Jobs Available

21 - 30 of 39 Matches
Featured job

Sheetmetal Mechanic II (5-10 years)

Southeast (PENSACOLA, FL)
Posted on 9/30/2024

A Sheetmetal Mechanic II is responsible for high proficiency in all minor through major repairs, modifications, E.A.s, and with minimal supervision.

Essential Duties and Responsibilities

Remove and replace various aircraft components with the use of special tooling and ground support equipment following oral and written instructions such as supervisor’s directives and manuals to complete all routine and non-routine assignments in a timely manner. Ability to layout work using bend radius, set back and bend allowance charts, utilization of shop math, install and/or splice spars, landing gear, trunion changes, pressure bulkhead repairs and keal beam repairs/ removal and reinstall. Perform the duties of and provide the necessary training for lower skill levels. Maintain and store tools in a serviceable condition. Adhere to safe maintenance practices and keep a clean work area. Maintain and supply personal records of work performed on OJT forms for the Training Department. Successfully complete any courses deemed necessary by the Training Department. Perform any work that may be assigned by his or her supervisor.

Requirements

5 - 10 years’ experience of heavy structures on commercial aircraft. Passenger to Cargo conversions is a plus Minimum Required Tools (Etched before Arrival). Operating knowledge of shop equipment to include, drill presses, shears, brakes, and band saws. Capable of performing structural repairs on floor beams, fuselage skin repairs, to include stringers, doublers, and triplers. Capable of performing floor beam, and frame installations / repairs. Capable of performing basic repairs, blend outs, and reinforcing repairs. Corrosion removal, damage evaluation, and finish restoration. Ability to read and interpret SRM damage limits, and repairs. Working knowledge of IPCs. Ability to read, interpret, plan and work from complex SRM’s, Blueprints, Service Bulletins, ADs, EAs, and EO’s. Working knowledge of cold working, roto peening, and freeze plug installations a plus.

Miscellaneous

Candidates must report on first day with 2 forms of acceptable identification to verify employment eligibility. Applicants should plan on one week of orientation/training upon arrival APA offers on site representation Food trucks available daily onsite.

About Our Client

Our Client is located at Brookley Aeroplex in Mobile, Alabama, and Pensacola, FL, at the Pensacola International Airport. They are a renowned provider of aircraft maintenance and modification (AMM) services for commercial airlines and air freight operators. They meet their customers' requirements by providing a full spectrum of high-quality, reliable, and timely AMM and engineering solutions. Our client has the know-how and experience to comprehensively manage complex projects, ensuring the customers' aircraft operate safely and efficiently.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

119952515470971

Featured job

Sheetmetal Mechanic

Northeast (Bridgeport, WV)
Posted on 9/30/2024

The Sheetmetal Mechanic will troubleshoot, inspect and perform maintenance on customer aircraft sheet metal components, composites and hydraulics. Perform and document all work performed per appropriate manuals and regulations as required.

Essential Duties and Responsibilities

Adhere to clients General Work Requirements Comply with environmental health / safety policies / procedures, participate in 5-S activities and perform work in a safe and timely manner. Remove / install aircraft components as required Fabricate and or modify structural modifications on aircraft parts Perform minor structural repairs on composite components either attached or detached Assist in conducting hidden damage inspection of aircraft structures Assist with complex structural repairs either on or off aircraft Operate ground support equipment as required Assist with aircraft component repair Perform mechanical / electrical removals and installations as required May assist with maintenance at off-site locations Assist in wing removal as required Assist maintenance as required Inspect confined areas of airframe Assist in designing, modifying and welding metal fixtures as required Assist in providing time estimates as required Fabricate sheet and/or composite components

Requirements

Must have 4+ years of structural sheet metal repair and modification experience or sustained similar experience. Experience on corporate jet aircraft tor commercial aircraft is preferred. CRJ airframe experience is a plus. MRO experience is a plus. Military aircraft maintenance (Depot/Isochronal/Phase Insp) is a plus. FAA A&P OR Airframe license is required. Must have own tools Ability to effectively communicate in English, aircraft maintenance actions, both verbally and in writing. Must be comfortable with 12 hr shift work, days, nights, or weekends.

