Find the right job for your preferred location and specialty
Jobs Available
1 - 10 of 10 Matches
Under minimal supervision, learn how to use a variety of wood working tools, techniques, and materials to fabricate complex cabinetry and other wood-surfaced subassemblies for completion of VIP aircraft.
Essential Duties and Responsibilities
Fabricate high quality cabinetry, divans, ledges, etc. I.A.W. client approved procedures.
Must be able to interpret material specs and engineering drawings to ensure installed cabinetry meets the design spec, quality standards and customer expectations.
Learn to request material needs from approved data in a timely manner to ensure a continuous workflow.
Must be able to adhere to all regulatory documentation regarding proper sign offs. As well as be able to ensure paperwork is complied with and completed timely in accordance with the client RSQM and other quality standards.
Follow all department safety guidelines and ensure proper usage of tools and equipment.
Basic knowledge of company installation procedures, process specs, IOPs, etc.
Other duties as assigned but not covered herein.
Requirements
High School Diploma, or GED. Relevant trade school attendance is a plus.
Basic knowledge of the Cabinetry build process as it specifically relates to the corporate aviation industry, in a completions environment.
3+ yrs experience aviation cabinetry experience
Ability to read, write, speak, and understand the English language.
Ability to read and interpret blueprints and engineering documentation.
Basic knowledge and willingness to learn all aspects of the Cabinetry build process.
Willingness to obtain knowledge of the RSQM and FAA requirements as it relates to Cabinetry build and Installation.
Working knowledge of computers and related software utilized by client.
Willingness to obtain working knowledge of lean or other continuous improvement opportunity techniques.
Ability to communicate in an assertive yet professional, motivating, and tactful manner.
Miscellaneous
The physical demands described here is representative of those required by an employee to perform the essential functions of this job with or without reasonable accommodations.
About Our Client
Our Client is continuously innovating in the large to very large business jet aircraft segment engineering luxury into our cabin completions, upgrades and refurbishments.
Located in Indianapolis, Indiana our client has established itself as one of the most unique and modern completion & service centers in the world exclusively for Airbus Corporate Jets, Boeing Business Jets, Bombardier Business aircraft and Sukhoi Business Jets.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
177084419260563
Seeking Interior Aircraft Mechanics in Tampa, FL
Essential Duties and Responsibilities
Remove and replace various aircraft components and electrical systems with the use of special tooling and ground support equipment
Follow oral and written instructions such as supervisor’s directives and manuals to complete all routine and non-routine assignments in a timely manner.
Analyze all repairs deciding independent methods and procedures to accomplish assignments.
Requirements
2+ years of recent Interior experience on heavy commercial aircraft preferred but will also accept experience on helicopters, military aircraft, and regional jets.
Must have basic set of tools, must be etched.
Must meet the qualifications to obtain a SIDA badge.
High School diploma or equivalent.
Must be available to work any shift. (3 shifts; our client is a 24/7 facility)
Miscellaneous
MUST be able to pass a 10 year federal background check in order to obtain an airport security badge. Must bring tools.
About Our Client
For more than five decades our clients pedigree has been earned by providing customers worldwide extraordinary maintenance, repair and overhaul (MRO) service and freighter conversions.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
614233458873053
Seeking Interior Mechanics in Everett, WA
Essential Duties and Responsibilities
Work with a team to install, repair and modify interiors for passenger services.
Requirements
Minimum A license
Interiors background working on Boeing 737, 757 and 767. Airbus background a plus.
Experience: Remove/reinstall interior linings, cargo bay liners, floor panels.
Experience: Remove/reinstall lavatories, galleys, seats, windscreens
Experience: Remove/reinstall/adjust doors.
Use of basic hand tools (i.e., sockets, wrenches, ratchets, screw drivers, pliers, etc.)
Miscellaneous
About Our Client
Headquartered in Everett, Washington, with additional operations in Moses Lake, Washington; Kansas City, Missouri; and Fort Worth, Texas. This national MRO network provides seamless support for military, commercial and regional aircraft operators – including airframe maintenance, component repair, engineering support, fuselage painting, and business jet services.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
637638096305295
Seeking Interior Mechanics in Everett, WA
Essential Duties and Responsibilities
Work with a team to install, repair and modify interiors for passenger services.
Requirements
Interiors background working on Boeing 737, 757 and 767. Airbus background a plus.
Experience: Remove/reinstall interior linings, cargo bay liners, floor panels.
