Find the right job for your preferred location and specialty
Jobs Available
11 - 20 of 50 Matches
A&P Mechanics perform complex aircraft inspections, repairs, and modifications with minimal supervision. They must ensure that all work accomplished meets quality standards and specifications while interpreting aircraft technical manuals and electrical drawings. Mechanics must be able to follow standard operating procedures and operating support equipment such as external power carts, hydraulic mules, lift platforms, and tow tugs).
Essential Duties and Responsibilities
Perform scheduled, unscheduled or special inspections and maintenance in accordance with Manufacturer’s Maintenance Manuals and Federal Aviation regulations
Troubleshoot aircraft systems and perform operational and functional checks; service oil, tires, fuel and hydraulic systems; provide nitrogen and oxygen servicing; inspect and repair pitot static systems and provide battery servicing
Troubleshoot and perform maintenance/repairs/component removal/installation on aircraft, engines and a variety of electrical, mechanical and hydraulic components and accessories such as propellers, starters, generators, fuel pumps, hydraulic pumps, actuators, wheels, tires and brakes.
Perform structural repairs to airframes, including sheet metal work, riveting, patching and fiberglass/composite work
Certify all work as required by FAA regulations, industry guidelines and company standards/procedures, including interfaces as necessary with various computer tracking systems and using appropriate company forms
Make required entries for work orders, discrepancies, and corrective actions, and complete all associated computer/paperwork requirements, including turnover logs
Assist and train other technicians when needed
Participate in ongoing training opportunities, as appropriate for position
Perform other duties as assigned
Requirements
2-5 years of aircraft maintenance experience
Current FAA Airframe and Powerplant license
High School Diploma or General Education Degree required.
Excellent interpersonal oral and written communication skills. Must be able to read, write and speak English.
Highly proficient with computer based technical data programs, and be competent in researching and use of appropriate technical manuals and industry reference materials
Must be mechanically adept and demonstrate the skills and knowledge consistent with industry standards for this position, including an understanding of various airframe and power plant systems.
Must be able to work inside and outside under varying work and climatic conditions, have the ability to lift up to 70 pounds and must be comfortable with heights.
Must have own tools
Experience desired on CRJ and ERJ aircraft, Sheet metal experience is a plus
Must have strong drive for top notch customer service and safety, and be a team player with a “Can Do” attitude.
This is a safety-sensitive position and falls under the provisions of the FAA's mandatory drug and alcohol testing requirements, including the release of prior drug and alcohol testing results from previous employers for the past two (2) years
Must pass a pre-employment drug screening and full background investigation which may include education, criminal and work history verifications. If hired, will be subject to mandatory random drug testing.
Miscellaneous
Must Bring Tools
About Our Client
Our client is a complete, one stop FAR part 145 repair station housed in a 32,000 square foot hangar facility located on Sioux City, Iowa's Sioux Gateway Airport (KSUX). They have all the necessary capabilities required to take care of any and all of their clients airline's needs. They provide a complete range of in-house maintenance and repair options from heavy checks, line maintenance, sheet metal repair and fabrication, all the way to complete exterior aircraft paint. They currently have numerous aircraft and engines on our certificate, including General Electric, Pratt an Whitney, and Rolls Royce. Aircraft include Saab, Beech, Embraer, De Haviland, and Bombardier CRJ 900 and Q 400 aircraft. In addition, we have staff mechanics, equipment, and personnel ready at a moments notice to dispatch 24/7 to any location necessary to get your AOG aircraft back in service.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
119413428058569
As an A&P Mechanic Entry Level, you will be responsible for performing routine and non-routine maintenance on commercial aircraft.
Essential Duties and Responsibilities
Perform preventive maintenance, repairs, part replacement and modifications for aircraft
Perform the assigned maintenance task in accordance with the Federal Aviation Regulations, manufacturer’s recommendations, customers approved maintenance program, approved or acceptable data.
Troubleshoot problems, make repairs, and prepare areas for complete inspections.
Perform high quality and airworthy work in accordance with the Task Card instructions provided to them by the Project Manager and/or their Lead.
Become familiar with and follow the requirements of this Repair Station Manual, Federal Aviation Regulations, Airworthiness Directives, advisory circular, manufacturer’s service bulletins and any other required to perform their assigned work.
