Find the right job for your preferred location and specialty
Jobs Available
31 - 40 of 55 Matches
The A & P Aircraft Mechanic repairs, maintains, and services District aircraft in compliance with the directives and standards of the Federal Aviation Administration and policies and procedures as set forth by the District Board of Commissioners and administered by the Executive Director.
Essential Duties and Responsibilities
Check and determine the need and extent of repair and maintenance to be made to District aircraft so that aircraft stays in proper working order.
Perform pre and post flight inspections and maintain District owned aircraft under the periodic inspection program specified by the FAA for charter aircraft in order to provide a reasonable assurance that aircraft are functioning properly.
Fuel aircraft and load with chemicals as required so that aircraft have enough fuel and chemicals for each mission.
Perform equipment calibration prior to missions to ensure proper amounts of chemicals are released from aircraft.
Perform inspections and repairs in order to submit any FAA required documents to the Director of Aircraft Maintenance.
Maintain and rebuild aircraft engines and airframe as needed with an objective of all aircraft being mission ready.
Assist in the design and fabrication or modification of special equipment such as liquid and dry application equipment resulting in fully functioning equipment to assist in the abatement of mosquito populations.
Prepare requisitions and work orders under the direction of the Director of Aircraft Maintenance for parts and materials needed to maintain District aircraft in a state of readiness.
Perform routine maintenance and repair to facilities in order to keep the building in good working order.
Operate forklifts and other ground support equipment as needed to help complete tasks.
Assist ground operations when needed with maintenance, repair, and operation of vehicles and spray equipment as necessary in order to have functioning ground equipment.
Reinforce aircraft operation sites when aircraft operations exceed the capacity of the Aircraft Support Technicians in the field.
Follow Federal and State laws and District policies regarding health and safety to ensure compliance.
Since our organization is going to change to meet the needs of public health, environmental conservation, and the District, you can expect, anticipate, and assume that your job description will change to meet these challenges.
Requirements
Knowledge:
Knowledge of FAA rules and regulations governing configuration, restrictions, and modification of aircraft used for aerial pesticide application
Knowledge of the principles and techniques of aircraft maintenance
Knowledge of general maintenance, repair, and servicing techniques
Abilities & Skills:
Ability to operate machinery, vehicles, and material handling equipment
Ability to receive instructions and to perform tasks assigned in a safe and efficient manner
Education, Training, & Experience:
Completed high school education or equivalent trade school education
Five years experience in aircraft maintenance
Must have an Airframe and Power plant License
Must be licensed in “Public Health Pest Control” from the Department of Agriculture and Consumer Services or able to obtain such certification within one year
Must hold a valid Florida CDL License or receive it within 1 year of hire date.
Must hold a valid forklift certificate in accordance with OSHA: 29 CFR 1910.178
Miscellaneous
The A & P Aircraft Mechanic will be exposed to both inside and outside environmental conditions, noise, vibration, close proximity to moving mechanical parts, working in high places, small confined spaces, exposure to chemicals, fumes, odors and or oils and may be required to wear a respirator and other protective equipment as required. The A & P Aircraft Mechanic will be expected to perform very heavy work (frequently exerting in excess of 50 lbs of force to lift, carry, push, pull, twist, reach, or otherwise move objects) below, above the waist and shoulders.
About Our Client
Our client is the official mosquito control provider for the Florida Keys which is located at the southern tip of the Florida penisula in Monroe County, FL.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
137178370796273
Seeking experienced A&P Mechanics to perform aircraft maintenance, inspections, troubleshooting, repairs, and modifications in a maintenance, repair, and overhaul (MRO) environment. This position supports a variety of aircraft platforms and offers the opportunity to work alongside a highly skilled maintenance team while ensuring all work is completed in accordance with FAA regulations, manufacturer specifications, and company quality standards.
Essential Duties and Responsibilities
Perform scheduled and unscheduled maintenance on aircraft and aircraft systems.
Troubleshoot and repair airframe, engine, electrical, hydraulic, pneumatic, and mechanical systems.
