Jobs Available

1 - 10 of 40 Matches
Featured job

VIP Interior Installer (MRO) SR

Midwest (Indianapolis, IN)
Posted on 11/20/2024

Under minimal supervision, install fabricated aircraft interiors including cabinetry components, galleys, closets, divans, lavatories, side ledges, bulkheads, trim, panels, carpet and other similar accessories in for the completion of VIP aircraft.

Essential Duties and Responsibilities

Install fabricated aircraft interior components. Interpret material specs and engineering drawings to ensure installed interiors meets the design spec, quality standards and customer expectations. Request material needs timely to ensure a continuous workflow. Adheres to all regulatory documentation regarding proper sign off, component installation, etc. Ensure paperwork is complied with and completed timely in accordance with the client RSQM and other quality standards. Follows all department safety guidelines and ensure proper usage of tools and equipment. Intermediate knowledge of company installation procedures, process specs, IOPs, etc. Other duties as assigned but not covered herein.

Requirements

8+ years Interior Install experience, preferably in the corporate aviation completion environment. High School Diploma, or GED. Relevant trade school attendance is a plus. Advanced knowledge of the Interior Installation process as it specifically relates to the corporate aviation industry, in a completions environment. Ability to read, write, speak, and understand the English language. Ability to read and interpret blueprints and engineering documentation. Strong knowledge and expertise with all aspects of the Interior Installation process. Knowledge of the RSQM and FAA requirements as it relates to Interior Installation. Working knowledge of computers. Working knowledge of lean or other continuous improvement opportunity techniques. Ability to communicate in an assertive yet professional, motivating and tactful manner.

Miscellaneous

The work environment described here is representative of those required by an employee to perform the essential functions of this job with or without reasonable accommodations. The location where this position works is in the back shop of an aircraft hangar environment which could be subject to weather changes and is subject to constant exposure to loud noise, potential contact with hazardous waste material, heavy machinery and other safety hazards such as cabinets, etc. PHYSICAL DEMANDS: The physical demands described here is representative of those required by an employee to perform the essential functions of this job with or without reasonable accommodations.

About Our Client

Our Client is continuously innovating in the large to very large business jet aircraft segment engineering luxury into our cabin completions, upgrades and refurbishments. Located in Indianapolis, Indiana our client has established itself as one of the most unique and modern completion & service centers in the world exclusively for Airbus Corporate Jets, Boeing Business Jets, Bombardier Business aircraft and Sukhoi Business Jets.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

685422925775297

Featured job

Interior Installation Tech II

Southeast (Savannah, GA)
Posted on 11/19/2024

The Interior Installation Technician II works under general supervision to remove, install, and/or fabricate aircraft interiors, which may include items such as trim, carpet, sound proofing, light structure, cabinetry, panels and other accessories. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations.

Essential Duties and Responsibilities

Safely perform aircraft removal, installation, and/or fabrication of aircraft interiors (which may include galleys, closets, lavatories, side ledges, bulkheads, doors and panels). Coordinate with supervision and Inspection to ensure compliance with Repair Station procedures, internal and FAA paperwork, signoffs and quality specifications. Use the material tracking system to create parts demand, track squawks and to sign-off work. Follow standard operating procedures when using tools and equipment such as hand tools, band saws, shears, sanders and brakes. Properly care for and maintain shop equipment and tools. Prepare and install aircraft interior items in accordance with company operation procedures and quality standards. Remove and re-install nut plates, inserts and other fasteners used in aircraft interiors. Apply proper use of hardware and fittings on aircraft installations. Comply with safety, 5S, and housekeeping policies and use personal protective equipment as required. Address unsafe conditions before putting people or property at risk. Assist technicians, under supervision, with aircraft maintenance requirements. Adapt to sudden schedule changes. Additional Functions: Work with lead and higher skilled technicians to develop and implement process improvements that reduce cost, cycle time, and man-hours using Lean Six Sigma and other process improvement techniques. Make and use simple patterns for own use employing standardized procedures. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.

