Find the right job for your preferred location and specialty
Jobs Available
1 - 10 of 170 Matches
The Sheet Metal Mechanic is responsible for high proficiency in all minor through major repairs, modifications, E.A.s, and with minimal supervision.
Essential Duties and Responsibilities
Remove and replace various aircraft components with the use of special tooling and ground support equipment following oral and written instructions such as supervisor’s directives and manuals to complete all routine and non-routine assignments in a timely manner.
Proficient detail blueprint reading, ability to read, interpret and work from service bulletins, engineering work orders, major S.R.M. structural repairs.
Ability to layout work using bend radius, set back and bend allowance charts, utilization of shop math, install and/or splice spars, landing gear, trunion changes, pressure bulkhead repairs and keal beam repairs/ removal and reinstall.
Knowledge of ATA codes, knowledge of all applicable F.A.R.’s and company policies and procedures including job card/ time card, routine/ non-routine cards, S.R.M.’s, service bulletins, E.O.’s, and work sign-off/ sell-off procedures.
Perform the duties of and provide the necessary training for lower skill levels.
Maintain and store tools in a serviceable condition.
Adhere to safe maintenance practices and keep a clean work area.
Maintain and supply personal records of work performed on OJT forms for the Training Department.
Successfully complete any courses deemed necessary by the Training Department.
Perform any work that may be assigned by his or her supervisor.
Requirements
8+ years of aviation structures mechanic experience
Tools are required
Miscellaneous
About Our Client
Our client hosts maintenance facilities in Calgary, Canada, Great Falls, MT and Jacksonville, FL providing complete maintenance, interiors refurbishment and storage capabilities for regional airlines, manufacturers and aircraft leasing companies.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
175073016575661
4 years' experience in aircraft repair bonding in an aerospace environment
2nd Shift / Will have to train on 1st shift for at least 30 days
Competitive pay DOE
Applies advanced technical skills and knowledge to fabricate, rework and repair metallic and nonmetallic bonded parts and assemblies for operational aircraft applications. Performs any of the detailed work operations required to be completed in this area of specialization.
Essential Duties and Responsibilities
Essential Functions and Key Responsibilities: Performs bonding of metallic and nonmetallic materials to fabricate parts, components and assemblies for aircraft applications using products and processes that are varied and moderately complex to complex in scope. The level of work requires experience and sound judgment. Read and interpret blueprints, drawings, manuals, specifications sketches, job orders, planning documents and engineering drawings. Determine equipment requirements and the method and sequences of operation to be followed in fabrication of parts using materials such as graphite, fiberglass, plastic, boron, flock, mat, epoxy resins, rubber and like materials. Plans, lays out, fabricates and builds adhesive bonded assemblies of metallic and nonmetallic composite materials. Fabricate composite and metal parts into subassemblies for the purpose of prefitting in preparation for bonding/curing in presses, ovens, and autoclaves. Lays out, prefits, assembles and performs lay-up on a variety of metal to metal and composite bonded assemblies. Fits core in panels where close tolerances are required for installation of details for completion of assembly. Performs vacuum bagging for Autoclave cures up to 100 psi. Lays out and marks dimensions and reference lines on material to develop and trace patterns of product or parts, or uses templates. Selects tooling and materials compatible with the processing techniques identified in the work instructions. Performs rework or repair on any metallic or nonmetallic part presented for rework or repair.
Requirements
4 years experience in Aircraft Repair Bonding in an aerospace environment
Special Skills, Licenses or Job Requirements: Demonstrate competency in applying the following in performing normal job duties. • Reading and interpreting work instructions, properly documenting work performed on such documents as process planning, adhesive log sheets, Material Review Board documents, Engineering Work Orders, Change Notices, Engineering Process Specifications, technical manuals and like documentation. • Use close tolerance measuring tools i.e. scales, micrometers, calipers, depth gages and like tools.
Special Training and Behavioral Competencies: • Safety training as required by OSHA. • Intermediate blueprint reading.