Experience: Remove/reinstall lavatories, galleys, seats, windscreens
Experience: Remove/reinstall/adjust doors.
Use of basic hand tools (i.e., sockets, wrenches, ratchets, screw drivers, pliers, etc.)
Miscellaneous
About Our Client
Headquartered in Everett, Washington, with additional operations in Moses Lake, Washington; Kansas City, Missouri; and Fort Worth, Texas. This national MRO network provides seamless support for military, commercial and regional aircraft operators – including airframe maintenance, component repair, engineering support, fuselage painting, and business jet services.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
188191900661994
The Interior Mechanic will be responsible for maintenance and repair of the interior on Commercial Aircraft types.
Essential Duties and Responsibilities
Remove and replace various aircraft components and electrical systems with the use of special tooling and ground support equipment following oral and written instructions such as supervisor’s directives and manuals to complete all routine and non-routine assignments in a timely manner.
Analyze all repairs deciding independent methods and procedures to accomplish assignments.
Research and order aircraft interior and shop parts coordinating activities with purchasing department.
Requirements
1+ years of recent Interior experience
Must have minimum required tools.
Prior experience on Boeing 727/737/747/757/767/777, Airbus 319/320/330 or CRJ/ERJ aircraft
High school diploma or general education degree (GED) required.
Miscellaneous
Candidates must report on first day with 2 forms of acceptable identification to verify employment eligibility. Applicants should plan on one week of orientation/training upon arrival APA offers on site representation Food trucks available daily onsite
About Our Client
Our Client is located at Brookley Aeroplex in Mobile, Alabama, and Pensacola, FL, at the Pensacola International Airport. They are a renowned provider of aircraft maintenance and modification (AMM) services for commercial airlines and air freight operators. They meet their customers' requirements by providing a full spectrum of high-quality, reliable, and timely AMM and engineering solutions. Our client has the know-how and experience to comprehensively manage complex projects, ensuring the customers' aircraft operate safely and efficiently.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
132170198849524
As an Interior Mechanic, you'll play a vital role in fabricating, installing, and refurbishing aircraft interior components to meet customer specifications and quality standards. Your work ensures the highest level of comfort and aesthetics for corporate aircraft interiors.
Essential Duties and Responsibilities
Fabricate, install and refurbish aircraft interior equipment and furnishings per work order or customer request
Perform and document all work performed per appropriate manuals and regulations as required
Adhere to Bombardier General Work Requirements (Factory, Shop and / or Hanger positions)
Comply with environmental health / safety policies / procedures
Participate in 5-S activities
Assist with additional work on drop-ins and planned maintenance within the facility during slow periods of unplanned work as needed
Clean aircraft as required
Travel on international assignments if required
Assist with maintenance at off-site locations as needed
Assist with other maintenance disciplines as needed
Requirements
You typically have 6+ years of Interiors Remove & Install experience on corporate aircraft
You demonstrate the ability to break down cabinets remove hardware, inlay etc.
You demonstrate ability to strip finish utilizing heat and scraper
You have experience with sanding and prepping raw veneer and hardwood for finish, including touching up defects in veneer
You can mix match and apply stains and paints on new veneers
You have knowledge on spraying polyester base coats and urethane top coats
You have experience with Aircraft touch up
You demonstrate the ability to mask and unmask components for finish process
You demonstrate mechanical aptitude
You demonstrate the ability to interpret and work with mechanical engineering drawings
You demonstrate the ability to communicate in both written and verbal form on individual and / or aircraft status
You have Basic PC skills
Miscellaneous
About Our Client
Our client is a global leader in aviation, committed to creating cutting-edge aircraft that set the standard for performance, reliability, and innovation. With headquarters in Montreal, Canada, they operate globally, including in the U.S., where they maintain a significant presence. At the Hartford Service Center, the mission is to deliver top-tier maintenance and support for their fleet, ensuring each aircraft operates at peak performance. With a commitment to excellence and a focus on innovation, our client provides unmatched career opportunities for those passionate about aviation.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
177722006173228
As an Interior Mechanic, you'll play a vital role in fabricating, installing, and refurbishing aircraft interior components to meet customer specifications and quality standards. Your work ensures the highest level of comfort and aesthetics for corporate aircraft interiors.