Requirements

Education and Experience Requirements High School Diploma or GED required. 2 years of application installation, fabrication or related experience. preferred. Experience in aerospace industry. Other Requirements: Ability to read, write, speak, and understand the English language. Ability to read and interpret blueprints and engineering documentation. Ability to use hand/power tools and equipment associated with installation and removal of interiors. Able to climb ladders and stairs, work in small, restricted areas, lift up to 40 pounds and work any shift. Must be computer literate. Excellent communication skills, both verbal and written.

Miscellaneous

About Our Client

Our client has led the evolution of business and personal aviation since the 1958 debut of the world’s first purpose-built business aircraft. Today, they produce the world’s most advanced business aircraft, with innovations from nose to tail and wingtip to wingtip, all while offering unmatched global product support and service.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

175365150376372

Featured job

Interior Mechanic

Southeast (Tampa, FL)
Posted on 11/19/2024

Seeking Interior Aircraft Mechanics in Tampa, FL

Essential Duties and Responsibilities

Remove and replace various aircraft components and electrical systems with the use of special tooling and ground support equipment Follow oral and written instructions such as supervisor’s directives and manuals to complete all routine and non-routine assignments in a timely manner. Analyze all repairs deciding independent methods and procedures to accomplish assignments.

Requirements

2+ years of recent Interior experience on heavy commercial aircraft preferred but will also accept experience on helicopters, military aircraft, and regional jets. Must have basic set of tools, must be etched. Must meet the qualifications to obtain a SIDA badge. High School diploma or equivalent. Must be available to work any shift. (3 shifts; our client is a 24/7 facility)

Miscellaneous

MUST be able to pass a 10 year federal background check in order to obtain an airport security badge. Must bring tools.

About Our Client

For more than five decades our clients pedigree has been earned by providing customers worldwide extraordinary maintenance, repair and overhaul (MRO) service and freighter conversions.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

196294490103347

Featured job

Interior Install Tech II

South Central (Dallas, TX)
Posted on 11/18/2024

The Interior Installation Technician II works under general supervision to remove, install, and/or fabricate aircraft interiors, which may include items such as trim, carpet, sound proofing, light structure, cabinetry, panels and other accessories. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations.

Essential Duties and Responsibilities

Essential Functions: Safely perform aircraft removal, installation, and/or fabrication of aircraft interiors (which may include galleys, closets, lavatories, side ledges, bulkheads, doors and panels). Coordinate with supervision and Inspection to ensure compliance with Repair Station procedures, internal and FAA paperwork, sign-offs and quality specifications. . Use the material tracking system to create parts demand, track squawks and to sign-off work. Follow standard operating procedures when using tools and equipment such as hand tools, band saws, shears, sanders and brakes. Properly care for and maintain shop equipment and tools. Prepare and install aircraft interior items in accordance with company operation procedures and quality standards. Remove and re-install nut plates, inserts and other fasteners used in aircraft interiors. Apply proper use of hardware and fittings on aircraft installations. Comply with safety, 5S, and housekeeping policies and use personal protective equipment as required. Address unsafe conditions before putting people or property at risk. Assist technicians, under supervision, with aircraft maintenance requirements. Adapt to sudden schedule changes. Additional Functions: Work with lead and higher skilled technicians to develop and implement process improvements that reduce cost, cycle time, and man-hours using Lean Six Sigma and other process improvement techniques. . Make and use simple patterns for own use employing standardized procedures. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.

Requirements

High School Diploma or GED required. 2 years of applicable installation, fabrication or related experience. Experience in aerospace industry preferred.. Other Requirements: Ability to read, write, speak, and understand the English language. Ability to read and interpret blueprints and engineering documentation. Ability to use hand/power tools and equipment associated with installation and removal of interiors. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. Must be computer literate. Excellent communication skills, both verbal and written. Must be able to read, write, speak, and understand the English language.

Miscellaneous

About Our Client

Our client has led the evolution of business and personal aviation since the 1958 debut of the the world’s first purpose-built business aircraft. Today, they produce the world’s most advanced business aircraft, with innovations from nose to tail and wingtip to wingtip, all while offering unmatched global product support and service

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

192901831437515

Featured job

Interior Install Technician Sr

South Central (Dallas, TX)
Posted on 11/18/2024

The Interior Installation Technician Senior works under limited supervision to remove, install, and/or fabricate aircraft interiors, which may include items such as trim, carpet, sound proofing, light structure, cabinetry, panels and other accessories. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations. Mentor and train other Interior Installation Technicians.