Miscellaneous
About Our Client
This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
175428247312760
We are seeking a skilled Structural Fabricator to support aircraft structural and component fabrication in a backshop environment. This role focuses on precision fabrication, modification, and repair of aircraft structures and components, supporting maintenance and production teams through high-quality workmanship, compliance, and collaboration. The ideal candidate brings hands-on fabrication expertise, corporate aviation exposure, and a strong commitment to safety and quality.
Essential Duties and Responsibilities
Adhere to general work requirements applicable to factory, shop, and hangar environments
Comply with all environmental, health, and safety policies and procedures
Participate in 5S initiatives and maintain a safe, organized work area
Troubleshoot, inspect, repair, and maintain aircraft structural components
Fabricate and modify aircraft structural parts and assemblies
Perform structural repairs on composite components, both attached and detached
Remove and install aircraft components as required
Conduct or assist with inspections for hidden damage on aircraft structures
Support and perform complex structural repairs on or off the aircraft
Document all work in accordance with approved manuals and regulatory requirements
Operate ground support equipment as required
Repair or assist in the repair of aircraft and shop components
Perform mechanical and limited electrical component removals and installations
Inspect confined areas of the airframe
Assist with wing removal and reinstallation activities as needed
Support off-site maintenance activities when required
Design, modify, and weld metal fixtures as needed
Fabricate parts for ground support equipment
Assist with aircraft towing operations
Collaborate effectively with other maintenance and fabrication disciplines
Perform other duties as assigned to support operational needs
Requirements
Minimum 4 years of structural fabrication experience (or substantiated equivalent experience)
Minimum 1 year of corporate aircraft experience
Completion of a Sheet Metal Aircraft Technician School or equivalent technical training
Ability to read, interpret, and work from mechanical and engineering drawings
Strong written and verbal communication skills related to task execution and aircraft status
Ownership of a basic set of hand tools, with the ability to demonstrate proper inventory control
Ability to obtain required Ground Support Equipment (GSE) qualifications
Willingness to work unscheduled overtime, including weekends and holidays
Ability to work outdoors in seasonal and inclement weather when required
Ability to obtain a SIDA badge, if applicable
Basic proficiency with computers and standard PC applications
Miscellaneous
About Our Client
Our client is a global leader in aviation, committed to creating cutting-edge aircraft that set the standard for performance, reliability, and innovation. With headquarters in Montreal, Canada, they operate globally, including in the U.S., where they maintain a significant presence. At the Hartford Service Center, the mission is to deliver top-tier maintenance and support for their fleet, ensuring each aircraft operates at peak performance. With a commitment to excellence and a focus on innovation, our client provides unmatched career opportunities for those passionate about aviation.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
137740750174654
Avionics Technician will perform operational tests on aircraft components to determine condition, analyze performance, and isolate malfunctions in the radar, sensors, weapons control, electronic warfare (EW), flight control, and engine control systems.
Essential Duties and Responsibilities
Inspect, service, maintain, troubleshoot, and repair avionics systems that perform communications, navigation, collision avoidance, target acquisition, and automatic flight-control functions.
Excellent knowledge of avionics systems and be able to assist with systems check out and troubleshooting as required.
Must have complete understanding and knowledge of FAA AC 43.13 (acceptable methods), and 91.411/413 RVSM set up and testing a must
Must be able to troubleshoot any avionics system problems and complete a successful repair using experience, equipment manuals, ramp test equipment and breakout boxes with little supervision.
Complete any normal avionics installation task related to the completion of the assignment in the time projected by the supervisor.
Requirements
Minimum of 5 years of current experience performing avionics troubleshooting on General Aviation, Cessna, King Air, Lear, Gulfstream etc.
Must have experience with Garmin, Collins or Bendix King avionics products and be able to work from a wiring diagram and construct a wiring harness and install it into the aircraft with normal supervised instructions.
Have own tools - tools must be shadowed
High School Diploma or equivalent
Miscellaneous
About Our Client
In 1995 our client launched as an aircraft instrument, radio and avionics repair shop to complement their parts distribution company previously founded. In time, the company has become a FAA/EASA Part 145 repair station and grown to serve a variety of general aviation, business, commercial, and government aircraft, including fixed and rotary-winged operators around the world. Today they specialize in three major MRO markets: avionics, aircraft maintenance and component repair and continues to strategically expand.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
187274577420340
The Aircraft Engine Maintenance Technician is responsible for performing inspections, troubleshooting, repairs, and maintenance on aircraft engines and related components. This role involves working on-site and off-site, supporting engine installations, disassemblies, and operational tests while ensuring compliance with regulatory and company standards.
