Jobs Available

61 - 70 of 181 Matches
Featured job

Structural Fabricator 9

Northeast (Windsor Locks, CT)
Posted on 5/18/2026

We are seeking a skilled Structural Fabricator to support aircraft structural and component fabrication in a backshop environment. This role focuses on precision fabrication, modification, and repair of aircraft structures and components, supporting maintenance and production teams through high-quality workmanship, compliance, and collaboration. The ideal candidate brings hands-on fabrication expertise, corporate aviation exposure, and a strong commitment to safety and quality.

Essential Duties and Responsibilities

Adhere to general work requirements applicable to factory, shop, and hangar environments Comply with all environmental, health, and safety policies and procedures Participate in 5S initiatives and maintain a safe, organized work area Troubleshoot, inspect, repair, and maintain aircraft structural components Fabricate and modify aircraft structural parts and assemblies Perform structural repairs on composite components, both attached and detached Remove and install aircraft components as required Conduct or assist with inspections for hidden damage on aircraft structures Support and perform complex structural repairs on or off the aircraft Document all work in accordance with approved manuals and regulatory requirements Operate ground support equipment as required Repair or assist in the repair of aircraft and shop components Perform mechanical and limited electrical component removals and installations Inspect confined areas of the airframe Assist with wing removal and reinstallation activities as needed Support off-site maintenance activities when required Design, modify, and weld metal fixtures as needed Fabricate parts for ground support equipment Assist with aircraft towing operations Collaborate effectively with other maintenance and fabrication disciplines Perform other duties as assigned to support operational needs

Requirements

Minimum 8 years of structural fabrication experience (or substantiated equivalent experience) Minimum 1 year of corporate aircraft experience Completion of a Sheet Metal Aircraft Technician School or equivalent technical training Ability to read, interpret, and work from mechanical and engineering drawings Strong written and verbal communication skills related to task execution and aircraft status Ownership of a basic set of hand tools, with the ability to demonstrate proper inventory control Ability to obtain required Ground Support Equipment (GSE) qualifications Willingness to work unscheduled overtime, including weekends and holidays Ability to work outdoors in seasonal and inclement weather when required Ability to obtain a SIDA badge, if applicable Basic proficiency with computers and standard PC applications

Miscellaneous

About Our Client

Our client is a global leader in aviation, committed to creating cutting-edge aircraft that set the standard for performance, reliability, and innovation. With headquarters in Montreal, Canada, they operate globally, including in the U.S., where they maintain a significant presence. At the Hartford Service Center, the mission is to deliver top-tier maintenance and support for their fleet, ensuring each aircraft operates at peak performance. With a commitment to excellence and a focus on innovation, our client provides unmatched career opportunities for those passionate about aviation.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

107872606354593

Featured job

Avionics Technician 9

Northeast (Windsor Locks, CT)
Posted on 5/18/2026

We are seeking an Avionics Technician in Hartford, CT to perform inspections, adjustments, repairs, and replacements on aircraft systems in accordance with FAA/JAA regulations and technical data. The role includes basic mechanical and electrical tasks, documenting work performed, and coordinating with technical representatives to resolve system issues

Essential Duties and Responsibilities

Adhere to our clients General Work Requirements (Factory, Shop and / or Hangar positions) Comply with environmental health / safety policies and procedures. Participate in 5-S activities. Perform all assigned tasks in a safe and timely manner Troubleshoot, repair, inspect, modify and service aircraft avionics, electrical and electronic equipment Perform and document work performed per appropriate manuals and regulations as required Operate ground support equipment as required Assist with mechanical / electrical removals and installations Perform other duties as assigned May assist with maintenance at off-site locations Assist other maintenance discipline

Requirements

Avionics / electric A/C Technical School or other substantiated equivalent You have 8+ years of aircraft experience, which must include a minimum of 3 year experience on corporate jet aircraft Ability to read and understand electrical engineering drawings Ability to effectively communicate in both written and verbal form on individual and / or aircraft status Own Basic set of hand tools with the ability to demonstrate inventory & control of tools Must obtain appropriate Ground Support Equipment Qualifications as required Must be able to work unscheduled overtime including nonscheduled work days and holidays Must be able to work in seasonal/inclement weather outside Ability to obtain a Security Identification Display Area badge (SIDA) (if applicable) A Certification if required by customer (Commercial Aircraft) GROL (General Radiotelephone Operator License) or AET (Aircraft Electronics Technician) Certificate Experience on corporate jet aircraft / commercial aircraft Basic PC skills