Conduct inspections in accordance with FAA regulations and company procedures.
Read and interpret maintenance manuals, wiring diagrams, engineering drawings, and technical data.
Complete accurate maintenance records and required documentation.
Remove, install, test, and adjust aircraft components and systems.
Perform operational and functional checks following maintenance activities.
Maintain a safe, clean, and organized work environment.
Follow all company safety, quality, and regulatory requirements.
Assist with aircraft modifications, repairs, and return-to-service activities as assigned.
Requirements
Minimum Qualifications
FAA Airframe & Powerplant (A&P) License required.
Minimum 5 years of hands-on aircraft maintenance experience OR 3 years of corporate/business aviation maintenance experience.
Experience performing inspections, troubleshooting, repairs, and maintenance on aircraft systems.
Ability to read and interpret maintenance manuals, engineering drawings, wiring diagrams, and technical data.
Strong troubleshooting and diagnostic skills.
Must have own tools required to perform assigned duties.
Ability to work overtime, weekends, and flexible schedules as needed.
Preferred Qualifications
Previous MRO, service center, corporate aviation, military, or commercial aircraft maintenance experience.
Experience with major inspections, modifications, and return-to-service activities.
Familiarity with FAA regulations, maintenance record keeping, and quality standards.
Experience working independently with minimal supervision.
Miscellaneous
About Our Client
Our client is a leading provider of aircraft maintenance, repair, and overhaul (MRO) services, supporting a wide range of business aviation and special mission aircraft. With a strong reputation for quality workmanship, technical expertise, and customer service, they deliver comprehensive maintenance, inspection, modification, and avionics solutions from state-of-the-art facilities across the United States.
Committed to safety, reliability, and operational excellence, our client invests in both advanced technology and skilled aviation professionals to ensure every aircraft is maintained to the highest standards. Their team-oriented culture provides employees with opportunities for career growth, ongoing training, and exposure to diverse aircraft platforms within a fast-paced aviation environment.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
790417669633529
Join the team as an A&P Mechanic in Wichita, KS, where you’ll contribute to world-class aircraft maintenance. In this role, you’ll play an essential part in inspecting, troubleshooting, and repairing Bombardier aircraft, ensuring they meet top safety and quality standards. If you are a motivated professional with a passion for aviation and technical precision, this is a prime opportunity to grow your skills and career with one of the most respected names in the industry.
Essential Duties and Responsibilities
Perform Scheduled and Unscheduled Maintenance: Conduct inspections, tests, and repairs on aircraft to ensure optimal functionality and safety.
Troubleshoot and Diagnose Mechanical Issues: Efficiently locate and correct any mechanical problems in accordance with company and FAA standards.
Documentation and Compliance: Accurately document all maintenance actions and ensure compliance with Bombardier and FAA regulations.
Collaborate with Team Members: Work closely with other mechanics, inspectors, and engineers to troubleshoot and resolve technical issues.
Utilize Technical Manuals and Schematics: Rely on detailed manuals and schematics to execute precise repairs and modifications.
Requirements
You have a valid and current FAA Airframe & Powerplant (A&P) license. Willing to accept only an Airframe for the right candidate.
You have a minimum of 5+ years’ corporate aircraft experience.
You have the ability to interpret and work with mechanical engineering drawings.
You have the ability to effectively communicate in English both written and verbal form on individual and / or aircraft status.
You own a basic set of hand tools with the ability to demonstrate inventory & control of tools.
You must obtain appropriate Ground Support Equipment Qualifications, as required.
You have the ability to work unscheduled overtime including nonscheduled workdays and holidays.
You have basic PC skills.
You have the ability to obtain a Security Identification Display Area badge (SIDA) (If applicable).