Never begin any maintenance unless in possession of the proper, current and applicable approved or acceptable data.
Report any difficulties, uncertainties, unserviceable equipment or potential safety hazards to their supervisor and observe all safety precautions in the performance of assigned tasks at all times.
Report any tool issues to stores and ensure the correct tag is attached and properly completed.
Take part in any required training including GMM and safety.
Proven ability to work alone and in a team environment.
Requirements
0-1 year aircraft maintenance experience
A&P License
Have own tools
Adhere to standard procedures and policies.
Accurately and legibly, record the maintenance or alteration on the proper repair station and/or customer supplied forms including their signature or initials and employee number.
Able to perform intermediate/heavy maintenance tasks with little supervision.
Perform flight control and engine throttle rigging.
Miscellaneous
Tools are required
About Our Client
Our client hosts maintenance facilities in Calgary, Canada, Great Falls, MT and Jacksonville, FL providing complete maintenance, interiors refurbishment and storage capabilities for regional airlines, manufacturers and aircraft leasing companies.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
227667338434694
Our client is seeking A&P Mechanics to support widebody heavy maintenance operations at their industry-leading MRO facility. This is a high-impact role for individuals with solid fundamentals and a willingness to grow into 767 expertise.
Essential Duties and Responsibilities
Perform inspections, repairs, and modifications on widebody aircraft (primarily 767s)
Follow all FAA, manufacturer, and company procedures for safety and compliance
Troubleshoot mechanical discrepancies and work collaboratively with QA and Engineering teams
Accurately document all maintenance actions and complete associated paperwork
Support ramp-up projects and participate in continuous improvement initiatives
Requirements
FAA A&P license required
Minimum of 1 year of commercial aircraft maintenance experience
767 or other widebody aircraft experience highly preferred
767 Gen Fam is a major plus—contractors may be eligible to attend after 6 months on-site
Must have own tools
Must be able to read, write, and speak English
Must be able to pass a 10-year background check and drug screen
Miscellaneous
About Our Client
Our client operates one of the most respected heavy maintenance MRO facilities in the country. Located in Wilmington, OH, this site specializes in widebody aircraft—particularly the Boeing 767—and serves major commercial and cargo airlines. With a strong focus on safety, quality, and continuous improvement, the facility offers cutting-edge tools, large-scale projects, and a collaborative team environment. Contractors who demonstrate commitment and performance may have access to Gen Fam training and long-term opportunities. This is a prime location for technicians looking to build experience on widebody aircraft and grow with a leader in the aviation industry.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
613394211136488
The Quality Inspector plays a crucial role in ensuring the airworthiness and safety of aircraft by performing detailed inspections, coordinating maintenance tracking programs, and verifying compliance with regulatory and customer requirements. This position involves reviewing aircraft documentation, conducting return-to-service procedures, and supporting overall quality assurance processes.
Essential Duties and Responsibilities
Adhere to General Work Requirements in coordination with Quality leadership to ensure regulatory compliance.
Conduct aircraft weighing procedures per manufacturer-recommended practices and procedures.
Upon aircraft arrival, review and obtain all associated documentation, ensuring accurate recordkeeping.
Coordinate inspection activities in compliance with maintenance tracking programs (e.g., CAMPS, AVTRAC).
Inspect aircraft, engines, parts, and components using precision tools and equipment to verify compliance with regulatory requirements.
Perform inspections on new, repaired, or rebuilt parts/components for damage, conformity, and accuracy upon receipt.
Ensure all work orders, maintenance records, and corrective actions are properly documented and that all required regulatory approvals (FAA, FAR/CAA, etc.) are obtained.
Research aircraft technical drawings and data (e.g., REO, ENICO, EO, DCN) to support maintenance tasks.
Conduct walk-around inspections to verify aircraft readiness for return to service.
Execute return-to-service procedures, ensuring that all airworthiness requirements are met before aircraft release.
Provide technical data and reports to customers as required.
Requirements
Airframe & Powerplant (A&P) Certification is required.
8+ years of aircraft maintenance experience or substantiated equivalent experience.
2+ years of corporate or commercial jet experience.