Essential Duties and Responsibilities

Essential Functions: Safely perform aircraft interior removal, installation, and/or fabrication of aircraft interiors (which may include galleys, closets, lavatories, side ledges, bulkheads, doors and panels). . Coordinate with supervision and Inspection to ensure compliance with Repair Station procedures, internal and FAA paperwork, sign-offs and quality specifications. . Mentor and train other Interior Installation Technicians. Review their work prior to sign off to ensure work complies with quality control standards. Accept lead responsibilities as required. Oversee projects or other technicians and assess requirements of assigned tasks to procure required. materials and documentation for assigned tasks. Utilize the material tracking system to create parts demand, track squawks and to sign-off work. Follow standard operating procedures when using tools and equipment such as hand tools, band saws, shears, sanders and brakes. Properly care for and maintain shop equipment and tools. Prepare and install aircraft interior items in accordance with company operation procedures and quality standards. Remove and re-install nut plates, inserts and other fasteners used in aircraft interiors. Apply proper use of hardware and fittings on aircraft installations. Comply with safety, 5S, and housekeeping policies and use personal protective equipment as required. Address unsafe conditions before putting people or property at risk. Assist technicians with aircraft maintenance requirements. Adapt to sudden schedule changes and coordinate projects with other shops/departments as required. Additional Functions: Work with lead and higher skilled technicians to develop and implement process improvements that reduce cost, cycle time, and man-hours using Lean Six Sigma and other process improvement techniques. . Make and use simple patterns for own use employing standardized procedures. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.

Requirements

High School Diploma or GED required. 4 years of applicable installation, fabrication or related experience. Experience in aerospace industry preferred.. Other Requirements: Ability to read and interpret blueprints and engineering documentation. Ability to use hand/power tools and equipment associated with installation and removal of interiors. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. Must be computer literate. Excellent communication skills, both verbal and written. Advanced knowledge of aircraft installation and/or fabrication processes applicable to the specific position, such as removal and installation of galleys, closets, lavatories, side ledges, bulkheads, doors, panels; working with composite panels made from Nomex honeycomb, fiberglass, Lexan, acrylic materials, etc. Must be able to read, write, speak, and understand the English language. Must be fluent in English.

Miscellaneous

About Our Client

Our client has led the evolution of business and personal aviation since the 1958 debut of the the world’s first purpose-built business aircraft. Today, they produce the world’s most advanced business aircraft, with innovations from nose to tail and wingtip to wingtip, all while offering unmatched global product support and service

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

622159106876205

Featured job

Interior Installation Tech Sr

Southeast (Savannah, GA)
Posted on 11/18/2024

The Interior Installation Technician Senior works under limited supervision to remove, install, and/or fabricate aircraft interiors, which may include items such as trim, carpet, sound proofing, light structure, cabinetry, panels and other accessories. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations. Mentor and train other Interior Installation Technicians.