Miscellaneous

About Our Client

For over 130 years our client innovative and integrated solutions have demonstrated our commitment to creating a positive social impact around the globe. Our range of products and services are tailored to meet our customers’ evolving needs across the commercial aviation, energy, transportation and infrastructure, machinery, defense and space systems sectors. Our culture embraces diversity and cooperation, and we promote a healthy balance of professional and personal development, ensuring that your ideas and expertise are valued and respected.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

980877048286158

Featured job

Sheetmetal Mechanic

South Central (Carrollton, TX)
Posted on 9/27/2024

Seeking 2+ years Experience in a Structures Component Shop environment

Essential Duties and Responsibilities

Accomplish incoming preliminary inspections on aircraft/components in accordance with customer cards or manufacturer’s manuals. Accurately disposition preliminary discrepancies. Complete job assignments in a timely manner. Complete on-the-job-training (OJT) forms and required reading. Help with general clean-up of work area. Responsible for accurately clocking to jobs. Perform other duties as assigned.

Requirements

To perform this job successfully, an individual must be able to perform each essential duties satisfactorily. Applicant must have regular and prompt attendance and be flexible to work a variety of shift schedules and shift hours. The requirements listed below are representative of the knowledge, skill, and/or ability required. Has basic knowledge of aircraft. Dispositions of repairs for components. Ability to read and understand AMM, SRM, SOPM, CMM, AIPC or Engineering data. Communicate effectively with personnel at all levels and keep co-workers and leadership apprised of work progress and difficulties as they arise. Good verbal and written communication skills. (General knowledge of PowerPoint and Word programs) Ability to read and interpret documents as well as communicate effectively with other all personnel at all levels regarding job related issues. Must have knowledge of fundamental maintenance operations and practices. Ability to perform basic and intermediate mathematical functions. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Miscellaneous

Tools are required

About Our Client

Employee turnover rate of less than 1% in our 8 year history. Our mechanics have a combined 150+ years of aviation and composite experience. Reputation with our customers for streamlining repair processes. Lean, six-sigma, kiazen have been applied to realistic segments of our business. Vast and growing capabilities with precise focus on composite technology and industry trends. Interior and Exterior composite products. "A" Class Quality is instilled across the organization. Audited seamless processes and integrity will result in a quality component delivery. Priority on turn time demands by product and customer. Tracking and status parameters ensure the turn time is met for the supply needs.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

100629285455431

Featured job

Sheetmetal Tech Sr

West (Mesa, AZ)
Posted on 9/27/2024

The Sheetmetal Technician Senior works under minimal supervision to safely lay-out, fabricate and install parts equipment and fabricated items on aircraft following established operating procedures. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations. Mentor and train other Sheetmetal Technicians.

Essential Duties and Responsibilities

Essential Functions: Use complicated schematics/blueprints, engineering drawings and technical instructions to safely perform sheetmetal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft. Coordinate with supervision and Inspection to ensure compliance with internal and FAA paperwork, sign-offs and quality specifications. Mentor and train Sheetmetal Technicians, as required. Review their work prior to sign off to ensure work complies with quality control standards. Oversee projects or other technicians and assesses requirements of assigned tasks to procure required materials and documentation for assigned tasks. Use blueprints to cut and form plastics and follow standard operating procedures when using adhesives, sealants and solvents. Utilizing tools as required to shape and form complex angles and configurations according to blueprint specifications or written/verbal information. Safely operate shop equipment such as: brakes, presses, riveting equipment, shears, and hand tools associated with sheetmetal functions. Use the proper hardware for various sheetmetal applications. Comply with all safety, 5S, and housekeeping policies. Uses personal protective equipment as required. Ensures aircraft is protected (PTP). Conduct monthly 5S audits, as required. Use the material tracking system to create parts demand, track squawks and to sign-off work. Assist in developing initiatives to meet individual OGSM requirements, as required. Additional Functions: Work closely with lead to develop and implement process improvements that increase safety, reduce cost, cycle time, and man hours. Participate in continuous improvement activities (e.g. YIAW, Kaizen events, etc.) Coordinate with other disciplines concerning projects. Perform Lead responsibilities, as required. Perform other duties as assigned.