Must own a basic set of hand tools and demonstrate proper inventory and control.
Proficiency in using measuring tools and test equipment for inspections.
Ability to interpret and process regulatory documents, including FAA regulations, CAA, RSM/QCM, ADs, SBs, and TCDS.
Knowledge of return-to-service procedures and regulatory compliance requirements.
Strong ability to train, coach, and mentor employees within areas of qualification.
Miscellaneous
About Our Client
Our client is a global leader in aviation, committed to creating cutting-edge aircraft that set the standard for performance, reliability, and innovation. With headquarters in Montreal, Canada, they operate globally, including in the U.S., where they maintain a significant presence.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
177730413553145
A&P Mechanics perform complex aircraft inspections, repairs, and modifications with minimal supervision. They must ensure that all work accomplished meets quality standards and specifications while interpreting aircraft technical manuals and electrical drawings. Mechanics must be able to follow standard operating procedures and operating support equipment such as external power carts, hydraulic mules, lift platforms, and tow tugs).
Essential Duties and Responsibilities
Perform scheduled, unscheduled or special inspections and maintenance in accordance with Manufacturer’s Maintenance Manuals and Federal Aviation regulations
Troubleshoot aircraft systems and perform operational and functional checks; service oil, tires, fuel and hydraulic systems; provide nitrogen and oxygen servicing; inspect and repair pitot static systems and provide battery servicing
Troubleshoot and perform maintenance/repairs/component removal/installation on aircraft, engines and a variety of electrical, mechanical and hydraulic components and accessories such as propellers, starters, generators, fuel pumps, hydraulic pumps, actuators, wheels, tires and brakes.
Perform structural repairs to airframes, including sheet metal work, riveting, patching and fiberglass/composite work
Certify all work as required by FAA regulations, industry guidelines and company standards/procedures, including interfaces as necessary with various computer tracking systems and using appropriate company forms
Make required entries for work orders, discrepancies, and corrective actions, and complete all associated computer/paperwork requirements, including turnover logs
Assist and train other technicians when needed
Participate in ongoing training opportunities, as appropriate for position
Perform other duties as assigned
Requirements
0-2 years of relevant experience. *Will accept candidates straight out of school*
A&P License required
High School Diploma or General Education Degree required.
Excellent interpersonal oral and written communication skills. Must be able to read, write and speak English.
Highly proficient with computer based technical data programs, and be competent in researching and use of appropriate technical manuals and industry reference materials
Must be mechanically adept and demonstrate the skills and knowledge consistent with industry standards for this position, including an understanding of various airframe and power plant systems.
Must be able to work inside and outside under varying work and climatic conditions, have the ability to lift up to 70 pounds and must be comfortable with heights.
Must have own tools
Experience desired on CRJ and ERJ aircraft, Sheet metal experience is a plus
Must have strong drive for top notch customer service and safety, and be a team player with a “Can Do” attitude.
This is a safety-sensitive position and falls under the provisions of the FAA's mandatory drug and alcohol testing requirements, including the release of prior drug and alcohol testing results from previous employers for the past two (2) years
Must pass a pre-employment drug screening and full background investigation which may include education, criminal and work history verifications. If hired, will be subject to mandatory random drug testing.
Miscellaneous
Must Bring Tools
About Our Client
Our client is a complete, one stop FAR part 145 repair station housed in a 32,000 square foot hangar facility located on Sioux City, Iowa's Sioux Gateway Airport (KSUX). They have all the necessary capabilities required to take care of any and all of their clients airline's needs. They provide a complete range of in-house maintenance and repair options from heavy checks, line maintenance, sheet metal repair and fabrication, all the way to complete exterior aircraft paint. They currently have numerous aircraft and engines on our certificate, including General Electric, Pratt an Whitney, and Rolls Royce. Aircraft include Saab, Beech, Embraer, De Haviland, and Bombardier CRJ 900 and Q 400 aircraft. In addition, we have staff mechanics, equipment, and personnel ready at a moments notice to dispatch 24/7 to any location necessary to get your AOG aircraft back in service.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
782834372066747
The Aircraft Engine Maintenance Technician is responsible for performing inspections, troubleshooting, repairs, and maintenance on aircraft engines and related components. This role involves working on-site and off-site, supporting engine installations, disassemblies, and operational tests while ensuring compliance with regulatory and company standards.