Essential Duties and Responsibilities
Conduct periodic inspections of aircraft engines, including Major Periodic Inspections (MPI) and Hot Section Inspections (HSI) following maintenance manuals.
Diagnose and repair basic engine and aircraft-related issues at various locations.
Assist in complex engine repairs and troubleshooting in collaboration with senior technicians.
Remove, install, and replace engines and accessories.
Disassemble, inspect, and reassemble aircraft engines with precision.
Replace Line Replaceable Units (LRUs) as required.
Support aircraft fueling and defueling operations.
Assist in performing engine operational checks and functional tests.
Operate ground support equipment (GSE), such as power units, tugs, hydraulic mules, and oxygen servicing units.
Work alongside Aviation Maintenance Technicians and Electronic/Avionics Technicians in troubleshooting and repairing aircraft systems.
Perform basic sheet metal and electrical repairs when necessary.
Access and reinstall aircraft components obstructing assigned maintenance tasks.
May act as a Designated Inspector (DI) if qualified by Quality Assurance (QA).
Provide support to team members across different maintenance areas.
Requirements
Airframe & Powerplant (A&P) license is required.
6+ years of experience in aircraft turbine engine maintenance.
Ability to read and interpret engineering documents and repair manuals accurately.
Strong troubleshooting skills with the ability to work independently and in a team.
Familiarity with aircraft maintenance procedures and safety protocols.
Experience working with ground support equipment (GSE) is a plus.
Willingness to travel for on-site and off-site maintenance assignments.
Miscellaneous
About Our Client
Our client is a global leader in aviation, committed to creating cutting-edge aircraft that set the standard for performance, reliability, and innovation. With headquarters in Montreal, Canada, they operate globally, including in the U.S., where they maintain a significant presence. The Wichita, KS, facility is dedicated to producing and maintaining some of the most advanced aircraft in the world, delivering unparalleled quality and service to their clients.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
125181811605253
The Avionics Technician troubleshoot repairs, inspect, modify and service aircraft avionics, electrical and electronic equipment. Perform and document all work performed per appropriate manuals and regulations as required.
Essential Duties and Responsibilities
Adhere to General Work Requirements (Factory, Shop and / or Hangar positions)
Comply with environmental health / safety policies and procedures. Participate in 5-S activities. Perform all assigned tasks in a safe and timely manner
Operate ground support equipment as required
Assist with mechanical / electrical removals and installations
May assist with maintenance at off-site locations
Perform other duties as assigned
Requirements
Min 4+ years of experience as an Avionics Technician
Corporate Jet or commercial aircraft experience preferred
If former military, Depot/Isochronal/Phase inspections are a plus
CRJ airframe experience is a plus
FAA A&P or A license is required.
GROL or AET certification is preferred
Certification from Avionics, Electric A/C Technical school or equivalent military training is preferred
Must have own tools
Must be able to effectively communication in English both verbally and in writing
Must be comfortable with 12hr shift work including days/nights and weekends.
Miscellaneous
About Our Client
For over 130 years our clients innovative and integrated solutions have demonstrated our commitment to creating a positive social impact around the globe. Our range of products and services are tailored to meet our customers’ evolving needs across the commercial aviation, energy, transportation and infrastructure, machinery, defense and space systems sectors.
Our culture embraces diversity and cooperation, and we promote a healthy balance of professional and personal development, ensuring that your ideas and expertise are valued and respected.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
123635740452038
The Sheetmetal Mechanic will troubleshoot, inspect and perform maintenance on customer aircraft sheet metal components, composites and hydraulics. Perform and document all work performed per appropriate manuals and regulations as required.
Essential Duties and Responsibilities
Adhere to clients General Work Requirements
Comply with environmental health / safety policies / procedures, participate in 5-S activities and perform work in a safe and timely manner.