Requirements

High School Diploma or GED required. Four (4) years of sheetmetal and/or fabrication experience. Experience in aerospace industry preferred. Valid Driver’s License required. Other Requirements: Advanced knowledge of sheetmetal or fabrication processes (forming, drilling, stamping, shaping, bending, punching, cutting, riveting, filing and dimpling). Ability to read and interpret blueprints and engineering documentation. Valid drivers license required to operate towing and other Gulfstream transportation equipment. Ability to read, write, speak, and understand proficiently the English language. Demonstrates excellent communication skills, both verbal and written. Adapts to sudden schedule changes. Able to use tools and equipment associated with sheetmetal work. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. Must have a good working knowledge of computers and experience working with Microsoft Office suite. Must be able to read, write, speak, and understand the English language.

Miscellaneous

About Our Client

Our client has led the evolution of business and personal aviation since the 1958 debut of the world’s first purpose-built business aircraft. Today, they produce the world’s most advanced business aircraft, with innovations from nose to tail and wingtip to wingtip, all while offering unmatched global product support and service.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

825388984646897

Featured job

Heavy Structures Mechanic

West (Everett, WA)
Posted on 9/27/2024

Perform heavy sheet metal tasks such as removing, repairing or replacing skins, floor beams, longerons, bulkheads, stringers, frames, chords and any other primary structural parts from commercial aircraft. Works under minimal supervision.

Essential Duties and Responsibilities

Locate and mark dimensions, layout patterns, and templates, fabricate parts, repair or replace heavy structure aircraft components. Read and interpret manufacturer and airline maintenance manuals, service bulletins, engineering authorizations, structural repair manuals, drawings and other specifications to determine feasibility and method of repair, replacement or modification Provide accurate documentation on customer paperwork per FAA requirements. Communicate effectively with other maintenance personnel at all levels by keeping co-workers and leadership apprised of work progress and difficulties as they arise. Follow safety program including hazmat tool control and foreign object damage (FOD) Conduct operational tests. Help with general clean-up of work area. Maintain regular and prompt attendance Perform other duties as assigned.

Requirements

Must have at least four years of practical experience in the procedures, practices, inspection methods, materials, tools, machine tools, and equipment generally used in aircraft heavy structure maintenance. - Airframe and/or Powerplant License preferred Good verbal and written communication skills. Ability to read and interpret documents as well as communicate effectively with other maintenance and support personnel at all levels regarding job related issues. Ability to use precision tools, hand tools, power tools, shrinkers, benders, rollers, drills, shot rivets, saw, brakes, shears and grinders. Familiar with all types of metal, hardware, rivets according to size and measurement to select proper materials for repair. - Must have knowledge of fundamental aircraft maintenance operations and practices and be able to complete tasks with minimal supervision. Ability to perform basic and intermediate mathematical functions. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Meet all regulatory requirements per FAR 65. Proficiency in heavy structure maintenance

Miscellaneous

EDUCATION AND/OR EXPERIENCE: - High School Diploma or equivalent.

About Our Client

Headquartered in Everett, Washington, with additional operations in Moses Lake, Washington; Kansas City, Missouri; and Fort Worth, Texas. This national MRO network provides seamless support for military, commercial and regional aircraft operators – including airframe maintenance, component repair, engineering support, fuselage painting, and business jet services.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

194933835868861

Featured job

Structural Mech I

Southeast (Savannah, GA)
Posted on 9/27/2024

In a team oriented work environment, under moderate supervision, performs a variety of structural assembly operations in a production department.

Essential Duties and Responsibilities

Essential Functions: Perform assembly and fitting of detail parts and structures and varied drilling and riveting operations; ensures parts/assembly meet requirements. Rivet structural assemblies and parts using all tools required to do the job (e.g. portable riveting guns, pneumatic guns, pneumatic drills, counter sinks, rivet shavers, files, reamers, rivets). Read work orders, blueprints, lofts, sketches, and operation sheets to determine sequence of operations, type size and hole pattern for rivets. Check all work and ensure a defective free assembly prior to final inspection. Maintain and use all logs and records (e.g. MIR sheets, DMTs, Crabs, PCOs). Align and assemble parts to be riveted using jigs, holding fixtures, pins, clamps, and fasteners. Maintain a neat and orderly work area, supports the company 5S Program and complies with all safety regulations. Work under moderate supervision on duties and tasks. Support Lean Activities. Perform other duties as assigned.

