work orders, blueprints, and specification sheets to determine sequence of operation and work requirement Align and assemblies parts to be riveted using holding fixtures, pins, clamps and fasteners Observe and assist to become familiar with parts and assemblies, then works with decreasing supervision as experience is gained.

Requirements

High School Diploma or GED required. Entry level position. Strong mechanical aptitude. Enrollment in a Technical Aviation program preferred. Essential communication skills include the ability to read, write, speak, and understand the English language, and listening and computer keyboard skills. Must be able to read a scale and perform basic shop math Read and comprehend basic documents and instructions. Must have essential personal skills, which include an aptitude for hands-on craftwork, a professional attitude, attention to detail, ability to work with people and to meet demanding schedules Must demonstrate good housekeeping and safety practices Proficiency in current personal computer based software Must be available to work any shift Must be able to lift and transport objects up to 40 pounds

Miscellaneous

About Our Client

Our client has led the evolution of business and personal aviation since the 1958 debut of the world’s first purpose-built business aircraft Today, they produce the world’s most advanced business aircraft, with innovations from nose to tail and wingtip to wingtip, all while offering unmatched global product support and service.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

110166366697735

Featured job

Structures Technician III

south central (Cedar Hill, TX)
Posted on 3/25/2025

Maintain, repair, modify, fabricate, and installation of parts, items, and assemblies of structural components using current technical data such as blue prints or manufacturers drawings/manuals. Plans, lays out, fabricates, assembles, installs, and repairs both internal and external aircraft structures and surfaces for aircraft repair. Performs repairs with varying sheet metal types, and thicknesses. Remove and replace of various fastener types such as solid rivets, blind rivet, HI-Loc, etc.

Essential Duties and Responsibilities

Read and write English Read and follow all work instructions, as well as properly document work performed using documents such as process planning, adhesive log sheets, Material Review Board/Engineering Work Orders (MRB/EWO’s), Process Specifications, Original Equipment Manufacturer (OEM) Manuals, etc. Read basic blueprints Use close tolerance measuring tools (i.e., scales, micrometers, calipers, depth gages, etc.). Use hand tools (i.e., drill motors, die grinders, rivet guns, fastener installation tools, etc.). Perform alignment/assembly using jig, templates and fixtures. Perform trimming burring, countersinking, riveting, drilling and reaming to blueprint specified tolerance.

Requirements

5+ years of aircraft assembly experience High school diploma, GED equivalent Physical Requirements: Stand, kneel, bend for extended periods of time. Lift 50lbs

Miscellaneous

Must have own tools, must be able to complete/pass a plate test prior to starting

About Our Client

Our client is an industry leading repair and overhaul facility specializing in composites, flight structures, components and nacelles for today's sophisticated business and commercial aircraft. They recognize this is the result of their talented team of trusted employees working together to deliver customer service excellence.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

170940216511398

Featured job

Sheetmetal Mechanic II

Southeast (Jacksonville, FL)
Posted on 3/25/2025

Perform a basic to advanced level skilled work to accomplish sheet metal repairs and replacements of structural parts. Fabricate replacement covering, panels, or fairings by using the removed parts as samples. Reads and complies with instructions and safety information as necessary for proper and safe completion of assigned work.

Essential Duties and Responsibilities

Cleans corrosion and treats metal surfaces per the manufacturer’s instructions and specifications. Performs basic sheet metal repairs and replacement of structural parts using the following skills: Use measuring instruments such as rulers and grip gauges Utilize hand and powered tools such as hammers, chisels, hand snips, band and circle saws, drill presses, squaring shears and brakes to cut and form Ability to assemble parts by, bolting, screwing, and riveting Determine different types of fasteners used by symbol Remove and install minor components of aircraft structure or systems such as fairings, cargo liners, cargo floors and access panels Ability to repair minor or secondary structure per the manufactures SRM Fabricates replacement covering, panels, or fairings by using the removed parts as samples. Performs repairs of a cosmetic nature in passenger cabin interiors. Performs and demonstrates understanding of sealing procedures of aircraft structures. Performs bonded repairs of honeycomb structures as instructed. Identifies the locations of pressurized areas of aircraft. Opens and closes areas on the aircraft that are required to be open for inspection. Applies corrosion preventatives and maintains knowledge of areas of the aircraft in which corrosion inhibiting liquids may not be applied. Possesses working knowledge of ATA Codes (Chapter and Subchapters) as well as aircraft zones, narrow body airframe familiarization, and industry standards. Reads maintenance manuals to identify and locate aircraft components on the aircraft, and accurately implements instructions of maintenance manuals. Identifies the structural composition of aircraft (i.e., aluminum or composite) prior to performing any work on the structure. Performs repairs on noted discrepancies, and effectively researches manufacturer’s manuals for appropriate repair procedures prior to performing repairs. Prepares and maintains simple records such as work order documentation, logs, and time and material records, as instructed. Follows safety procedures and wears/uses appropriate safety equipment for the work being performed. Reads instructions and safety information as necessary for proper and safe completion of assigned work. Performs other duties as assigned.