Miscellaneous
About Our Client
Our client is a global leader in aviation, committed to creating cutting-edge aircraft that set the standard for performance, reliability, and innovation. With headquarters in Montreal, Canada, they operate globally, including in the U.S., where they maintain a significant presence. The Wichita, KS, facility is dedicated to producing and maintaining some of the most advanced aircraft in the world, delivering unparalleled quality and service to their clients.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
701019982772523
APA Services is seeking to hire several Sheetmetal Mechanics for a long term opportunity in Smyrna, TN
Essential Duties and Responsibilities
Advanced knowledge of Sheet-Metal fabrication, Sheet-Metal Installation, Sheet-metal Lay-out, Sheet-metal part fabrication
Forming complex angles and configurations, Sheet-metal Forming, drilling, stamping, shaping, bending, punching
Sheet-metal cutting, riveting, filing and dimpling, Install Sheet-metal parts, install fabricated items on aircraft
Read Engineering specifications, Read Blueprints
Requirements
3+ years’ experience
All candidates must have 1 year experience on corporate aircraft.
Applicants should bring all trade specific hand tools to this assignment
Solid work history required (This is a long term assignment. Applicant’s with short stents of employment over the previous 2 years will not be considered)
High School Diploma or GED
Miscellaneous
Tool box MUST be shadowed and tools ETCHED. Candidates must report on day 1 with acceptable US Persons documentation per U.S. Export Control Compliance requirements.
About Our Client
Since 1950, our partner has set the standard for excellence in business aircraft sales, service and management. Its rich history began in Greenville, SC and has expanded to additional locations in Nashville, TN & Dayton, OH.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
100946162715602
We are seeking experienced A&P Mechanics for a premier corporate aviation maintenance operation in Bay City, WI. These openings support business jet maintenance, inspections, troubleshooting, and return-to-service activities in a high-standard Part 145 environment. Candidates must have strong corporate aircraft maintenance experience and be comfortable working in a fast-paced, quality-driven operation with high expectations for professionalism and technical ability.
This client is hiring across multiple experience levels and is specifically looking for seasoned mechanics with strong hands-on experience and clean, detailed resumes that clearly outline aircraft platforms, job duties, and maintenance scope performed.
Candidates should expect a two-step interview process including a video interview with Talent Acquisition and a second interview with the Hiring Manager. Local candidates may complete the second interview in person.
Essential Duties and Responsibilities
Perform scheduled and unscheduled maintenance, inspections, troubleshooting, and repairs on corporate aircraft in accordance with FAA regulations and company standards
Complete airframe, powerplant, structural, and systems maintenance on business jets and related aircraft systems
Read and interpret maintenance manuals, engineering drawings, wiring diagrams, and technical documentation
Troubleshoot mechanical and electrical discrepancies and perform corrective actions
Complete accurate maintenance documentation, corrective actions, and logbook entries in compliance with FAR Part 43 requirements
Coordinate with maintenance control, inspection, and materials teams to support on-time return-to-service goals
Perform inspections and support final RTS sign-offs as required
Maintain a clean, safe, and organized work environment
Support team operations, assist other technicians, and ensure all work meets company quality and safety standards
Senior-level technicians may assist with training junior mechanics, assigning tasks, and leading maintenance projects
Requirements
Valid FAA Airframe & Powerplant (A&P) License required
5-7 years of aircraft maintenance experience required
Corporate aviation maintenance experience required
Experience on business jets required
Ability to work independently with minimal supervision
Advanced troubleshooting and inspection experience preferred
Preferred Aircraft Experience: Challenger 300, Global Express, Gulfstream GIV, Gulfstream G450, Cessna Citation X, Cessna Citation 560XL
Miscellaneous
Additional Requirements Minimum 3 years of experience required for consideration Tools must be etched; shadowed tools strongly preferred Strong attention to detail and high-quality workmanship required Ability to work overtime and flexible schedules as needed Valid driver’s license required Must be able to pass pre-employment screenings and comply with airport/security requirements
About Our Client
Our client is a highly respected leader in corporate aviation maintenance, specializing in premium business jet support, inspections, and return-to-service operations. Their team supports some of the most recognized aircraft platforms in private aviation and maintains exceptionally high standards for safety, compliance, and technical excellence.