Requirements

High School Diploma or GED required. 1 year related structural assembly experience. Experience working with Solumina and Smarteam preferred. One year experience credit considered for graduates of Savannah Tech Aircraft Structures Technical Certificate Program. Other Requirements: Ability to read and interpret basic blueprints. Read and interpret 6" scale. Basic computer skills. Must be able to read a scale and perform basic shop math. Read and comprehend basic documents and instructions. Must have essential personal skills, which include an aptitude for hands-on craftwork, a professional attitude, attention to detail, ability to work with people and to meet demanding schedules. Must demonstrate good housekeeping and safety practices. Ability to work with composite resins and materials. Must be able to lift 50 lbs. Must be able to work any shift. Must be able to climb ladders/stands/stairs and work in small spaces and/or restricted areas.

Miscellaneous

About Our Client

Our client has led the evolution of business and personal aviation since the 1958 debut of the world’s first purpose-built business aircraft. Today, they produce the world’s most advanced business aircraft, with innovations from nose to tail and wingtip to wingtip, all while offering unmatched global product support and service.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

111610856923979

Featured job

Structures Mechanic (Completions)

Midwest (Indianapolis, IN)
Posted on 9/27/2024

Fabricate, install, assemble, and repair both internal and external aircraft structures and surfaces on VIP aircraft.

Essential Duties and Responsibilities

Read, interpret, and understand blueprints and other documents to accurately determine the work steps to be performed including correctly sizing and drilling holes for riveting. Rivet sheet metal and components parts utilizing properly tagged and identified tools. Aligns and assembles parts to be riveted using jigs, holding fixtures, pins, clamps, and fasteners. Observes company rules and regulations including housekeeping, proper use of safety methods, and the safe operation of equipment. Ensure regulatory documentation is complied with and completed in a timely fashion in accordance with the client RSQM and other quality standards. Complete all sign offs and component removal/installation sheets at time task is performed. Utilize all resources available to accurately perform the work steps in a safe and timely manner. Other duties as assigned not specifically stated herein.

Requirements

6+ years of structures install experience preferably in the corporate aviation completion environment. High school diploma or GED. Relevant trade school attendance is a plus. Ability to read, write, speak, and understand the English language. Ability to read and interpret blueprints and engineering documentation. Strong ability to provide verbal and written communication. With guidance, able to read, interpret and understand blueprints. Must be self starting and motivated with the desire to learn Ability to apply the use of routine to complex mathematical problems to solve work issues. Ability to comprehend and retain OJT. Must possess a proficient mechanical aptitude. Ability to read measuring devices such as a scale or caliper or other required tools. Ability to use basic shop equipment (drill press, band saw, sander, etc). Ability to use basic hand tools (grinder, drill motor, wrenches, etc).

Miscellaneous

The work environment described here is representative of those required by an employee to perform the essential functions of this job with or without reasonable accommodations. The location where this position works is in the back shop of an aircraft hangar environment which could be subject to weather changes and is subject to constant exposure to loud noise, potential contact with hazardous waste material, heavy machinery and other safety hazards such as cabinets, etc. PHYSICAL DEMANDS: The physical demands described here is representative of those required by an employee to perform the essential functions of this job with or without reasonable accommodations.

About Our Client

Our Client is continuously innovating in the large to very large business jet aircraft segment engineering luxury into our cabin completions, upgrades and refurbishments. Located in Indianapolis, Indiana our client has established itself as one of the most unique and modern completion & service centers in the world exclusively for Airbus Corporate Jets, Boeing Business Jets, Bombardier Business aircraft and Sukhoi Business Jets.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

143267215293177

Featured job

Structural Mech II

Southeast (Savannah, GA)
Posted on 9/27/2024

In a team oriented work environment, under minimal supervision, performs a variety of structural assembly operations in a production department.