Essential Duties and Responsibilities

Essential Functions: Safely perform aircraft interior removal, installation, and/or fabrication of aircraft interiors (which may include galleys, closets, lavatories, side ledges, bulkheads, doors and panels). . Coordinate with supervision and Inspection to ensure compliance with Repair Station procedures, internal and FAA paperwork, sign-offs and quality specifications. . Mentor and train other Interior Installation Technicians. Review their work prior to sign off to ensure work complies with quality control standards. Accept lead responsibilities as required. Oversee projects or other technicians and assess requirements of assigned tasks to procure required. materials and documentation for assigned tasks. Utilize the material tracking system to create parts demand, track squawks and to sign-off work. Follow standard operating procedures when using tools and equipment such as hand tools, band saws, shears, sanders and brakes. Properly care for and maintain shop equipment and tools. Prepare and install aircraft interior items in accordance with company operation procedures and quality standards. Remove and re-install nut plates, inserts and other fasteners used in aircraft interiors. Apply proper use of hardware and fittings on aircraft installations. Comply with safety, 5S, and housekeeping policies and use personal protective equipment as required. Address unsafe conditions before putting people or property at risk. Assist technicians with aircraft maintenance requirements. Adapt to sudden schedule changes and coordinate projects with other shops/departments as required. Additional Functions: Work with lead and higher skilled technicians to develop and implement process improvements that reduce cost, cycle time, and man-hours using Lean Six Sigma and other process improvement techniques. . Make and use simple patterns for own use employing standardized procedures. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. . Perform other duties as assigned. Other Requirements: Fluent in the English language. Must have the ability to read, write, speak, and understand English. Ability to read and interpret blueprints and engineering documentation. Ability to use hand/power tools and equipment associated with installation and removal of interiors. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. Must be computer literate. Excellent communication skills, both verbal and written. Advanced knowledge of aircraft installation and/or fabrication processes applicable to the specific position, such as removal and installation of galleys, closets, lavatories, side ledges, bulkheads, doors, panels; working with composite panels made from Nomex honeycomb, fiberglass, Lexan, acrylic materials, etc.

Requirements

High School Diploma or GED required. 4 years of application installation, fabrication or related experience. preferred. Aerospace industry experience. Preferred experience with SAP, Catia V5, Smarteam, Solumina, and Microsoft Office Suite.

Miscellaneous

Preferred experience with SAP, Catia V5, Smarteam, Solumina, and Microsoft Office Suite.

About Our Client

Our client has led the evolution of business and personal aviation since the 1958 debut of the world’s first purpose-built business aircraft. Today, they produce the world’s most advanced business aircraft, with innovations from nose to tail and wingtip to wingtip, all while offering unmatched global product support and service.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

671447662886553

Featured job

VIP Interior Installer (MRO)

Midwest (Indianapolis, IN)
Posted on 11/15/2024

Under minimal supervision, install fabricated aircraft interiors including cabinetry components, galleys, closets, divans, lavatories, side ledges, bulkheads, trim, panels, carpet and other similar accessories in for the completion of VIP aircraft.

Essential Duties and Responsibilities

Install fabricated aircraft interior components. Interpret material specs and engineering drawings to ensure installed interiors meets the design spec, quality standards and customer expectations. Request material needs timely to ensure a continuous workflow. Adheres to all regulatory documentation regarding proper sign off, component installation, etc. Ensure paperwork is complied with and completed timely in accordance with the client RSQM and other quality standards. Follows all department safety guidelines and ensure proper usage of tools and equipment. Intermediate knowledge of company installation procedures, process specs, IOPs, etc. Other duties as assigned but not covered herein.

Requirements

6+ years Interior Install experience, preferably in the corporate aviation completion environment. High School Diploma, or GED. Relevant trade school attendance is a plus. Advanced knowledge of the Interior Installation process as it specifically relates to the corporate aviation industry, in a completions environment. Ability to read, write, speak, and understand the English language. Ability to read and interpret blueprints and engineering documentation. Strong knowledge and expertise with all aspects of the Interior Installation process. Knowledge of the RSQM and FAA requirements as it relates to Interior Installation. Working knowledge of computers. Working knowledge of lean or other continuous improvement opportunity techniques. Ability to communicate in an assertive yet professional, motivating and tactful manner.

Miscellaneous

The work environment described here is representative of those required by an employee to perform the essential functions of this job with or without reasonable accommodations. The location where this position works is in the back shop of an aircraft hangar environment which could be subject to weather changes and is subject to constant exposure to loud noise, potential contact with hazardous waste material, heavy machinery and other safety hazards such as cabinets, etc. PHYSICAL DEMANDS: The physical demands described here is representative of those required by an employee to perform the essential functions of this job with or without reasonable accommodations.