Requirements

Minimum 3 years of sheet metal experience on Airbus and Boeing Aircraft High School Diploma or GED required. Airframe & Powerplant License, preferred Have own tools Must be able to read, write, and speak effectively in English regarding safety sensitive work activities, per FAA requirements. Individual will perform daily transactions within the ERP system (AMROS KIOSK), vending (POU), as well as research customer’s maintenance manuals. Work safely and follow safety rules and regulations. Take action to prevent others from engaging in unsafe practices.

Miscellaneous

Must report with two forms of employment eligibility identification

About Our Client

Our client is an independent provider of aviation services to commercial and government customers in more than 100 countries. Our client's aftermarket expertise and award-winning solutions help customers increase efficiency and reduce costs while maintaining high levels of quality, service and safety.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

119790563943590

Featured job

Sheetmetal Mechanic III

Southeast (Jacksonville, FL)
Posted on 3/25/2025

Perform a basic to advanced level skilled work to accomplish sheet metal repairs and replacements of structural parts. Fabricate replacement covering, panels, or fairings by using the removed parts as samples. Reads and complies with instructions and safety information as necessary for proper and safe completion of assigned work.

Essential Duties and Responsibilities

Cleans corrosion and treats metal surfaces per the manufacturer’s instructions and specifications. Performs basic sheet metal repairs and replacement of structural parts using the following skills: Use measuring instruments such as rulers and grip gauges Utilize hand and powered tools such as hammers, chisels, hand snips, band and circle saws, drill presses, squaring shears and brakes to cut and form Ability to assemble parts by, bolting, screwing, and riveting Determine different types of fasteners used by symbol Remove and install minor components of aircraft structure or systems such as fairings, cargo liners, cargo floors and access panels Ability to repair minor or secondary structure per the manufactures SRM Fabricates replacement covering, panels, or fairings by using the removed parts as samples. Performs repairs of a cosmetic nature in passenger cabin interiors. Performs and demonstrates understanding of sealing procedures of aircraft structures. Performs bonded repairs of honeycomb structures as instructed. Identifies the locations of pressurized areas of aircraft. Opens and closes areas on the aircraft that are required to be open for inspection. Applies corrosion preventatives and maintains knowledge of areas of the aircraft in which corrosion inhibiting liquids may not be applied. Possesses working knowledge of ATA Codes (Chapter and Subchapters) as well as aircraft zones, narrow body airframe familiarization, and industry standards. Reads maintenance manuals to identify and locate aircraft components on the aircraft, and accurately implements instructions of maintenance manuals. Identifies the structural composition of aircraft (i.e., aluminum or composite) prior to performing any work on the structure. Performs repairs on noted discrepancies, and effectively researches manufacturer’s manuals for appropriate repair procedures prior to performing repairs. Prepares and maintains simple records such as work order documentation, logs, and time and material records, as instructed. Follows safety procedures and wears/uses appropriate safety equipment for the work being performed. Reads instructions and safety information as necessary for proper and safe completion of assigned work. Performs other duties as assigned.

Requirements

Minimum 7 years of sheet metal experience on Airbus and Boeing Aircraft High School Diploma or GED required. Airframe & Powerplant License, preferred Have own tools Must be able to read, write, and speak effectively in English regarding safety sensitive work activities, per FAA requirements. Individual will perform daily transactions within the ERP system (AMROS KIOSK), vending (POU), as well as research customer’s maintenance manuals. Work safely and follow safety rules and regulations. Take action to prevent others from engaging in unsafe practices.