Essential Duties and Responsibilities
Fabricate, install and refurbish aircraft interior equipment and furnishings per work order or customer request
Perform and document all work performed per appropriate manuals and regulations as required
Adhere to Bombardier General Work Requirements (Factory, Shop and / or Hanger positions)
Comply with environmental health / safety policies / procedures
Participate in 5-S activities
Assist with additional work on drop-ins and planned maintenance within the facility during slow periods of unplanned work as needed
Clean aircraft as required
Travel on international assignments if required
Assist with maintenance at off-site locations as needed
Assist with other maintenance disciplines as needed
Requirements
You typically have 2-4 years of Interiors Remove & Install experience on corporate aircraft
You demonstrate the ability to break down cabinets remove hardware, inlay etc.
You demonstrate ability to strip finish utilizing heat and scraper
You have experience with sanding and prepping raw veneer and hardwood for finish, including touching up defects in veneer
You can mix match and apply stains and paints on new veneers
You have knowledge on spraying polyester base coats and urethane top coats
You have experience with Aircraft touch up
You demonstrate the ability to mask and unmask components for finish process
You demonstrate mechanical aptitude
You demonstrate the ability to interpret and work with mechanical engineering drawings
You demonstrate the ability to communicate in both written and verbal form on individual and / or aircraft status
You have Basic PC skills
Miscellaneous
About Our Client
Our client is a global leader in aviation, committed to creating cutting-edge aircraft that set the standard for performance, reliability, and innovation. With headquarters in Montreal, Canada, they operate globally, including in the U.S., where they maintain a significant presence. At the Hartford Service Center, the mission is to deliver top-tier maintenance and support for their fleet, ensuring each aircraft operates at peak performance. With a commitment to excellence and a focus on innovation, our client provides unmatched career opportunities for those passionate about aviation.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
192311234745033
As an Interior Mechanic, you'll play a vital role in fabricating, installing, and refurbishing aircraft interior components to meet customer specifications and quality standards. Your work ensures the highest level of comfort and aesthetics for corporate aircraft interiors.
Essential Duties and Responsibilities
Fabricate, install and refurbish aircraft interior equipment and furnishings per work order or customer request
Perform and document all work performed per appropriate manuals and regulations as required
Adhere to Bombardier General Work Requirements (Factory, Shop and / or Hanger positions)
Comply with environmental health / safety policies / procedures
Participate in 5-S activities
Assist with additional work on drop-ins and planned maintenance within the facility during slow periods of unplanned work as needed
Clean aircraft as required
Travel on international assignments if required
Assist with maintenance at off-site locations as needed
Assist with other maintenance disciplines as needed
Requirements
You typically have 4-6 years of Interiors Remove & Install experience on corporate aircraft
You demonstrate the ability to break down cabinets remove hardware, inlay etc.
You demonstrate ability to strip finish utilizing heat and scraper
You have experience with sanding and prepping raw veneer and hardwood for finish, including touching up defects in veneer
You can mix match and apply stains and paints on new veneers
You have knowledge on spraying polyester base coats and urethane top coats
You have experience with Aircraft touch up
You demonstrate the ability to mask and unmask components for finish process
You demonstrate mechanical aptitude
You demonstrate the ability to interpret and work with mechanical engineering drawings
You demonstrate the ability to communicate in both written and verbal form on individual and / or aircraft status
You have Basic PC skills
Miscellaneous
About Our Client
Our client is a global leader in aviation, committed to creating cutting-edge aircraft that set the standard for performance, reliability, and innovation. With headquarters in Montreal, Canada, they operate globally, including in the U.S., where they maintain a significant presence. At the Hartford Service Center, the mission is to deliver top-tier maintenance and support for their fleet, ensuring each aircraft operates at peak performance. With a commitment to excellence and a focus on innovation, our client provides unmatched career opportunities for those passionate about aviation.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
646493561044042
Under minimal supervision, learn how to use a variety of finish application tools, techniques, and materials for all finished surfaces for completion of VIP aircraft.
Essential Duties and Responsibilities
Finish all surfaces by means of paint, polish, etc. I.A.W. client approved procedures.
Must be able to interpret material specs and engineering drawings to ensure all finished parts meet the design spec, quality standards and customer expectations.
Learn to request material needs from approved data in a timely manner to ensure a continuous workflow.
Must be able to adhere to all regulatory documentation regarding proper sign offs. As well as be able to ensure paperwork is complied with and completed timely in accordance with the client RSQM and other quality standards.
Follow all department safety guidelines and ensure proper usage of tools and equipment.
Basic knowledge of company installation procedures, process specs, IOPs, etc.
Other duties as assigned but not covered herein.