Essential Duties and Responsibilities

Essential Functions: Perform assembly and fitting of detail parts and structures and varied drilling and riveting operations; ensures parts/assembly meet requirements. Rivet structural assemblies and parts using all tools required. to do the job (e.g. portable riveting guns, pneumatic guns, pneumatic drills, counter sinks, rivet shavers, files, reamers, rivets). Must display the ability to remove fasteners without damaging structure. Read work orders, blueprints, lofts, sketches and operation sheets to determine sequence of operations, type size and hole pattern for rivets. Check all work and ensure a defective free assembly prior to final inspection. Maintain and use all logs and records (e.g. MIR sheets, DMTs, Crabs, PCOs). Align and assemble parts to be riveted using jigs, holding fixtures, pins, clamps, and fasteners. Make repairs per Discrepant Material Tags (DMT), Material Review Request (MRR), Production Change Orders (PCO), performs necessary rework to ensure installations meet conformity. . Maintain a neat and orderly work area, supports the company 5S Program, and complies with all safety regulations. Able to work with minimal supervision on duties and tasks. Support Lean Activities.

Requirements

High School Diploma or GED required. 2 years related structural assembly experience. Experience working with Solumina and Smarteam preferred.. Other Requirements: Must be able to read and interpret blue prints. Must be skilled in close tolerance work and have knowledge of use of special tools and equipment. Must be able to use mathematical formulas by solving dimensional problems using fractions, decimal fractions and whole numbers. Basic computer skills. Must be able to read a scale and perform basic shop math. Read and comprehend basic documents and instructions. Must have essential personal skills, which include an aptitude for hands-on craftwork, a professional attitude, attention to detail, ability to work with people and to meet demanding schedules. Must demonstrate good housekeeping and safety practices. Ability to work with composite resins and materials. Must be able to lift 50 lbs. Must be able to work any shift. Must be able to climb ladders/stands/stairs and work in small spaces and/or restricted areas.

Miscellaneous

Unique Skills:Must have experience troubleshooting avionics/electrical aircraft discrepancies and experience with aircraft servicing/troubleshooting equipment

About Our Client

Our client has led the evolution of business and personal aviation since the 1958 debut of the world’s first purpose-built business aircraft. Today, they produce the world’s most advanced business aircraft, with innovations from nose to tail and wingtip to wingtip, all while offering unmatched global product support and service.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

697870158127754

Featured job

Sheetmetal Mechanic

South Central (Ardmore, OK)
Posted on 9/27/2024

The Sheet Metal Mechanic is responsible for high proficiency in all minor through major repairs, modifications, E.A.s, and with minimal supervision.

Essential Duties and Responsibilities

Remove and replace various aircraft components with the use of special tooling and ground support equipment following oral and written instructions such as supervisor’s directives and manuals to complete all routine and non-routine assignments in a timely manner. Proficient detail blueprint reading, ability to read, interpret and work from service bulletins, engineering work orders, major S.R.M. structural repairs. Ability to layout work using bend radius, set back and bend allowance charts, utilization of shop math, install and/or splice spars, landing gear, trunion changes, pressure bulkhead repairs and keal beam repairs/ removal and reinstall. Knowledge of ATA codes, knowledge of all applicable F.A.R.’s and company policies and procedures including job card/ time card, routine/ non-routine cards, S.R.M.’s, service bulletins, E.O.’s, and work sign-off/ sell-off procedures. Perform the duties of and provide the necessary training for lower skill levels. Maintain and store tools in a serviceable condition. Adhere to safe maintenance practices and keep a clean work area. Maintain and supply personal records of work performed on OJT forms for the Training Department. Successfully complete any courses deemed necessary by the Training Department. Perform any work that may be assigned by his or her supervisor.

