Jobs Available

1 - 10 of 86 Matches
Featured job

QC Inspector B (Backshop)

South Central (Little Rock, AR)
Posted on 7/23/2024

Inspect parts and components to known standards to insure conformity of products including cosmetic acceptability. Conducts interior shell component and in-process inspections. Verifies parts and components conform to approved data. Properly document all inspections and verifications.

Essential Duties and Responsibilities

Interpret data, CATIA models, company standards, work instructions, and perform necessary calculations using shop math to conform detail parts, tooling, assemblies and installations and document results. Perform complete inspection of components, major assemblies, sub-assemblies, production tools or parts during manufacturing, modifications, repairs & installations to determine safety or conformity to approved data & company standards & specifications. Properly documents findings and actions taken. Interpret and verify per complex data, engineering change orders and governmental regulatory procedures and specifications and properly document results. Apply technical knowledge in the fields of manufacturing and assembly, plumbing, electrical, etc. to determine conformity, approval for return to service, & airworthiness. Use precision measuring guides, gauges and laboratory type instruments. Suggest dispositions of damaged or worn parts and the possibility of salvage based on company practices or procedures. Be familiar with relative FAA/EASA regulations and requirements. Be familiar with regulatory processes. Prepare necessary customer and/or company documents. Complete and maintain reports and records as required. Assist other personnel on specific job assignments as requested by Quality Management. Maintain a clean and organized work area. Complete tasks accurately and thoroughly. May perform inspections of incoming purchased parts and products. May perform inspections of out going parts and products being shipped from DFJC. Work in a safe manner in accordance with OSHA and company safety regulations/procedures.

Requirements

High school diploma or equivalent. Two (2) years experience in an aircraft or aeronautical environment. Must possess above average verbal, written skills and interpersonal communication skills. Must possess well-developed critical thinking, logic and analytical skills. Able to work from heights or small-enclosed areas for short periods with or without reasonable accommodation. Able to climb, stoop, bend, kneel, and/or work from unleveled surfaces with or without reasonable accommodation. Ability to read and interpret complex drawings, 3D models and specifications. Able to use precision measuring tools, gauges and laboratory type instruments. Must possess computer literacy with the ability to learn new applications. Must be pro-active and team oriented. Pass vision testing, minimum 20/20 corrected, and with no limitations in color perception. Preferred - Regulatory issued Airframe & Powerplant (A & P) license. Preferred - Able to work unsupervised for short periods. Preferred - Aircraft/aviation experience specific to the area of assignment (e.g., upholstery, cabinet, etc.)

Miscellaneous

WORKING CONDITIONS:Normal working conditions would be in a controlled environment. However, candidate could be required to work for short periods of time in an uncontrolled environment. (Outside)

About Our Client

Our partner is a French aerospace company with proven dual expertise as a manufacturer of both military aircraft and business jets. They are a pioneer in the use of CATIA™, the 3D CAD / CAM system that has become a global standard. They are a creator of more than 100 prototypes in the last century, with over 10,000 aircraft delivered to 90 countries.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

165219259267477

Featured job

Aircraft Inspector

West (Everett, WA)
Posted on 7/23/2024

An Aircraft Inspector will conduct all required inspections in accordance with the applicable Federal Aviation Regulations, manufacturer’s approved data, any customer’s approved program data.

Essential Duties and Responsibilities

Record the results of all inspections performed on the proper inspection forms used by the repair station in accordance with this Inspection Procedures Manual. Be thoroughly familiar with the applicable Federal Aviation Regulations, specifications, tolerances, limits, inspection methods, techniques, and equipment used in their area of responsibility to determine the quality of the work performed and the airworthiness of the article. Maintain proficiency with various types of inspection aides used for the inspection of a particular item. Conduct all required inspections in accordance with the applicable Federal Aviation Regulations, manufacturer’s approved data, any customer’s approved program data, and the policies and procedures contained in this Inspection Procedures Manual. Ensure current specifications involving inspection tolerances, limits, and procedures recommended by the manufacturer of the product undergoing inspection and other forms of applicable inspection information are available for reference. Other examples of inspection information would be FAA Airworthiness Directives, manufacturer’s bulletins, approved customer data, and Federal Aviation Regulations. Make final airworthiness determination prior to “Return of Service” on items they are authorized to inspect for any article maintained or altered by this repair station. Reject any work or parts that have not been properly maintained or altered in accordance with Federal Aviation Regulations, manufacturer’s approved data, customer approved data and the policies and procedures contained within this manual. Support the company Safety Program

Requirements

Minimum of three (3) years of heavy aircraft maintenance experience OR equivalent combination of education and experience on 737/767/Airbus/Next Gen GEN FAM – 737, NextGen, A320 - PREFERRED Active A&P License Must have own tools

Miscellaneous

Must report with two forms of employment eligibility identification

About Our Client

Headquartered in Everett, Washington, with additional operations in Moses Lake, Washington; Kansas City, Missouri; and Fort Worth, Texas. This national MRO network provides seamless support for military, commercial and regional aircraft operators – including airframe maintenance, component repair, engineering support, fuselage painting, and business jet services.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

984465724624370

Inspector Sr.