Remove / install aircraft components as required
Fabricate and or modify structural modifications on aircraft parts
Perform minor structural repairs on composite components either attached or detached
Assist in conducting hidden damage inspection of aircraft structures
Assist with complex structural repairs either on or off aircraft
Operate ground support equipment as required
Assist with aircraft component repair
Perform mechanical / electrical removals and installations as required
May assist with maintenance at off-site locations
Assist in wing removal as required
Assist maintenance as required
Inspect confined areas of airframe
Assist in designing, modifying and welding metal fixtures as required
Assist in providing time estimates as required
Fabricate sheet and/or composite components
Requirements
Minimum of 3 years' of structural sheet metal repair and modification experience, or sustained similar experience
Corporate jet aircraft or commercial aircraft experience preferred.
CRJ airframe experience a plus.
MRO experience a plus.
Military aircraft maintenance experience (Depot/Isochronal/Phase inspections) a plus.
FAA Airframe and Powerplant (A&P) or Airframe (A) License is required.
Must possess their own tools.
Ability to effectively communicate in English aircraft maintenance actions both verbally and in writing.
Must be comfortable with 12-hour shift work, which includes days / nights and weekends.
Miscellaneous
About Our Client
For over 130 years our client innovative and integrated solutions have demonstrated our commitment to creating a positive social impact around the globe. Our range of products and services are tailored to meet our customers’ evolving needs across the commercial aviation, energy, transportation and infrastructure, machinery, defense and space systems sectors.
Our culture embraces diversity and cooperation, and we promote a healthy balance of professional and personal development, ensuring that your ideas and expertise are valued and respected.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
191783367346034
Applies basic, and some intermediate technical skills and knowledge to perform various production operations to fabricate, assemble and repair metallic and nonmetallic parts and assemblies for aerospace industry applications.
Essential Duties and Responsibilities
Performs routine developmental learning assignments and applies standard solutions to work situations of a routine or repetitive nature. May perform a variety of routine duties related to the area to which assigned.
Uses hand and power tools such as routers, drill motors, die grinders and other like tools to complete the required operations called out in the work instructions.
Trims parts to fit and files, grinds, deburrs, bevels edges, polishes surfaces and other wise finishes out the material, part or assembly to specifications.
Assembles detail parts into subassemblies and complete assemblies using written and verbal work instructions.
Installs rivets, bolts, screws and clips and prepares and applies adhesives.
Inspects assemblies and installation for conformance to specifications.
Operates production machines and equipment such as hot or cold presses, band saws, and other like production machines to fabricate parts, components and material for production uses.
Reviews production and process documentation and production scheduling and planning and assist in expediting the flow of material, parts and assemblies.
Requirements
High School Diploma or GED
Must be able to use small hand tools and machinery
Previous manufacturing experience preferred.
Miscellaneous
About Our Client
This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
149141947342573
Seeking licensed A&P Mechanic with experience on heavy commercial aircraft in Kansas City, MO
Essential Duties and Responsibilities
General
Has intermediate knowledge of all areas of the aircraft and assigned work area.
Repair, modify, replace or otherwise perform routine aircraft maintenance work in specialized area of aircraft.
Develop repair schemes utilizing SRM or Engineering data
Communicate effectively with other maintenance personnel at all levels by keeping co-workers and
leadership apprised of work progress and difficulties as they arise.
Complete job assignments in a timely manner.
Complete on-the-job-training (OJT) forms and required reading.
Read and interpret manufacturer and airline maintenance manuals, service bulletins, drawings and other
specifications to determine feasibility and method of repair, replacement or modification.
Conduct operational tests.
Help with general clean-up of work area.
Responsible for accurately clocking to jobs.
Regular and prompt attendance.
Effective and appropriate conduct with co-workers.
Perform other duties as assigned.
Flight Controls
Remove and Install flight control surfaces and components
Perform weight and balance including calculation of flight control surfaces
Perform rigging and operational test of all flight control surfaces including autopilot
Troubleshoot flight control systems
Utilize OEM and Engineering drawings to modify structures and flight controls
Repair, replace, and rebuild aircraft structures
Systems:
Remove and replace landing gear, engines and air-conditioning systems
Utilize OEM and Engineering drawings to modify parts
Rig landing and operational test gear systems and engine systems
Trouble shoot landing gear
Requirements
High School Diploma or equivalent.