This is an opportunity to join a stable, growth-focused operation where experienced technicians can build long-term careers while working on top-tier corporate aircraft in one of the busiest private aviation markets in the country.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
488080507228869
The Aircraft Mechanic troubleshoots, repairs, inspects and performs maintenance on customer aircraft. Performs and documents all work performed per appropriate manuals and regulations as required.
Essential Duties and Responsibilities
Adhere to General Work Requirements
Comply with Environmental / Health / Safety policies and procedures
Participate in 5-S activities
Perform all work in a safe and timely manner
Troubleshoot, repair, install, inspect and perform maintenance on customer aircraft
Perform and document work performed per appropriate manuals and regulations as required
Operate ground support equipment as required
Perform mechanical / electrical removals and installations
May assist with maintenance at off-site locations
Assist in providing time estimates
Assist in performing complex repairs on aircraft systems
Perform other duties as assigned
Requirements
Min of 3 years work exp as an Aircraft Technician OR Min 2 years work exp as an Aircraft Technician PLUS CRJ or Challenger airframe experience.
MRO experience is a plus
Airframe (A) License required.
Must possess their own tools.
Ability to effectively communicate in English aircraft maintenance actions both verbally and in writing.
Must be comfortable with 12-hour shift work, which includes days / nights and weekends.
Miscellaneous
About Our Client
For over 130 years our client innovative and integrated solutions have demonstrated our commitment to creating a positive social impact around the globe. Our range of products and services are tailored to meet our customers’ evolving needs across the commercial aviation, energy, transportation and infrastructure, machinery, defense and space systems sectors.
Our culture embraces diversity and cooperation, and we promote a healthy balance of professional and personal development, ensuring that your ideas and expertise are valued and respected.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
827214276082386
A&P Mechanics perform complex aircraft inspections, repairs, and modifications with minimal supervision. They must ensure that all work accomplished meets quality standards and specifications while interpreting aircraft technical manuals and electrical drawings. Mechanics must be able to follow standard operating procedures and operating support equipment such as external power carts, hydraulic mules, lift platforms, and tow tugs).
Essential Duties and Responsibilities
Perform scheduled, unscheduled or special inspections and maintenance in accordance with Manufacturer’s Maintenance Manuals and Federal Aviation regulations
Troubleshoot aircraft systems and perform operational and functional checks; service oil, tires, fuel and hydraulic systems; provide nitrogen and oxygen servicing; inspect and repair pitot static systems and provide battery servicing
Troubleshoot and perform maintenance/repairs/component removal/installation on aircraft, engines and a variety of electrical, mechanical and hydraulic components and accessories such as propellers, starters, generators, fuel pumps, hydraulic pumps, actuators, wheels, tires and brakes.
Perform structural repairs to airframes, including sheet metal work, riveting, patching and fiberglass/composite work
Certify all work as required by FAA regulations, industry guidelines and company standards/procedures, including interfaces as necessary with various computer tracking systems and using appropriate company forms
Make required entries for work orders, discrepancies, and corrective actions, and complete all associated computer/paperwork requirements, including turnover logs
Assist and train other technicians when needed
Participate in ongoing training opportunities, as appropriate for position
Perform other duties as assigned
Requirements
5+ years of aircraft maintenance experience
Current FAA Airframe and Powerplant license
High School Diploma or General Education Degree required.
Excellent interpersonal oral and written communication skills. Must be able to read, write and speak English.
Highly proficient with computer based technical data programs, and be competent in researching and use of appropriate technical manuals and industry reference materials
Must be mechanically adept and demonstrate the skills and knowledge consistent with industry standards for this position, including an understanding of various airframe and power plant systems.
Must be able to work inside and outside under varying work and climatic conditions, have the ability to lift up to 70 pounds and must be comfortable with heights.
Must have own tools
Experience desired on CRJ and ERJ aircraft, Sheet metal experience is a plus
Must have strong drive for top notch customer service and safety, and be a team player with a “Can Do” attitude.
This is a safety-sensitive position and falls under the provisions of the FAA's mandatory drug and alcohol testing requirements, including the release of prior drug and alcohol testing results from previous employers for the past two (2) years
Must pass a pre-employment drug screening and full background investigation which may include education, criminal and work history verifications. If hired, will be subject to mandatory random drug testing.