Essential Duties and Responsibilities
Conduct periodic inspections of aircraft engines, including Major Periodic Inspections (MPI) and Hot Section Inspections (HSI) following maintenance manuals.
Diagnose and repair basic engine and aircraft-related issues at various locations.
Assist in complex engine repairs and troubleshooting in collaboration with senior technicians.
Remove, install, and replace engines and accessories.
Disassemble, inspect, and reassemble aircraft engines with precision.
Replace Line Replaceable Units (LRUs) as required.
Support aircraft fueling and defueling operations.
Assist in performing engine operational checks and functional tests.
Operate ground support equipment (GSE), such as power units, tugs, hydraulic mules, and oxygen servicing units.
Work alongside Aviation Maintenance Technicians and Electronic/Avionics Technicians in troubleshooting and repairing aircraft systems.
Perform basic sheet metal and electrical repairs when necessary.
Access and reinstall aircraft components obstructing assigned maintenance tasks.
May act as a Designated Inspector (DI) if qualified by Quality Assurance (QA).
Provide support to team members across different maintenance areas.
Requirements
Airframe & Powerplant (A&P) license is required.
4+ years of experience in aircraft turbine engine maintenance.
Ability to read and interpret engineering documents and repair manuals accurately.
Strong troubleshooting skills with the ability to work independently and in a team.
Familiarity with aircraft maintenance procedures and safety protocols.
Experience working with ground support equipment (GSE) is a plus.
Willingness to travel for on-site and off-site maintenance assignments.
Miscellaneous
About Our Client
Our client is a global leader in aviation, committed to creating cutting-edge aircraft that set the standard for performance, reliability, and innovation. With headquarters in Montreal, Canada, they operate globally, including in the U.S., where they maintain a significant presence. The Wichita, KS, facility is dedicated to producing and maintaining some of the most advanced aircraft in the world, delivering unparalleled quality and service to their clients.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
167330506687422
A&P Mechanics perform complex aircraft inspections, repairs, and modifications with minimal supervision. They must ensure that all work accomplished meets quality standards and specifications while interpreting aircraft technical manuals and electrical drawings. Mechanics must be able to follow standard operating procedures and operating support equipment such as external power carts, hydraulic mules, lift platforms, and tow tugs).
Essential Duties and Responsibilities
Perform scheduled, unscheduled or special inspections and maintenance in accordance with Manufacturer’s Maintenance Manuals and Federal Aviation regulations
Troubleshoot aircraft systems and perform operational and functional checks; service oil, tires, fuel and hydraulic systems; provide nitrogen and oxygen servicing; inspect and repair pitot static systems and provide battery servicing
Troubleshoot and perform maintenance/repairs/component removal/installation on aircraft, engines and a variety of electrical, mechanical and hydraulic components and accessories such as propellers, starters, generators, fuel pumps, hydraulic pumps, actuators, wheels, tires and brakes.
Perform structural repairs to airframes, including sheet metal work, riveting, patching and fiberglass/composite work
Certify all work as required by FAA regulations, industry guidelines and company standards/procedures, including interfaces as necessary with various computer tracking systems and using appropriate company forms
Make required entries for work orders, discrepancies, and corrective actions, and complete all associated computer/paperwork requirements, including turnover logs
Assist and train other technicians when needed
Participate in ongoing training opportunities, as appropriate for position
Perform other duties as assigned
Requirements
2-5 years of aircraft maintenance experience
Current FAA Airframe and Powerplant license
High School Diploma or General Education Degree required.
Excellent interpersonal oral and written communication skills. Must be able to read, write and speak English.
Highly proficient with computer based technical data programs, and be competent in researching and use of appropriate technical manuals and industry reference materials
Must be mechanically adept and demonstrate the skills and knowledge consistent with industry standards for this position, including an understanding of various airframe and power plant systems.
Must be able to work inside and outside under varying work and climatic conditions, have the ability to lift up to 70 pounds and must be comfortable with heights.
Must have own tools
Experience desired on CRJ and ERJ aircraft, Sheet metal experience is a plus
Must have strong drive for top notch customer service and safety, and be a team player with a “Can Do” attitude.