Airframe and Powerplant License required
Previous Commercial MRO experience – preferred minimum three years of experience
Engine Remove and Reinstallation /Troubleshooting
Pneumatics Troubleshooting
Gear Remove and Reinstallation /Troubleshooting
Rigging
Ops Checks
Remove and Reinstallation FC
Experience on 737-9, 737-8 and A220
Miscellaneous
ENVIRONMENT: • The noise level in this work environment is usually moderate to high. • May occasionally work near moving mechanical parts in high, precarious places and may be exposed to fumes or airborne particles. • This position requires use of a respirator. PHYSICAL EFFORT AND DEXTERITY: • While performing the duties of this job, the employee will be required to sit; use their hands and arms; and talk • or hear; and focus on objects close. • The employee will also be required to stand; walk; and stoop, kneel, crouch, or crawl. The employee may be required to lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. • Ability to handle and climb ladders and aircraft stairs.
About Our Client
This client is headquartered in Everett, Washington, with additional operations in Moses Lake, Washington; Kansas City, Missouri; and Fort Worth, Texas. This national MRO network provides seamless support for military, commercial and regional aircraft operators – including airframe maintenance, component repair, engineering support, fuselage painting, and business jet services.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
778678313800259
We are seeking a skilled Structural Fabricator to support aircraft structural and component fabrication in a backshop environment. This role focuses on precision fabrication, modification, and repair of aircraft structures and components, supporting maintenance and production teams through high-quality workmanship, compliance, and collaboration. The ideal candidate brings hands-on fabrication expertise, corporate aviation exposure, and a strong commitment to safety and quality.
Essential Duties and Responsibilities
Adhere to general work requirements applicable to factory, shop, and hangar environments
Comply with all environmental, health, and safety policies and procedures
Participate in 5S initiatives and maintain a safe, organized work area
Troubleshoot, inspect, repair, and maintain aircraft structural components
Fabricate and modify aircraft structural parts and assemblies
Perform structural repairs on composite components, both attached and detached
Remove and install aircraft components as required
Conduct or assist with inspections for hidden damage on aircraft structures
Support and perform complex structural repairs on or off the aircraft
Document all work in accordance with approved manuals and regulatory requirements
Operate ground support equipment as required
Repair or assist in the repair of aircraft and shop components
Perform mechanical and limited electrical component removals and installations
Inspect confined areas of the airframe
Assist with wing removal and reinstallation activities as needed
Support off-site maintenance activities when required
Design, modify, and weld metal fixtures as needed
Fabricate parts for ground support equipment
Assist with aircraft towing operations
Collaborate effectively with other maintenance and fabrication disciplines
Perform other duties as assigned to support operational needs
Requirements
Minimum 5-8 years of structural fabrication experience (or substantiated equivalent experience)
Minimum 1 year of corporate aircraft experience
Completion of a Sheet Metal Aircraft Technician School or equivalent technical training
Ability to read, interpret, and work from mechanical and engineering drawings
Strong written and verbal communication skills related to task execution and aircraft status
Ownership of a basic set of hand tools, with the ability to demonstrate proper inventory control
Ability to obtain required Ground Support Equipment (GSE) qualifications
Willingness to work unscheduled overtime, including weekends and holidays
Ability to work outdoors in seasonal and inclement weather when required
Ability to obtain a SIDA badge, if applicable
Basic proficiency with computers and standard PC applications
Miscellaneous
About Our Client
Our client is a global leader in aviation, committed to creating cutting-edge aircraft that set the standard for performance, reliability, and innovation. With headquarters in Montreal, Canada, they operate globally, including in the U.S., where they maintain a significant presence. At the Hartford Service Center, the mission is to deliver top-tier maintenance and support for their fleet, ensuring each aircraft operates at peak performance. With a commitment to excellence and a focus on innovation, our client provides unmatched career opportunities for those passionate about aviation.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
781099555627727