South Central (Roswell, NM)
Posted on 7/23/2024

Aviation inspectors review all procedures, equipment, and systems on an aircraft to ensure it meets federal safety regulations.

Essential Duties and Responsibilities

Check equipment, instruments, and systems. Inspect landing gear, tires, and exteriors of fuselage, wings, and engines for evidence of damage or corrosion. Identify damage and defects in grounded plane. Insure that new parts and work meet FAA specs and requirements.

Requirements

Current A&P License 5+ years of recent inspection experience paint shop inspection experience highly preferred Inspector should have strong mechanical abilities and knowledge, be incredibly detail-oriented and thorough, and be skilled at working with complex information and equipment.

Miscellaneous

About Our Client

Our client is an aircraft painting company committed to providing its customers unsurpassed quality and dependable return-to-service times at competitive prices. Our client has several domestic facilities and is equipped to process commercial, regional, military, or VIP Corporate aircraft.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

641726980261517

Featured job

QC Inspector

Midwest (Kansas City, MO)
Posted on 7/19/2024

The Quality Control Inspector ensures all maintenance work, including documentation, is performed in an airworthy manner and in compliance with approved technical data. This position is also responsible for preliminary, routine and in-process inspections on aircraft and components to determine serviceability and airworthiness.

Essential Duties and Responsibilities

Performs incoming preliminary inspections on aircraft or components in accordance with customer request cards or manufacturer’s manuals. Ensures documentation of maintenance performed is completed as required by FAR’s, Repair Station Manual and customer’s Continuous Airworthiness Maintenance Program (CAMP). Completes final buy-back of maintenance performed. Performs in-progress inspections including clearance-to-close, torque verifications, dimensional checks and rigs. Performs return-to-service and airworthiness releases on serviceable tags, aircraft logbooks, and FAA form 337 as authorized by the MRO and airlines. Documents on-the-job training (OJT) and experience for inclusion into training file. Performs audit of the facilities for FAR and safety regulation compliance. Monitors compliance to scrap bin policy. Be available on the floor to provide oversight, guidance and assistance. Regular and predictable attendance. Effective and appropriate conduct with co-workers.

Requirements

Previous Commercial MRO experience - Highly skilled Minimum of three (3) years of heavy aircraft maintenance experience OR equivalent combination of education and experience Experience on 737/767/Airbus/Next Gen GEN FAM – 737, NextGen, A320 - required F.A.A. Airframe and Powerplant (A&P) License - required. Ability to interpret technical and regulatory documentation accurately. Ability to effectively communicate verbally and in writing. Ability to interact and communicate with all levels of personnel. Basic computer skills and working knowledge of MS Office (Outlook, Word, Excel). Ability to learn airline customer RII requirements. Excellent attention to detail. Familiar with inspection tools, aids and devices used in determining tolerances, specifications, and progress. Ability to work a variety of shift schedules and shift hours.

Miscellaneous

Duties shall include observing all company, health, safety and environmental rules, ensure provision of full information on area specific safety orientation, identify all unique hazards, and are provided with the proper equipment to carry out the job in a safe manner. Also, the entire work area must be routinely inspected to maintain a high standard of housekeeping and low incidence of physical hazards and all accidents must be promptly reported.

About Our Client

This client is headquartered in Everett, Washington, with additional operations in Moses Lake, Washington; Kansas City, Missouri; and Fort Worth, Texas. This national MRO network provides seamless support for military, commercial and regional aircraft operators – including airframe maintenance, component repair, engineering support, fuselage painting, and business jet services.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

699757900015068

Featured job

Aircraft Inspector

Southeast (Dothan, AL)
Posted on 7/19/2024

The Aircraft Inspector will conduct all required inspections in accordance with the applicable Federal Aviation Regulations, manufacturer’s approved data, any customer’s approved program data.