Miscellaneous

About Our Client

Our client is a global leader in aviation, committed to creating cutting-edge aircraft that set the standard for performance, reliability, and innovation. With headquarters in Montreal, Canada, they operate globally, including in the U.S., where they maintain a significant presence. At the Hartford Service Center, the mission is to deliver top-tier maintenance and support for their fleet, ensuring each aircraft operates at peak performance. With a commitment to excellence and a focus on innovation, our client provides unmatched career opportunities for those passionate about aviation.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

181325610581257

Temp Acrylic Fabricator Assistant

South Central (Tulsa, OK)
Posted on 5/18/2026

Applies basic, and some intermediate technical skills and knowledge to perform various production operations to fabricate, assemble and repair metallic and nonmetallic parts and assemblies for aerospace industry applications.

Essential Duties and Responsibilities

Performs routine developmental learning assignments and applies standard solutions to work situations of a routine or repetitive nature. May perform a variety of routine duties related to the area to which assigned. Uses hand and power tools such as routers, drill motors, die grinders and other like tools to complete the required operations called out in the work instructions. Trims parts to fit and files, grinds, deburrs, bevels edges, polishes surfaces and other wise finishes out the material, part or assembly to specifications. Assembles detail parts into subassemblies and complete assemblies using written and verbal work instructions. Installs rivets, bolts, screws and clips and prepares and applies adhesives. Inspects assemblies and installation for conformance to specifications. Operates production machines and equipment such as hot or cold presses, band saws, and other like production machines to fabricate parts, components and material for production uses. Reviews production and process documentation and production scheduling and planning and assist in expediting the flow of material, parts and assemblies.

Requirements

High School Diploma or GED Must be able to use small hand tools and machinery Previous manufacturing experience preferred.

Miscellaneous

About Our Client

This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

942559463669846

Temp Acrylic Fabricator Assistant

South Central (Tulsa, OK)
Posted on 5/18/2026

Applies basic, and some intermediate technical skills and knowledge to perform various production operations to fabricate, assemble and repair metallic and nonmetallic parts and assemblies for aerospace industry applications.

Essential Duties and Responsibilities

Performs routine developmental learning assignments and applies standard solutions to work situations of a routine or repetitive nature. May perform a variety of routine duties related to the area to which assigned. Uses hand and power tools such as routers, drill motors, die grinders and other like tools to complete the required operations called out in the work instructions. Trims parts to fit and files, grinds, deburrs, bevels edges, polishes surfaces and other wise finishes out the material, part or assembly to specifications. Assembles detail parts into subassemblies and complete assemblies using written and verbal work instructions. Installs rivets, bolts, screws and clips and prepares and applies adhesives. Inspects assemblies and installation for conformance to specifications. Operates production machines and equipment such as hot or cold presses, band saws, and other like production machines to fabricate parts, components and material for production uses. Reviews production and process documentation and production scheduling and planning and assist in expediting the flow of material, parts and assemblies.

Requirements

High School Diploma or GED Must be able to use small hand tools and machinery Previous manufacturing experience preferred.

Miscellaneous

About Our Client

This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

128611071291393

Featured job

Sheetmetal Mechanic

West (Tucson, AZ)
Posted on 5/18/2026

The Sheetmetal Mechanic will troubleshoot, inspect and perform maintenance on customer aircraft sheet metal components, composites and hydraulics. Perform and document all work performed per appropriate manuals and regulations as required.