Miscellaneous
Must Bring Tools
About Our Client
Our client is a complete, one stop FAR part 145 repair station housed in a 32,000 square foot hangar facility located on Sioux City, Iowa's Sioux Gateway Airport (KSUX). They have all the necessary capabilities required to take care of any and all of their clients airline's needs. They provide a complete range of in-house maintenance and repair options from heavy checks, line maintenance, sheet metal repair and fabrication, all the way to complete exterior aircraft paint. They currently have numerous aircraft and engines on our certificate, including General Electric, Pratt an Whitney, and Rolls Royce. Aircraft include Saab, Beech, Embraer, De Haviland, and Bombardier CRJ 900 and Q 400 aircraft. In addition, we have staff mechanics, equipment, and personnel ready at a moments notice to dispatch 24/7 to any location necessary to get your AOG aircraft back in service.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
894045108670724
We are seeking experienced A&P Mechanics for a premier corporate aviation maintenance operation in Bay City, WI. These openings support business jet maintenance, inspections, troubleshooting, and return-to-service activities in a high-standard Part 145 environment. Candidates must have strong corporate aircraft maintenance experience and be comfortable working in a fast-paced, quality-driven operation with high expectations for professionalism and technical ability.
This client is hiring across multiple experience levels and is specifically looking for seasoned mechanics with strong hands-on experience and clean, detailed resumes that clearly outline aircraft platforms, job duties, and maintenance scope performed.
Candidates should expect a two-step interview process including a video interview with Talent Acquisition and a second interview with the Hiring Manager. Local candidates may complete the second interview in person.
Essential Duties and Responsibilities
Perform scheduled and unscheduled maintenance, inspections, troubleshooting, and repairs on corporate aircraft in accordance with FAA regulations and company standards
Complete airframe, powerplant, structural, and systems maintenance on business jets and related aircraft systems
Read and interpret maintenance manuals, engineering drawings, wiring diagrams, and technical documentation
Troubleshoot mechanical and electrical discrepancies and perform corrective actions
Complete accurate maintenance documentation, corrective actions, and logbook entries in compliance with FAR Part 43 requirements
Coordinate with maintenance control, inspection, and materials teams to support on-time return-to-service goals
Perform inspections and support final RTS sign-offs as required
Maintain a clean, safe, and organized work environment
Support team operations, assist other technicians, and ensure all work meets company quality and safety standards
Senior-level technicians may assist with training junior mechanics, assigning tasks, and leading maintenance projects
Requirements
Valid FAA Airframe & Powerplant (A&P) License required
3–5 years of aircraft maintenance experience required
Corporate aviation maintenance experience required
Experience on business jets required
Preferred Aircraft Experience: Challenger 300, Global Express, Gulfstream GIV, Gulfstream G450, Cessna Citation X, Cessna Citation 560XL
Miscellaneous
Additional Requirements Minimum 3 years of experience required for consideration Tools must be etched; shadowed tools strongly preferred Strong attention to detail and high-quality workmanship required Ability to work overtime and flexible schedules as needed Valid driver’s license required Must be able to pass pre-employment screenings and comply with airport/security requirements
About Our Client
Our client is a highly respected leader in corporate aviation maintenance, specializing in premium business jet support, inspections, and return-to-service operations. Their team supports some of the most recognized aircraft platforms in private aviation and maintains exceptionally high standards for safety, compliance, and technical excellence.
This is an opportunity to join a stable, growth-focused operation where experienced technicians can build long-term careers while working on top-tier corporate aircraft in one of the busiest private aviation markets in the country.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
722940332325030
The Aircraft Mechanic troubleshoots, repairs, inspects and performs maintenance on commercial aircraft. Performs and documents all work performed per appropriate manuals and regulations as required.