Essential Duties and Responsibilities

Conduct all required inspections in accordance with the applicable Federal Aviation Regulations, manufacturer’s approved data, any customer’s approved program data, and the policies and procedures contained in this Inspection Procedures Manual. Record the results of all inspections performed on the proper inspection forms used by the repair station in accordance with this Inspection Procedures Manual. Be thoroughly familiar with the applicable Federal Aviation Regulations, specifications, tolerances, limits, inspection methods, techniques, and equipment used in their area of responsibility to determine the quality of the work performed and the airworthiness of the article. Maintain proficiency with various types of inspection aides used for the inspection of a particular item. Ensure current specifications involving inspection tolerances, limits, and procedures recommended by the manufacturer of the product undergoing inspection and other forms of applicable inspection information are available for reference. Other examples of inspection information would be FAA Airworthiness Directives, manufacturer’s bulletins, approved customer data, and Federal Aviation Regulations. Make final airworthiness determination prior to “Return of Service” on items they are authorized to inspect for any article maintained or altered by this repair station. Reject any work or parts that have not been properly maintained or altered in accordance with Federal Aviation Regulations, manufacturer’s approved data, customer approved data and the policies and procedures contained within this manual. Support the company Safety Program

Requirements

Minimum 5 years’ experience as an Inspector or Structural or Aircraft Technician, Heavy Commercial experience REQUIRED. Active A&P License required. Preferred 737, MD80 Experience. Must have own tools Must be able to read, write and speak the English language.

Miscellaneous

Candidates must report on day 1 with 2 forms of acceptable identification to identify employment eligibilityInspectors are required to report on day 1 with all training recordsInspectors will be sent for an eye exam upon arrival

About Our Client

Our Client provides turn-key aircraft maintenance, repair and overhaul (MRO) services for a wide array of commercial and military aircraft. As an independent FAA EASA approved repair station, our client’s services include scheduled and non-scheduled passenger airlines, cargo operators and leasing company’s maintenance.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

521998137038418

Featured job

Quality Inspector

South Central (Carrollton, TX)
Posted on 7/19/2024

APA Services is seeking a meticulous and detail-oriented Quality Inspector to join our team in Carrollton, TX. The Quality Inspector will be responsible for ensuring the highest standards of quality in the manufacturing of composite aerospace components. The ideal candidate will possess a keen eye for detail, a strong understanding of quality control processes, and the ability to work effectively in a fast-paced environment.

Essential Duties and Responsibilities

Perform detailed inspections of composite aerospace components to ensure compliance with specifications, blueprints, and industry standards. Utilize precision measuring instruments such as calipers, micrometers, and gauges to verify dimensions and tolerances. Conduct visual inspections to identify defects, inconsistencies, or deviations from quality standards. Document inspection results and maintain accurate records of findings. Collaborate with production and engineering teams to resolve quality issues and implement corrective actions. Participate in root cause analysis and continuous improvement initiatives. Ensure compliance with company policies, safety regulations, and quality management systems. Conduct audits of manufacturing processes to ensure adherence to established procedures and standards. Provide training and guidance to production staff on quality control practices and procedures. Assist in the development and implementation of quality control plans and inspection protocols.

Requirements

High school diploma or equivalent; technical degree or certification in quality control or a related field preferred. Minimum of 3 years of experience in quality inspection, in the aerospace industry. A&P License Proficiency in using precision measuring instruments and inspection tools. Strong understanding of geometric dimensioning and tolerancing (GD&T). Familiarity with quality management systems (e.g., ISO 9001, AS9100) and regulatory requirements. Excellent attention to detail and problem-solving skills. Ability to read and interpret engineering drawings, specifications, and work instructions. Strong communication and interpersonal skills. Proficient in Microsoft Office Suite (Word, Excel, Outlook). Ability to work independently and as part of a team in a fast-paced environment. Willingness to work flexible hours, including overtime and weekends, as needed.

Miscellaneous

Tools are required

About Our Client

Employee turnover rate of less than 1% in our 8 year history. Our mechanics have a combined 150+ years of aviation and composite experience. Reputation with our customers for streamlining repair processes. Lean, six-sigma, kiazen have been applied to realistic segments of our business. Vast and growing capabilities with precise focus on composite technology and industry trends. Interior and Exterior composite products. "A" Class Quality is instilled across the organization. Audited seamless processes and integrity will result in a quality component delivery. Priority on turn time demands by product and customer. Tracking and status parameters ensure the turn time is met for the supply needs.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

138899147093439

Featured job

Aircraft Inspector III

West (Goodyear, AZ)
Posted on 7/18/2024

The Aircraft Inspector will conduct all required inspections in accordance with the applicable Federal Aviation Regulations, manufacturer’s approved data, any customer’s approved program data.