Requirements
3+ years Interior Install experience, preferably in the corporate aviation completion environment.
High School Diploma, or GED. Relevant trade school attendance is a plus.
Basic knowledge of the sheet metal fabrication processes as it specifically relates to the corporate aviation industry, in a completions environment.
Ability to read, write, speak, and understand the English language.
Ability to read and interpret blueprints and engineering documentation.
Basic knowledge and willingness to learn all aspects of the finish application process.
Willingness to obtain knowledge of the RSQM and FAA requirements as it relates to finish application.
Working knowledge of computers and related software utilized by client.
Willingness to obtain working knowledge of lean or other continuous improvement opportunity techniques.
Ability to communicate in an assertive yet professional, motivating, and tactful manner.
Miscellaneous
The work environment described here is representative of those required by an employee to perform the essential functions of this job with or without reasonable accommodations.
The location where this position works is in the back shop of an aircraft hangar environment which could be subject to weather changes and is subject to constant exposure to loud noise, potential contact with hazardous waste material, heavy machinery and other safety hazards such as cabinets, etc.
PHYSICAL DEMANDS:
The physical demands described here is representative of those required by an employee to perform the essential functions of this job with or without reasonable accommodations.
About Our Client
Our Client is continuously innovating in the large to very large business jet aircraft segment engineering luxury into our cabin completions, upgrades and refurbishments.
Located in Indianapolis, Indiana our client has established itself as one of the most unique and modern completion & service centers in the world exclusively for Airbus Corporate Jets, Boeing Business Jets, Bombardier Business aircraft and Sukhoi Business Jets.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
103695285442967
Works with the finish coating process for aircraft cabinets and performs other functions that support the delivery or aircraft cabinets using personal skills in conformance with procedures and guidelines and to the standards of the Dassault Falcon Jet quality.
Essential Duties and Responsibilities
Maintain a clean and organized work area.
Work from drawings, sketches, pictures or verbal specifications to stain, finish, and polish cabinets, cabinet parts, and sub-assemblies including inlays, patterns, and special designs.
Strip finish as needed.
Experience working with wood veneers, sanding, clear coating, staining, and touch up on veneers.
Prepare surfaces to be painted by sanding, steaming, filling, and cleaning.
Cover all areas to be protected from paint or stripper with proper materials.
Select and mix proper paint to the Manufacturer’s specifications. May be required to experiment with special paints and related products.
Set up and use spray gun for proper application of urethane, lacquer, enamel, water base and epoxy paints.
Touch up woodwork with brush, airbrush, and/or spray gun, blend-in techniques.
Complete tasks within assigned time limits.
Accurately log computerized labor data collection system for work orders, time and attendance tracking.
May lead or train other personnel on specific job assignments as directed by supervision.
Work in a safe manner in accordance with OSHA and company safety procedures.
Set up and operate standard shop equipment.
Requirements
High school diploma or equivalent
1 year of experience preparing, sanding or stripping metal or composite surfaces for the application of primer; or polishing, buffing and/or touch up/artistic background; or specialized technical school certification in related field
Able to work from documentation such as company procedures, preparation packages, etc.
Able to work in confined spaces.
Must be able to lift and carry 50 pounds with or without reasonable accommodation
Must have visual capacity and muscular dexterity to work on fine detail, high cost products with a minimum of errors or rework.
Able to use standard spray paint equipment: paint guns, sanding equipment, dual action orbital sander and common hand tools.
Must not be abnormally allergic to paint, paint stripper, solvents, primers or other paint related products that produce fumes or dust while using.
Ability to use a respirator.
If working in Interiors, must be able to repeatedly enter and exit aircraft using stationary steps/stairs
Preferred - Aircraft cabinetry finish experience.
Preferred - Able to solve practical problems when needed.
Preferred - Able to interpret a variety of instructions furnished in written, oral, or diagram form.
Preferred - Familiar with Lean Manufacturing principles.
Miscellaneous
WORKING CONDITIONS: Typical factory environment. May work in areas with high noise levels and limited climate control. Works with company’s approved finish chemicals and exposed to sanding dust. May work in hangar and ramp environments with variable temperature range.
About Our Client
Our partner is a French aerospace company with proven dual expertise as a manufacturer of both military aircraft and business jets. They are a pioneer in the use of CATIA™, the 3D CAD / CAM system that has become a global standard. They are a creator of more than 100 prototypes in the last century, with over 10,000 aircraft delivered to 90 countries.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
644358178962527