This is a safety-sensitive position and falls under the provisions of the FAA's mandatory drug and alcohol testing requirements, including the release of prior drug and alcohol testing results from previous employers for the past two (2) years
Must pass a pre-employment drug screening and full background investigation which may include education, criminal and work history verifications. If hired, will be subject to mandatory random drug testing.
Miscellaneous
Must Bring Tools
About Our Client
Our client is a complete, one stop FAR part 145 repair station housed in a 32,000 square foot hangar facility located on Sioux City, Iowa's Sioux Gateway Airport (KSUX). They have all the necessary capabilities required to take care of any and all of their clients airline's needs. They provide a complete range of in-house maintenance and repair options from heavy checks, line maintenance, sheet metal repair and fabrication, all the way to complete exterior aircraft paint. They currently have numerous aircraft and engines on our certificate, including General Electric, Pratt an Whitney, and Rolls Royce. Aircraft include Saab, Beech, Embraer, De Haviland, and Bombardier CRJ 900 and Q 400 aircraft. In addition, we have staff mechanics, equipment, and personnel ready at a moments notice to dispatch 24/7 to any location necessary to get your AOG aircraft back in service.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
134464670260658
A&P Mechanics perform complex aircraft inspections, repairs, and modifications with minimal supervision. They must ensure that all work accomplished meets quality standards and specifications while interpreting aircraft technical manuals and electrical drawings. Mechanics must be able to follow standard operating procedures and operating support equipment such as external power carts, hydraulic mules, lift platforms, and tow tugs).
Essential Duties and Responsibilities
Perform scheduled, unscheduled or special inspections and maintenance in accordance with Manufacturer’s Maintenance Manuals and Federal Aviation regulations
Troubleshoot aircraft systems and perform operational and functional checks; service oil, tires, fuel and hydraulic systems; provide nitrogen and oxygen servicing; inspect and repair pitot static systems and provide battery servicing
Troubleshoot and perform maintenance/repairs/component removal/installation on aircraft, engines and a variety of electrical, mechanical and hydraulic components and accessories such as propellers, starters, generators, fuel pumps, hydraulic pumps, actuators, wheels, tires and brakes.
Perform structural repairs to airframes, including sheet metal work, riveting, patching and fiberglass/composite work
Certify all work as required by FAA regulations, industry guidelines and company standards/procedures, including interfaces as necessary with various computer tracking systems and using appropriate company forms
Make required entries for work orders, discrepancies, and corrective actions, and complete all associated computer/paperwork requirements, including turnover logs
Assist and train other technicians when needed
Participate in ongoing training opportunities, as appropriate for position
Perform other duties as assigned
Requirements
5+ years of aircraft maintenance experience
Current FAA Airframe and Powerplant license
High School Diploma or General Education Degree required.
Excellent interpersonal oral and written communication skills. Must be able to read, write and speak English.
Highly proficient with computer based technical data programs, and be competent in researching and use of appropriate technical manuals and industry reference materials
Must be mechanically adept and demonstrate the skills and knowledge consistent with industry standards for this position, including an understanding of various airframe and power plant systems.
Must be able to work inside and outside under varying work and climatic conditions, have the ability to lift up to 70 pounds and must be comfortable with heights.
Must have own tools
Experience desired on CRJ and ERJ aircraft, Sheet metal experience is a plus
Must have strong drive for top notch customer service and safety, and be a team player with a “Can Do” attitude.
This is a safety-sensitive position and falls under the provisions of the FAA's mandatory drug and alcohol testing requirements, including the release of prior drug and alcohol testing results from previous employers for the past two (2) years
Must pass a pre-employment drug screening and full background investigation which may include education, criminal and work history verifications. If hired, will be subject to mandatory random drug testing.