Miscellaneous

Must report with two forms of employment eligibility identification

About Our Client

Our client is an independent provider of aviation services to commercial and government customers in more than 100 countries. Our client's aftermarket expertise and award-winning solutions help customers increase efficiency and reduce costs while maintaining high levels of quality, service and safety.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

175025394556918

Featured job

Avionics Technician 8

Midwest (Wichita, KS)
Posted on 3/25/2025

We are seeking an Avionics Technician in Wichita, KS to perform inspections, adjustments, repairs, and replacements on aircraft systems in accordance with FAA/JAA regulations and technical data. The role includes basic mechanical and electrical tasks, documenting work performed, and coordinating with technical representatives to resolve system issues

Essential Duties and Responsibilities

Adhere to General Work Requirements Perform inspection, make adjustment and repair, replace components, and correct any malfunction or deficiency with and without power applied to the aircraft Perform maintenance on customer aircraft in accordance with applicable technical data and FAA/JAA regulations Access and re-install aircraft components, which obstruct the performance of assigned tasks Perform basic mechanical and electrical removals and installations Document work performed per Inspections Procedures Manual (IPM) Work on aircraft as well as in shops Perform other tasks, for example, cleaning aircraft using approved materials, methods, and equipment, load and secure ballast and/or freight as required Coordinate with technical representatives, lab, and other personnel in resolving systems or component problems Fabricate parts/wire harness and install per engineering specifications Assist with repairs on components detached from the aircraft, for example, flaps, ailerons, elevators, rudders, doors, and leading edges Assist with complex repairs at on-site and off-site locations Assist with engine removal and installation Assist in development of installations for engineering Assist with fueling/defueling aircraft as required

Requirements

5-8 years aircraft electrical/mechanical experience OR 2 years electrical avionics technical school with certificate or equivalent military/vendor training (preferred) PLUS 3 years of aircraft electrical/avionics experience You have the ability to read and interpret engineering documents and repair manuals

Miscellaneous

About Our Client

Our client is a global leader in aviation, committed to creating cutting-edge aircraft that set the standard for performance, reliability, and innovation. With headquarters in Montreal, Canada, they operate globally, including in the U.S., where they maintain a significant presence. The Wichita, KS, facility is dedicated to producing and maintaining some of the most advanced aircraft in the world, delivering unparalleled quality and service to their clients.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

159241744955279

Featured job

Interior Installation Tech II

Southeast (Savannah, GA)
Posted on 3/25/2025

The Interior Installation Technician II works under general supervision to remove, install, and/or fabricate aircraft interiors, which may include items such as trim, carpet, sound proofing, light structure, cabinetry, panels and other accessories. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations.

Essential Duties and Responsibilities

Safely perform aircraft removal, installation, and/or fabrication of aircraft interiors (which may include galleys, closets, lavatories, side ledges, bulkheads, doors and panels). Coordinate with supervision and Inspection to ensure compliance with Repair Station procedures, internal and FAA paperwork, signoffs and quality specifications. Use the material tracking system to create parts demand, track squawks and to sign-off work. Follow standard operating procedures when using tools and equipment such as hand tools, band saws, shears, sanders and brakes. Properly care for and maintain shop equipment and tools. Prepare and install aircraft interior items in accordance with company operation procedures and quality standards. Remove and re-install nut plates, inserts and other fasteners used in aircraft interiors. Apply proper use of hardware and fittings on aircraft installations. Comply with safety, 5S, and housekeeping policies and use personal protective equipment as required. Address unsafe conditions before putting people or property at risk. Assist technicians, under supervision, with aircraft maintenance requirements. Adapt to sudden schedule changes. Additional Functions: Work with lead and higher skilled technicians to develop and implement process improvements that reduce cost, cycle time, and man-hours using Lean Six Sigma and other process improvement techniques. Make and use simple patterns for own use employing standardized procedures. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.

Requirements

Education and Experience Requirements High School Diploma or GED required. 2 years of application installation, fabrication or related experience. preferred. Experience in aerospace industry. Other Requirements: Ability to read, write, speak, and understand the English language. Ability to read and interpret blueprints and engineering documentation. Ability to use hand/power tools and equipment associated with installation and removal of interiors. Able to climb ladders and stairs, work in small, restricted areas, lift up to 40 pounds and work any shift. Must be computer literate. Excellent communication skills, both verbal and written.