Requirements

3-5 years' sheetmetal experience Must have experience on 737 and/or Dash 8 aircraft Must have minimum required tools. Tool box must be etched shadowed prior to start High school diploma or equivalent

Miscellaneous

Tools shall be identified with a number unique to the owner. Multiple items too small to identify (apexs, drill bits, etc.) will be placed in a container. The quantity of items, to include the container itself, shall be readable on the outside of the container. Each item shall be listed on a “Master Tool Box” inventory. A copy shall be on file in QA and one copy in the owner’s tool box. Facial Hair (Men) – Beards and mustaches, if worn, will be neatly trimmed to an approximate ¼” maximum. Short, evenly trimmed sideburns are allowed. Hair Overall (All) - Will not be worn in an extreme or fad style. Men’s hair will not extend below the bottom of the standard shirt collar. Tattoos (All) – Visible tattoos are allowed on arms and legs if they are not discriminatory based on racial, sexual, religious, ethnic, or other characteristics or attributes of a sensitive nature. These include the prohibition of any tattoos commonly associated with gangs, extremists and/or supremacist organizations or discrimination. Tattoos, brandings or body marks on the head, neck, face, tongue, lips, and/or scalp are prohibited. Hand tattoos are limited to one single-band ring tattoo, on one finger, on one hand. Shoes – When working in safety and/or industrial flight line environment, shoes must follow OSHA guidelines. Can wear tennis shoes (Black is preferred) Site Specific Uniforms – (All) – Standardized dress at our hangar locations include site specific color uniform pants (responsibility of the employee to provide), blue or white shirts. NO shorts or blue jeans. Can wear Dickies or Cargo pants (BLACK OR NAVY BLUE)

About Our Client

For over 20 years, our client has been providing outstanding aviation services on a global basis to operators of large corporate and V VIP aircraft.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

154804914455843

Featured job

Structural Mech III

Southeast (Savannah, GA)
Posted on 9/27/2024

In a team oriented work environment, under minimal supervision, performs a variety of structural assembly operations in a production department.

Essential Duties and Responsibilities

Essential Functions: Perform assembly and fitting of detail parts and structures and varied drilling and riveting operations; ensures parts/assembly meet requirements. Rivet structural assemblies and parts using all tools required. to do the job (e.g. portable riveting guns, pneumatic guns, pneumatic drills, counter sinks, rivet shavers, files, reamers, rivets). Must display the ability to remove fasteners without damaging structure. Read work orders, blueprints, lofts, sketches and operation sheets to determine sequence of operations, type size and hole pattern for rivets. Check all work and ensure a defective free assembly prior to final inspection. Maintain and use all logs and records (e.g. MIR sheets, DMTs, Crabs, PCOs). Align and assemble parts to be riveted using jigs, holding fixtures, pins, clamps, and fasteners. Make repairs per Discrepant Material Tags (DMT), Material Review Request (MRR), Production Change Orders (PCO), performs necessary rework to ensure installations meet conformity. . Maintain a neat and orderly work area, supports the company 5S Program, and complies with all safety regulations. Able to work with minimal supervision on duties and tasks. Support Lean Activities.

Requirements

High School Diploma or GED required. 2 years related structural assembly experience. Experience working with Solumina and Smarteam preferred.. Other Requirements: Must be able to read and interpret blue prints. Must be skilled in close tolerance work and have knowledge of use of special tools and equipment. Must be able to use mathematical formulas by solving dimensional problems using fractions, decimal fractions and whole numbers. Basic computer skills. Must be able to read a scale and perform basic shop math. Read and comprehend basic documents and instructions. Must have essential personal skills, which include an aptitude for hands-on craftwork, a professional attitude, attention to detail, ability to work with people and to meet demanding schedules. Must demonstrate good housekeeping and safety practices. Ability to work with composite resins and materials. Must be able to lift 50 lbs. Must be able to work any shift. Must be able to climb ladders/stands/stairs and work in small spaces and/or restricted areas.

Miscellaneous

Unique Skills:Must have experience troubleshooting avionics/electrical aircraft discrepancies and experience with aircraft servicing/troubleshooting equipment

About Our Client

Our client has led the evolution of business and personal aviation since the 1958 debut of the world’s first purpose-built business aircraft. Today, they produce the world’s most advanced business aircraft, with innovations from nose to tail and wingtip to wingtip, all while offering unmatched global product support and service.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

148851932223926

Benefits of working with APA Services

Weekly Payroll, Medical Insurance Available, Cash Advances, Travel Pay and/or bonuses on Select Contracts.
We know it takes great people to do great work, so if you're interested in joining the APA Services family, give us a call at:

(817)529-4000

Thanks for taking the time to visit APA Services and we look forward to working with you soon.

Browse All Jobs