Essential Duties and Responsibilities

Accept or reject work accomplished for all items generated on the inspection forms. Responsible for the surveillance of all work in progress. Assure that all work inspected is in accordance with current FAA approved technical data. Assure that all routine, non-routine, and customer request work cards are correctly completed and properly signed off. Verify calibrated tooling used is current. Assist the Director of Maintenance, Maintenance Manager, and Chief Inspector to ensure health and safety practices are followed. This is a safety sensitive position and is subject to submit to pre-employment and periodic DOT regulations for drug and alcohol testing. Perform any other duties as assigned by the Lead Inspector.

Requirements

5+ years aircraft inspection experience Current and Active A&P License Must have own tools High School Diploma or GED Successfully complete a comprehensive background check, verification of credentials, and a urinary pre-employment test for drugs as per the DOT regulations Attention to detail is imperative. Must be able to multi-task Be efficient with a desire to succeed. Strong verbal and written communication skills Exhibit a high level of confidentiality with work product.

Miscellaneous

About Our Client

Our Client provides aftermarket commercial aircraft, engines, and its parts to passenger and cargo airlines, leasing companies, original equipment manufacturers, and government and defense contractors, as well as maintenance, repair, and overhaul (MRO) service providers worldwide. They were founded in 2008 and are headquartered in Florida.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

111064967152422

Featured job

Aircraft Inspector

Midwest (Great Falls, MT)
Posted on 7/18/2024

An Aircraft Inspector will conduct all required inspections in accordance with the applicable Federal Aviation Regulations, manufacturer’s approved data, any customer’s approved program data.

Essential Duties and Responsibilities

Record the results of all inspections performed on the proper inspection forms used by the repair station in accordance with this Inspection Procedures Manual. Be thoroughly familiar with the applicable Federal Aviation Regulations, specifications, tolerances, limits, inspection methods, techniques, and equipment used in their area of responsibility to determine the quality of the work performed and the airworthiness of the article. Maintain proficiency with various types of inspection aides used for the inspection of a particular item. Conduct all required inspections in accordance with the applicable Federal Aviation Regulations, manufacturer’s approved data, any customer’s approved program data, and the policies and procedures contained in this Inspection Procedures Manual. Ensure current specifications involving inspection tolerances, limits, and procedures recommended by the manufacturer of the product undergoing inspection and other forms of applicable inspection information are available for reference. Other examples of inspection information would be FAA Airworthiness Directives, manufacturer’s bulletins, approved customer data, and Federal Aviation Regulations. Make final airworthiness determination prior to “Return of Service” on items they are authorized to inspect for any article maintained or altered by this repair station. Reject any work or parts that have not been properly maintained or altered in accordance with Federal Aviation Regulations, manufacturer’s approved data, customer approved data and the policies and procedures contained within this manual. Support the company Safety Program

Requirements

3+ years of aircraft inspection experience Must have active A&P License (2 years minimum) Experience on CRJ 700/900 and Dash 8, is a plus Must have own tools

Miscellaneous

Must report with two forms of employment eligibility identification

About Our Client

Our client hosts maintenance facilities in Calgary, Canada, Great Falls, MT and Jacksonville, FL providing complete maintenance, interiors refurbishment and storage capabilities for regional airlines, manufacturers and aircraft leasing companies.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

153526465740467

Featured job

Aircraft Inspector

Southeast (Mobile, AL)
Posted on 7/17/2024

Responsible for performing preliminary inspections and conducting routine/non-routine buy-back inspections of heavy commercial aircraft during maintenance and/or modifications in an MRO environment.

Essential Duties and Responsibilities

Conduct all required inspections in accordance with the applicable Federal Aviation Regulations, manufacturer’s approved data, any customer’s approved program data, and the policies and procedures contained in this Inspection Procedures Manual. Record the results of all inspections performed on the proper inspection forms used by the repair station in accordance with this Inspection Procedures Manual. Be thoroughly familiar with the applicable Federal Aviation Regulations, specifications, tolerances, limits, inspection methods, techniques, and equipment used in their area of responsibility to determine the quality of the work performed and the airworthiness of the article. Maintain proficiency with various types of inspection aides used for the inspection of a particular item. Ensure current specifications involving inspection tolerances, limits, and procedures recommended by the manufacturer of the product undergoing inspection and other forms of applicable inspection information are available for reference. Other examples of inspection information would be FAA Airworthiness Directives, manufacturer’s bulletins, approved customer data, and Federal Aviation Regulations. Make final airworthiness determination prior to “Return of Service” on items they are authorized to inspect for any article maintained or altered by this repair station. Reject any work or parts that have not been properly maintained or altered in accordance with Federal Aviation Regulations, manufacturer’s approved data, customer approved data and the policies and procedures contained within this manual. Support the company Safety Program