Essential Duties and Responsibilities

Adhere to clients General Work Requirements Comply with environmental health / safety policies / procedures, participate in 5-S activities and perform work in a safe and timely manner. Remove / install aircraft components as required Fabricate and or modify structural modifications on aircraft parts Perform minor structural repairs on composite components either attached or detached Assist in conducting hidden damage inspection of aircraft structures Assist with complex structural repairs either on or off aircraft Operate ground support equipment as required Assist with aircraft component repair Perform mechanical / electrical removals and installations as required May assist with maintenance at off-site locations Assist in wing removal as required Assist maintenance as required Inspect confined areas of airframe Assist in designing, modifying and welding metal fixtures as required Assist in providing time estimates as required Fabricate sheet and/or composite components

Requirements

Minimum of 3 years' of structural sheet metal repair and modification experience, or sustained similar experience Corporate jet aircraft or commercial aircraft experience preferred. CRJ airframe experience a plus. MRO experience a plus. Military aircraft maintenance experience (Depot/Isochronal/Phase inspections) a plus. FAA Airframe and Powerplant (A&P) or Airframe (A) License is required. Must possess their own tools. Ability to effectively communicate in English aircraft maintenance actions both verbally and in writing. Must be comfortable with 12-hour shift work, which includes days / nights and weekends.

Miscellaneous

About Our Client

For over 130 years our client innovative and integrated solutions have demonstrated our commitment to creating a positive social impact around the globe. Our range of products and services are tailored to meet our customers’ evolving needs across the commercial aviation, energy, transportation and infrastructure, machinery, defense and space systems sectors. Our culture embraces diversity and cooperation, and we promote a healthy balance of professional and personal development, ensuring that your ideas and expertise are valued and respected.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

191783367346034

Featured job

Structural Fabricator 7

Northeast (Windsor Locks, CT)
Posted on 5/18/2026

We are seeking a skilled Structural Fabricator to support aircraft structural and component fabrication in a backshop environment. This role focuses on precision fabrication, modification, and repair of aircraft structures and components, supporting maintenance and production teams through high-quality workmanship, compliance, and collaboration. The ideal candidate brings hands-on fabrication expertise, corporate aviation exposure, and a strong commitment to safety and quality.

Essential Duties and Responsibilities

Adhere to general work requirements applicable to factory, shop, and hangar environments Comply with all environmental, health, and safety policies and procedures Participate in 5S initiatives and maintain a safe, organized work area Troubleshoot, inspect, repair, and maintain aircraft structural components Fabricate and modify aircraft structural parts and assemblies Perform structural repairs on composite components, both attached and detached Remove and install aircraft components as required Conduct or assist with inspections for hidden damage on aircraft structures Support and perform complex structural repairs on or off the aircraft Document all work in accordance with approved manuals and regulatory requirements Operate ground support equipment as required Repair or assist in the repair of aircraft and shop components Perform mechanical and limited electrical component removals and installations Inspect confined areas of the airframe Assist with wing removal and reinstallation activities as needed Support off-site maintenance activities when required Design, modify, and weld metal fixtures as needed Fabricate parts for ground support equipment Assist with aircraft towing operations Collaborate effectively with other maintenance and fabrication disciplines Perform other duties as assigned to support operational needs

Requirements

Minimum 4 years of structural fabrication experience (or substantiated equivalent experience) Minimum 1 year of corporate aircraft experience Completion of a Sheet Metal Aircraft Technician School or equivalent technical training Ability to read, interpret, and work from mechanical and engineering drawings Strong written and verbal communication skills related to task execution and aircraft status Ownership of a basic set of hand tools, with the ability to demonstrate proper inventory control Ability to obtain required Ground Support Equipment (GSE) qualifications Willingness to work unscheduled overtime, including weekends and holidays Ability to work outdoors in seasonal and inclement weather when required Ability to obtain a SIDA badge, if applicable Basic proficiency with computers and standard PC applications

Miscellaneous

About Our Client

Our client is a global leader in aviation, committed to creating cutting-edge aircraft that set the standard for performance, reliability, and innovation. With headquarters in Montreal, Canada, they operate globally, including in the U.S., where they maintain a significant presence. At the Hartford Service Center, the mission is to deliver top-tier maintenance and support for their fleet, ensuring each aircraft operates at peak performance. With a commitment to excellence and a focus on innovation, our client provides unmatched career opportunities for those passionate about aviation.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

137740750174654

Temp Electrical & Wire Harness Assembler A

South Central (Tulsa, OK)
Posted on 5/18/2026

We are seeking a skilled Electronics Technician to support the build and integration of electrical systems for unmanned aerial vehicles (UAVs). This role focuses on wire harness fabrication, assembly, and testing, ensuring high-reliability performance in demanding aerospace environments. The ideal candidate is hands-on, detail-oriented, and experienced in building harnesses to print while working closely with engineering and production teams.