Miscellaneous
Must Bring Tools
About Our Client
Our client is a complete, one stop FAR part 145 repair station housed in a 32,000 square foot hangar facility located on Sioux City, Iowa's Sioux Gateway Airport (KSUX). They have all the necessary capabilities required to take care of any and all of their clients airline's needs. They provide a complete range of in-house maintenance and repair options from heavy checks, line maintenance, sheet metal repair and fabrication, all the way to complete exterior aircraft paint. They currently have numerous aircraft and engines on our certificate, including General Electric, Pratt an Whitney, and Rolls Royce. Aircraft include Saab, Beech, Embraer, De Haviland, and Bombardier CRJ 900 and Q 400 aircraft. In addition, we have staff mechanics, equipment, and personnel ready at a moments notice to dispatch 24/7 to any location necessary to get your AOG aircraft back in service.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
135961581064723
The A&P Mechanic maintains the Company’s aircraft in a safe and airworthy condition according to the Company maintenance manual and FAR regulations. Conducts or assists with all inspections and repairs on aircraft and aircraft sub-assemblies and performs required documentation, billing, regulatory and other administrative tasks in adherence with Company, customer and FAA policies.
Essential Duties and Responsibilities
Performs scheduled maintenance on aircraft, as assigned.
Ensures accuracy and timeliness of completed tasks.
Troubleshoots and repairs damaged, worn, or defective mechanical components.
Performs pre-flight and post-flight inspections on aircraft as time permits.
Reports discrepancies to Maintenance Manager or Pilot in Command.
Documents maintenance activities.
Completes required paperwork, including return to service requirements.
Observes current applicable FAA Regulations and GMM’s while performing required maintenance.
Complies with Company safety policies and procedures.
Maintains general cleanliness of hangar, parts/tool rooms and ramp areas, including operation of hangar floor cleaning machine.
Participates in preplanning briefing to ensure complete understanding of the project work scope, man-hour availability and projected completion date.
Ensures proper job planning so that parts and other resources are available in a timely manner to meet milestones and deadlines.
Demonstrates proper inspection and repair procedures.
Ensures that the work order is opened and updated throughout the project in a timely manner.
Ensures that squawks on work orders are accurate and descriptive.
Ensures that time and parts billed on a work order are accurate, justified and reasonable.
Trains, coaches and provides oversight to junior A&P’s.
Serves as a positive role model for ethical behavior and promotes an awareness and understanding of positive ethical and moral principles consistent with these principles; promotes and supports the mission, vision and values of the Company.
Performs other duties and assignments, as required.
Requirements
Minimum 5 years experience on corporate jets – Gulfstream, Learjet, Hawker, Challenger, Falcon experience is required
Experience performing scheduled inspections, line maintenance or sheet metal work on Gulfstream, Learjet, Hawker, Challenger, Falcon
A&P License Required
Local candidates preferred
Miscellaneous
Must bring tools
About Our Client
Our client is a full service corporate aircraft maintenance facility based in the DFW metroplex. Founded in 2008 by a team of highly experienced aviation professionals, they have grown into one of the most dependable aircraft maintenance operations in the industry.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
136472313167589
The A&P Mechanic I will perform such typical maintenance operations as the removal and replacement of aircraft and powerplant components, troubleshoot, repair, clean, service, inspect, modify, replace, and/or overhaul aircraft and aircraft systems using approved data to ensure airworthiness.
Essential Duties and Responsibilities
Perform all work assigned in accordance with approved FAA data.
Ensure complete and proper documentation of work performed.
Ensure that all maintenance performed is in an air worthy condition.
Maintain the premises and the repair station in a clean and organized manner.
Perform additional duties as requested by supervisor or other management personnel.
This is a safety sensitive position and is subject to submit to pre-employment and periodic DOT regulations for drug and alcohol testing.
Requirements
18 months+ recent experience utilizing A & P license
Large commercial aircraft experience preferred but corporate, general or military aircraft will be considered.
Must have Airframe & Power Plant (A&P) License
Must have own tools
High School Diploma or GED
Physical Requirements: Bend, squat, sit, stand, walk, crawl, work in tight spaces and handle objects. Occasionally required to push/pull, stack, reach above shoulder level or carry light-weight materials.
Miscellaneous
About Our Client
Our Client provides aftermarket commercial aircraft, engines, and its parts to passenger and cargo airlines, leasing companies, original equipment manufacturers, and government and defense contractors, as well as maintenance, repair, and overhaul (MRO) service providers worldwide. They were founded in 2008 and are headquartered in Florida.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
105787680360737