Essential Duties and Responsibilities
Adhere to clients General Work Requirements
Comply with Environmental / Health / Safety policies and procedures
Participate in 5-S activities
Perform all work in a safe and timely manner
Troubleshoot, repair, install, inspect and perform maintenance on customer aircraft
Perform and document work performed per appropriate manuals and regulations as required
Operate ground support equipment as required
Perform mechanical / electrical removals and installations
May assist with maintenance at off-site locations
Assist in providing time estimates
Assist in performing complex repairs on aircraft systems
Perform other duties as assigned
Requirements
Minimum of 5-8 years of work experience as an Aircraft Technician in an MRO / Heavy Maintenance environment.
FAA Airframe (A) License is required.
CRJ airframe experience is required.
If former military, those with military aircraft maintenance experience such as Depot/Isochronal/Phase inspections is a plus.
Miscellaneous
About Our Client
For over 130 years our client innovative and integrated solutions have demonstrated our commitment to creating a positive social impact around the globe. Our range of products and services are tailored to meet our customers’ evolving needs across the commercial aviation, energy, transportation and infrastructure, machinery, defense and space systems sectors.
Our culture embraces diversity and cooperation, and we promote a healthy balance of professional and personal development, ensuring that your ideas and expertise are valued and respected.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
635265999277331
We are seeking experienced A&P Mechanics for a premier corporate aviation maintenance operation in Van Nuys, California. These openings support business jet maintenance, inspections, troubleshooting, and return-to-service activities in a high-standard Part 145 environment. Candidates must have strong corporate aircraft maintenance experience and be comfortable working in a fast-paced, quality-driven operation with high expectations for professionalism and technical ability.
This client is hiring across multiple experience levels and is specifically looking for seasoned mechanics with strong hands-on experience and clean, detailed resumes that clearly outline aircraft platforms, job duties, and maintenance scope performed.
Candidates should expect a two-step interview process including a video interview with Talent Acquisition and a second interview with the Hiring Manager. Local candidates may complete the second interview in person.
Essential Duties and Responsibilities
Perform scheduled and unscheduled maintenance, inspections, troubleshooting, and repairs on corporate aircraft in accordance with FAA regulations and company standards
Complete airframe, powerplant, structural, and systems maintenance on business jets and related aircraft systems
Read and interpret maintenance manuals, engineering drawings, wiring diagrams, and technical documentation
Troubleshoot mechanical and electrical discrepancies and perform corrective actions
Complete accurate maintenance documentation, corrective actions, and logbook entries in compliance with FAR Part 43 requirements
Coordinate with maintenance control, inspection, and materials teams to support on-time return-to-service goals
Perform inspections and support final RTS sign-offs as required
Maintain a clean, safe, and organized work environment
Support team operations, assist other technicians, and ensure all work meets company quality and safety standards
Senior-level technicians may assist with training junior mechanics, assigning tasks, and leading maintenance projects
Requirements
Valid FAA Airframe & Powerplant (A&P) License required
Over 7 years of aircraft maintenance experience required
Corporate aviation maintenance experience required
Experience on business jets required
Ability to work independently with minimal supervision
Advanced troubleshooting and inspection experience
Strong leadership and senior-level maintenance experience required
Ability to lead projects, mentor technicians, and support inspections and RTS activities preferred
Preferred Aircraft Experience: Challenger 300, Global Express, Gulfstream GIV, Gulfstream G450, Cessna Citation X, Cessna Citation 560XL
Miscellaneous
Additional Requirements Minimum 3 years of experience required for consideration Tools must be etched; shadowed tools strongly preferred Strong attention to detail and high-quality workmanship required Ability to work overtime and flexible schedules as needed Valid driver’s license required Must be able to pass pre-employment screenings and comply with airport/security requirements
About Our Client
Our client is a highly respected leader in corporate aviation maintenance, specializing in premium business jet support, inspections, and return-to-service operations. Their team supports some of the most recognized aircraft platforms in private aviation and maintains exceptionally high standards for safety, compliance, and technical excellence.
This is an opportunity to join a stable, growth-focused operation where experienced technicians can build long-term careers while working on top-tier corporate aircraft in one of the busiest private aviation markets in the country.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
923868989718762