Miscellaneous

About Our Client

Our client has led the evolution of business and personal aviation since the 1958 debut of the world’s first purpose-built business aircraft. Today, they produce the world’s most advanced business aircraft, with innovations from nose to tail and wingtip to wingtip, all while offering unmatched global product support and service.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

175365150376372

Featured job

Avionics Technician 6

Midwest (Wichita, KS)
Posted on 3/25/2025

We are seeking an Avionics Technician in Wichita, KS to perform inspections, adjustments, repairs, and replacements on aircraft systems in accordance with FAA/JAA regulations and technical data. The role includes basic mechanical and electrical tasks, documenting work performed, and coordinating with technical representatives to resolve system issues

Essential Duties and Responsibilities

Adhere to General Work Requirements Perform inspection, make adjustment and repair, replace components, and correct any malfunction or deficiency with and without power applied to the aircraft Perform maintenance on customer aircraft in accordance with applicable technical data and FAA/JAA regulations Access and re-install aircraft components, which obstruct the performance of assigned tasks Perform basic mechanical and electrical removals and installations Document work performed per Inspections Procedures Manual (IPM) Work on aircraft as well as in shops Perform other tasks, for example, cleaning aircraft using approved materials, methods, and equipment, load and secure ballast and/or freight as required Coordinate with technical representatives, lab, and other personnel in resolving systems or component problems Fabricate parts/wire harness and install per engineering specifications Assist with repairs on components detached from the aircraft, for example, flaps, ailerons, elevators, rudders, doors, and leading edges Assist with complex repairs at on-site and off-site locations Assist with engine removal and installation Assist in development of installations for engineering Assist with fueling/defueling aircraft as required

Requirements

At least 1 year aircraft electrical/mechanical experience OR 2 years electrical avionics technical school with certificate or equivalent military/vendor training (preferred). You have the ability to read and interpret engineering documents and repair manuals

Miscellaneous

About Our Client

Our client is a global leader in aviation, committed to creating cutting-edge aircraft that set the standard for performance, reliability, and innovation. With headquarters in Montreal, Canada, they operate globally, including in the U.S., where they maintain a significant presence. The Wichita, KS, facility is dedicated to producing and maintaining some of the most advanced aircraft in the world, delivering unparalleled quality and service to their clients.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

134614123166610

Featured job

Aircraft Painter 7

Midwest (Wichita, KS)
Posted on 3/24/2025

As an Aircraft Painter, you will contribute to the preparation, application, and finishing of aircraft surfaces to meet customer specifications and quality standards. Your role involves ensuring all work complies with safety protocols, regulations, and customer expectations while delivering polished, professional results.

Essential Duties and Responsibilities

Adhere to Company General Work Requirements (Factory, Shop and/or Hangar positions). Comply with environmental health, safety policies and procedures; participate in 5-S activities and perform all work in a safe and timely manner. Perform surface preparation on aircraft and component parts. Apply primer, topcoat and final spray Polish painted surfaces for finished appearance. Inspect, perform touch-up and polish painted surfaces for a finished appearance. Install sealant and erosion tape. Performs and documents all work performed per appropriate manuals and regulations as required. Layout aircraft to customer specifications

Requirements

Minimum of 4 year of aircraft painting experience Satisfactory results on Pulmonary Function evaluation in order to obtain respirator certification. Formal vocational training or equivalent. Customer service and aviation work experience. Basic PC skills. Basic knowledge pulling maintenance manuals and IPCs from computer. Basic knowledge of regulations dealing with transportation of hazardous materials. Ability to communicate in both written and verbal form on individual and/or aircraft status. Ability to interpret and work with mechanical engineering drawings.

Miscellaneous

Ability to work in a fast-paced and dynamic environment Opportunity for growth and skill development in a leading aerospace company

About Our Client

Our client is a global leader in aviation, committed to creating cutting-edge aircraft that set the standard for performance, reliability, and innovation. With headquarters in Montreal, Canada, they operate globally, including in the U.S., where they maintain a significant presence. The Wichita, KS, facility is dedicated to producing and maintaining some of the most advanced aircraft in the world, delivering unparalleled quality and service to their clients.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

611812389644242

Benefits of working with APA Services

Weekly Payroll, Medical Insurance Available, Cash Advances, Travel Pay and/or bonuses on Select Contracts.
We know it takes great people to do great work, so if you're interested in joining the APA Services family, give us a call at:

(817)529-4000

Thanks for taking the time to visit APA Services and we look forward to working with you soon.

Browse All Jobs