Essential Duties and Responsibilities

Key Responsibilities • Build and assemble wire harnesses and cable assemblies to engineering drawings, schematics, and work instructions • Perform cutting, stripping, crimping, soldering, and terminating of wires and connectors • Install and route harnesses within UAV structures, ensuring proper strain relief and protection • Interpret wiring diagrams, pinouts, and BOMs • Conduct continuity checks, insulation resistance testing, and functional testing • Troubleshoot and repair electrical issues in assemblies and systems • Support prototype builds and low-rate production (LRIP) efforts • Maintain documentation, redlines, and as-built configurations • Ensure compliance with quality standards and workmanship requirements (e.g., IPC/WHMA-A-620 preferred) • Work collaboratively with engineering to improve designs for manufacturability and reliability

Requirements

Required Qualifications • 6 months plus of experience in wire harness assembly or electronics technician role • Experience or Certification. (Does not have to be in aircraft) Proficiency in crimping, soldering, and cable routing techniques • Ability to read and interpret electrical schematics and assembly drawings • Experience with mil/aerospace-style connectors (D38999, Micro-D, etc.) preferred • Familiarity with test equipment (multimeter, continuity tester, etc.) • Strong attention to detail and commitment to quality Preferred Qualifications • Experience in aerospace, defense, or UAV systems • IPC/WHMA-A-620 certification. • Experience with environmental considerations (vibration, thermal, EMI shielding) • Ability to support rapid prototyping and iterative development environments

Miscellaneous

About Our Client

This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

100996988780796

Temp Acrylic Fabricator Assistant

South Central (Tulsa, OK)
Posted on 5/18/2026

Applies basic, and some intermediate technical skills and knowledge to perform various production operations to fabricate, assemble and repair metallic and nonmetallic parts and assemblies for aerospace industry applications.

Essential Duties and Responsibilities

Performs routine developmental learning assignments and applies standard solutions to work situations of a routine or repetitive nature. May perform a variety of routine duties related to the area to which assigned. Uses hand and power tools such as routers, drill motors, die grinders and other like tools to complete the required operations called out in the work instructions. Trims parts to fit and files, grinds, deburrs, bevels edges, polishes surfaces and other wise finishes out the material, part or assembly to specifications. Assembles detail parts into subassemblies and complete assemblies using written and verbal work instructions. Installs rivets, bolts, screws and clips and prepares and applies adhesives. Inspects assemblies and installation for conformance to specifications. Operates production machines and equipment such as hot or cold presses, band saws, and other like production machines to fabricate parts, components and material for production uses. Reviews production and process documentation and production scheduling and planning and assist in expediting the flow of material, parts and assemblies.

Requirements

High School Diploma or GED Must be able to use small hand tools and machinery Previous manufacturing experience preferred.

Miscellaneous

About Our Client

This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

207774000071487

Featured job

Cabinet Maker

Southeast (SMYRNA, TN)
Posted on 5/18/2026

Cabinet Builder needed for Aircraft shop in Greenville, SC

Essential Duties and Responsibilities

Must have cabinet building experience in corporate high end aircraft. Must have the skills to read blue prints and work with little or no supervision to construct the cabinetry. Must be able to help install, if necessary. Familiar with Lean Manufacturing principles Performs other duties as assigned Able to work from documentation such as company procedures, preparation packages, etc. Must be flexible to work 1st or 2nd shifts.

Requirements

Minimum 3 years experience on Corporate aircraft Experience working with aircraft cabinetry materials including: honeycomb & veneers Must report for assignment with personal set of standard trade specific tools Able to work in a confined space. Able to lift and transport up to 50 lbs. with or without reasonable accommodation Must have visual capacity and muscular dexterity to work on fine detail, high cost products with a minimum of errors and rework.