Requirements

5 years heavy maintenance on the following aircraft: B737; B757; B767; A310/A300-600; A320 Family; A330; DC-10; MD10/11 1 year aircraft inspection experience preferred Active A&P License Preferred: GenFam Courses on any of the following type of aircraft: B737; B757; B767; A330/A300-600; A320 Family; A330; DC-10; MD10/11

Miscellaneous

Candidates must report on first day with 2 forms of acceptable identification to verify employment eligibility. Applicants should plan on one week of orientation/training upon arrival APA offers on site representation Food trucks available daily onsite

About Our Client

Our client company is an MRO with special expertise in modifications and engineering services. Having been in business for over 25+ years, our client has redelivered more than 5,000 aircraft to major passenger and freight airlines.  

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

188946572227345

Featured job

QC Inspector A

South Central (Little Rock, AR)
Posted on 7/17/2024

Perform in-process and final inspections of aircraft systems and components to determine the conformity of the aircraft to approved data and airworthiness. Perform installation inspections of components, structures wiring and other aircraft associated items for conformity to engineering and other approved data.

Essential Duties and Responsibilities

“CRITICAL” Perform complete major inspection of aircraft, components, major assemblies, sub- assemblies, production tools or parts during manufacturing, modifications, installation, service, overhaul or flight to determine airworthiness, safety or conformance to approved data and Company standards and requirements. “CRITICAL” Apply technical knowledge in the fields of mechanics, hydraulics, electricity, sheet metal, rigging, instruments, test flights, etc. to determine and sign off safety, airworthiness, or conformance. “CRITICAL” Perform conformity inspection of components, major assemblies, sub-assemblies, or parts during manufacturing, modifications, installations to determine safety or conformance to standards and requirements. “CRITICAL” Interpret and check prints, both hard copy and electronic, engineering change orders and governmental regulatory procedures and specifications. “CRITICAL” Determine extent of work to be performed where no specifications, regulations or written standards are available. “CRITICAL” Use precision measuring guides, gauges and laboratory instruments. Is familiar with FAR Part 145, 135, 91, 65 and 21 and related A/C’s Is familiar with FWW processes. Prepare necessary aircraft related FAA, customer or company documents. Complete and maintain reports and records as required. Accurately enter electronic data related to aircraft production, completion and installation operations. Suggest dispositions of damaged or worn parts and the possibility of salvage based on FAA/EASA regulations, company practices or procedures. Work in a safe manner in accordance with OSHA and company safety procedures. Perform all other duties as assigned as assigned

Requirements

High school diploma or equivalent. A&P License Minimum of 5 years experience in maintenance of aircraft Experience with FAR 145 Repair Station and FAR 43 Maintenance. Able to read and understand structural and avionic drawings, schematics, test procedures, etc. Good verbal and written communication skills to prepare detailed reports. Computer literacy Critical thinking, logic and analytical skills. Pro-active and team orientated. Able to walk up and down steps with or without reasonable accommodation Able to walk long distances, climb, stand, and kneel for extended periods of time with or without reasonable accommodation Pass vision testing, minimum 20/20 corrected, and with no limitations in color perception. Write and speak clearly and intelligently in English Able to access confined areas. Working knowledge of Federal Aviation Regulations’, Type Certificate Data Sheet, Airworthiness Directives’, Advisory Circulars, etc. Able to work in a high noise environment (jet engines, air tools, etc.) with or without reasonable accommodation

Miscellaneous

Associate degree in aerospace field FCC license ISO 9000 familiarization and/or training. Powerplant License. WORKING CONDITIONS: Some travel may be required. Work various shifts. Outside work and work in non-climate controlled areas are required. Involves exposure to chemicals and dust levels set by OSHA standards.

About Our Client

Our partner is a French aerospace company with proven dual expertise as a manufacturer of both military aircraft and business jets. They are a pioneer in the use of CATIA™, the 3D CAD / CAM system that has become a global standard. They are a creator of more than 100 prototypes in the last century, with over 10,000 aircraft delivered to 90 countries.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

148070832028573

Benefits of working with APA Services

Weekly Payroll, Medical Insurance Available, Cash Advances, Travel Pay and/or bonuses on Select Contracts.
We know it takes great people to do great work, so if you're interested in joining the APA Services family, give us a call at:

(817)529-4000

Thanks for taking the time to visit APA Services and we look forward to working with you soon.

Browse All Jobs