About Our Client

Our Client is continuously innovating in the large to very large business jet aircraft segment engineering luxury into our cabin completions, upgrades and refurbishments. Located in Indianapolis, Indiana our client has established itself as one of the most unique and modern completion & service centers in the world exclusively for Airbus Corporate Jets, Boeing Business Jets, Bombardier Business aircraft and Sukhoi Business Jets.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

139773391877577

Featured job

Aircraft Mechanic II (A)

midwest (Lincoln, NE)
Posted on 11/18/2024

The Aircraft Mechanic II, with limited supervision, assists with testing, adjusting and repairing, and other general tasks related to the maintenance and repair of a airframe systems and components on a variety of airframes in a safe and clean work environment according to manufacturer’s specifications, company approved procedures and customer specifications. In addition, this position prepares and completes appropriate documentation in a timely manner.

Essential Duties and Responsibilities

With limited supervision, assists in high quality inspections, servicing, and maintenance of airframe systems and components on a variety of airframes, using proper hand tools in a timely, clean, safe and professional manner with no rework. Accurately order general aircraft parts as needed. With limited supervision, performs minor troubleshooting, function testing, and repair of aircraft systems and components. Prepares various documents for record keeping purposes, as required by Company policy and FAA regulations (i.e. turnovers, removal sheets, personal training log, etc.). Demonstrates proficiency of Duncan Aviation work order system by completing accurate and timely discrepancies and corrective action statements, Service Bulletins and Airworthiness Directives (AD) Compliance statements, final inspection and closing of squawks and work orders. Consistently locates and uses appropriate technical data and follows verbal instructions when accomplishing assigned maintenance tasks. Performs other related duties as assigned by management.

Requirements

Airframe license required; powerplant preferred. 2+ years aircraft airframe maintenance experience required Previous Corporate Aviation or MRO experience is preferred High school graduate or equivalent required Experience in leading aviation maintenance projects is preferred Must have valid driver’s license and acceptable driving record; Respirator Fit qualified; Man Lift qualified; tool inventory per department tool list required

Miscellaneous

Attendance: Regularly scheduled attendance required. Physical: Routinely lifts up to 50 lbs. and occasionally up to 100 lbs.; reads small print; hears sounds associated with mechanical deficiencies; repetitive motion; works with moving parts and vibration; tolerates products, materials and fumes associated with aircraft maintenance; tolerates working in confined spaces and heights above four feet; tolerates walking, bending, kneeling, stooping, crouching, crawling, climbing and sitting. Environmental: Tolerates working in extreme temperatures and in noisy environments. Work Schedule: Must be available for all shifts.

About Our Client

Our client is the largest privately owned business jet service provider in the world, known for its dedication to quality and customer service. With a rich history dating back to 1956, our client offers a comprehensive range of services, including airframe and engine maintenance, avionics installations and repair, interior and paint refurbishments, and aircraft sales and acquisitions. Operating from several full-service locations and numerous satellite shops across the United States, our client is committed to providing innovative solutions and maintaining the highest standards in the aviation industry.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

213868345023140

Featured job

Aircraft Mechanic I (A&P)

midwest (Lincoln, NE)
Posted on 11/18/2024

The Aircraft Mechanic I, with limited supervision, assists with testing, adjusting and repairing, and other general tasks related to the maintenance and repair of airframe systems and components on all models of Learjet business jets. Performs maintenance in a safe and clean work environment according to manufacturer's specifications, company approved procedures and customer specifications. In addition, prepares and completes appropriate documentation in a timely manner.

Essential Duties and Responsibilities

With proper training and limited supervision can perform high quality inspections, servicing, and maintenance on a variety of airframes. Can properly use hand tools in a timely, clean, safe and professional manner with no rework. Can accurately order general aircraft parts as needed. With proper training and limited supervision, performs minor troubleshooting, function testing, and repair of aircraft systems and components. Prepares various documents for record keeping purposes, as required by Company policy and FAA regulations (i.e. turnovers, removal sheets, personal training log, etc.). Demonstrates proficiency of the Duncan Aviation work order system by completing accurate and timely discrepancies and corrective action statements, Service Bulletins and Airworthiness Directives (AD) Compliance statements, final inspection and closing of squawks and work orders. Consistently locates and uses appropriate technical data and follows verbal instructions when accomplishing assigned maintenance tasks. Performs other related duties as assigned by management.