Miscellaneous

Preferred Qualifications: Experience in a structured, high-compliance Part 145 or corporate aviation environment PT6 turbine engine experience Light avionics troubleshooting experience Strong attention to detail and a high sense of ownership

About Our Client

Since 1950, our partner has set the standard for excellence in business aircraft sales, service and management. Its rich history began in Greenville, SC and has expanded to additional locations in Nashville, TN & Dayton, OH.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

207596912418729

Featured job

QC Inspector A

South Central (Little Rock, AR)
Posted on 5/18/2026

Perform in-process and final inspections of aircraft systems and components to determine the conformity of the aircraft to approved data and airworthiness. Perform installation inspections of components, structures wiring and other aircraft associated items for conformity to engineering and other approved data.

Essential Duties and Responsibilities

“CRITICAL” Perform complete major inspection of aircraft, components, major assemblies, sub- assemblies, production tools or parts during manufacturing, modifications, installation, service, overhaul or flight to determine airworthiness, safety or conformance to approved data and Company standards and requirements. “CRITICAL” Apply technical knowledge in the fields of mechanics, hydraulics, electricity, sheet metal, rigging, instruments, test flights, etc. to determine and sign off safety, airworthiness, or conformance. “CRITICAL” Perform conformity inspection of components, major assemblies, sub-assemblies, or parts during manufacturing, modifications, installations to determine safety or conformance to standards and requirements. “CRITICAL” Interpret and check prints, both hard copy and electronic, engineering change orders and governmental regulatory procedures and specifications. “CRITICAL” Determine extent of work to be performed where no specifications, regulations or written standards are available. “CRITICAL” Use precision measuring guides, gauges and laboratory instruments. Is familiar with FAR Part 145, 135, 91, 65 and 21 and related A/C’s Is familiar with FWW processes. Prepare necessary aircraft related FAA, customer or company documents. Complete and maintain reports and records as required. Accurately enter electronic data related to aircraft production, completion and installation operations. Suggest dispositions of damaged or worn parts and the possibility of salvage based on FAA/EASA regulations, company practices or procedures. Work in a safe manner in accordance with OSHA and company safety procedures. Perform all other duties as assigned as assigned

Requirements

High school diploma or equivalent. A&P License Minimum of 5 years experience in maintenance of aircraft Experience with FAR 145 Repair Station and FAR 43 Maintenance. Able to read and understand structural and avionic drawings, schematics, test procedures, etc. Good verbal and written communication skills to prepare detailed reports. Computer literacy Critical thinking, logic and analytical skills. Pro-active and team orientated. Able to walk up and down steps with or without reasonable accommodation Able to walk long distances, climb, stand, and kneel for extended periods of time with or without reasonable accommodation Pass vision testing, minimum 20/20 corrected, and with no limitations in color perception. Write and speak clearly and intelligently in English Able to access confined areas. Working knowledge of Federal Aviation Regulations’, Type Certificate Data Sheet, Airworthiness Directives’, Advisory Circulars, etc. Able to work in a high noise environment (jet engines, air tools, etc.) with or without reasonable accommodation

Miscellaneous

Associate degree in aerospace field FCC license ISO 9000 familiarization and/or training. Powerplant License. WORKING CONDITIONS: Some travel may be required. Work various shifts. Outside work and work in non-climate controlled areas are required. Involves exposure to chemicals and dust levels set by OSHA standards.

About Our Client

Our partner is a French aerospace company with proven dual expertise as a manufacturer of both military aircraft and business jets. They are a pioneer in the use of CATIA™, the 3D CAD / CAM system that has become a global standard. They are a creator of more than 100 prototypes in the last century, with over 10,000 aircraft delivered to 90 countries.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

881998089003336

Benefits of working with APA Services

Weekly Payroll, Medical Insurance Available, Cash Advances, Travel Pay and/or bonuses on Select Contracts.
We know it takes great people to do great work, so if you're interested in joining the APA Services family, give us a call at:

(817)529-4000

Thanks for taking the time to visit APA Services and we look forward to working with you soon.

Browse All Jobs