Requirements

One to two years Aircraft maintenance experience required High School graduate or equivalent required. FAA Airframe Maintenance Certificate required FAA Powerplant Certificate required Must have valid drivers license with acceptable driving record

Miscellaneous

Attendance: Regularly scheduled attendance required. Physical: Routinely lifts up to 50 lbs. and occasionally up to 100 lbs.; reads small print; hears sounds associated with mechanical deficiencies; repetitive motion; works with moving parts and vibration; tolerates products, materials and fumes associated with aircraft maintenance; tolerates working in confined spaces and heights above four feet; tolerates walking, bending, kneeling, stooping, crouching, crawling, climbing and sitting. Environmental: Tolerates working in extreme temperatures and in noisy environments. Work Schedule: Must be available for all shifts.

About Our Client

Our client is the largest privately owned business jet service provider in the world, known for its dedication to quality and customer service. With a rich history dating back to 1956, our client offers a comprehensive range of services, including airframe and engine maintenance, avionics installations and repair, interior and paint refurbishments, and aircraft sales and acquisitions. Operating from several full-service locations and numerous satellite shops across the United States, our client is committed to providing innovative solutions and maintaining the highest standards in the aviation industry.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

122694813858177

Featured job

Aircraft Mechanic II (A&P)

midwest (Lincoln, NE)
Posted on 11/18/2024

The Aircraft Mechanic II, with limited supervision, assists with testing, adjusting and repairing, and other general tasks related to the maintenance and repair of a airframe systems and components on a variety of airframes in a safe and clean work environment according to manufacturer’s specifications, company approved procedures and customer specifications. In addition, this position prepares and completes appropriate documentation in a timely manner.

Essential Duties and Responsibilities

With limited supervision, assists in high quality inspections, servicing, and maintenance of airframe systems and components on a variety of airframes, using proper hand tools in a timely, clean, safe and professional manner with no rework. Accurately order general aircraft parts as needed. With limited supervision, performs minor troubleshooting, function testing, and repair of aircraft systems and components. Prepares various documents for record keeping purposes, as required by Company policy and FAA regulations (i.e. turnovers, removal sheets, personal training log, etc.). Demonstrates proficiency of Duncan Aviation work order system by completing accurate and timely discrepancies and corrective action statements, Service Bulletins and Airworthiness Directives (AD) Compliance statements, final inspection and closing of squawks and work orders. Consistently locates and uses appropriate technical data and follows verbal instructions when accomplishing assigned maintenance tasks. Performs other related duties as assigned by management.

Requirements

Airframe & Powerplant license required 2+ years aircraft airframe maintenance experience required Previous Corporate Aviation or MRO experience is preferred High school graduate or equivalent required Experience in leading aviation maintenance projects is preferred Must have valid driver’s license and acceptable driving record; Respirator Fit qualified; Man Lift qualified; tool inventory per department tool list required

Miscellaneous

Attendance: Regularly scheduled attendance required. Physical: Routinely lifts up to 50 lbs. and occasionally up to 100 lbs.; reads small print; hears sounds associated with mechanical deficiencies; repetitive motion; works with moving parts and vibration; tolerates products, materials and fumes associated with aircraft maintenance; tolerates working in confined spaces and heights above four feet; tolerates walking, bending, kneeling, stooping, crouching, crawling, climbing and sitting. Environmental: Tolerates working in extreme temperatures and in noisy environments. Work Schedule: Must be available for all shifts.

About Our Client

Our client is the largest privately owned business jet service provider in the world, known for its dedication to quality and customer service. With a rich history dating back to 1956, our client offers a comprehensive range of services, including airframe and engine maintenance, avionics installations and repair, interior and paint refurbishments, and aircraft sales and acquisitions. Operating from several full-service locations and numerous satellite shops across the United States, our client is committed to providing innovative solutions and maintaining the highest standards in the aviation industry.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

138983777184157

Benefits of working with APA Services

Weekly Payroll, Medical Insurance Available, Cash Advances, Travel Pay and/or bonuses on Select Contracts.
We know it takes great people to do great work, so if you're interested in joining the APA Services family, give us a call at:

(817)529-4000

Thanks for taking the time to visit APA Services and we look forward to working with you soon.

Browse All Jobs