Find the right job for your preferred location and specialty
Jobs Available
1 - 10 of 136 Matches
We are seeking a skilled Structural Fabricator to support aircraft structural and component fabrication in a backshop environment. This role focuses on precision fabrication, modification, and repair of aircraft structures and components, supporting maintenance and production teams through high-quality workmanship, compliance, and collaboration. The ideal candidate brings hands-on fabrication expertise, corporate aviation exposure, and a strong commitment to safety and quality.
Essential Duties and Responsibilities
Adhere to general work requirements applicable to factory, shop, and hangar environments
Comply with all environmental, health, and safety policies and procedures
Participate in 5S initiatives and maintain a safe, organized work area
Troubleshoot, inspect, repair, and maintain aircraft structural components
Fabricate and modify aircraft structural parts and assemblies
Perform structural repairs on composite components, both attached and detached
Remove and install aircraft components as required
Conduct or assist with inspections for hidden damage on aircraft structures
Support and perform complex structural repairs on or off the aircraft
Document all work in accordance with approved manuals and regulatory requirements
Operate ground support equipment as required
Repair or assist in the repair of aircraft and shop components
Perform mechanical and limited electrical component removals and installations
Inspect confined areas of the airframe
Assist with wing removal and reinstallation activities as needed
Support off-site maintenance activities when required
Design, modify, and weld metal fixtures as needed
Fabricate parts for ground support equipment
Assist with aircraft towing operations
Collaborate effectively with other maintenance and fabrication disciplines
Perform other duties as assigned to support operational needs
Requirements
Minimum 4 years of structural fabrication experience (or substantiated equivalent experience)
Minimum 1 year of corporate aircraft experience
Completion of a Sheet Metal Aircraft Technician School or equivalent technical training
Ability to read, interpret, and work from mechanical and engineering drawings
Strong written and verbal communication skills related to task execution and aircraft status
Ownership of a basic set of hand tools, with the ability to demonstrate proper inventory control
Ability to obtain required Ground Support Equipment (GSE) qualifications
Willingness to work unscheduled overtime, including weekends and holidays
Ability to work outdoors in seasonal and inclement weather when required
Ability to obtain a SIDA badge, if applicable
Basic proficiency with computers and standard PC applications
Miscellaneous
About Our Client
Our client is a global leader in aviation, committed to creating cutting-edge aircraft that set the standard for performance, reliability, and innovation. With headquarters in Montreal, Canada, they operate globally, including in the U.S., where they maintain a significant presence. At the Hartford Service Center, the mission is to deliver top-tier maintenance and support for their fleet, ensuring each aircraft operates at peak performance. With a commitment to excellence and a focus on innovation, our client provides unmatched career opportunities for those passionate about aviation.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
137740750174654
APA Services is seeking to hire several QA Inspectors for a long term opportunity at KAPA airport in Englewood, CO.
Essential Duties and Responsibilities
Aircraft records review, work order package processing, and 377 completion
Monitor or audit quality standards for Aviation safety and work performance
Inspect components, assemblies, and all other work functions performed; then issue final checks on finished products
Notify supervisor of any discrepancies and assist in correction
Identify root causes of defects in order to reduce rework and improve quality
Pre and Post flight inspections
Logbook research when required
Requirements
A&P License
IA Preferred
2+ years inspection experience
Familiarity with record tracking systems such as Cescom, Avtrak, CAMPS, SAM track and Flight Docs
general aviation experience required
Working knowledge of aircraft weight and balance
Proficient in Excel
Experience in QA with a 145 certificate
Familiar with RTS process
Miscellaneous
About Our Client
Since 1950, our partner has set the standard for excellence in business aircraft sales, service and management. Its rich history began in Greenville, SC and has expanded to additional locations in Nashville, TN, Dayton, OH, and more.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
156451511298316
Applies basic, and some intermediate technical skills and knowledge to perform various production operations to fabricate, assemble and repair metallic and nonmetallic parts and assemblies for aerospace industry applications.
Essential Duties and Responsibilities
Performs routine developmental learning assignments and applies standard solutions to work situations of a routine or repetitive nature. May perform a variety of routine duties related to the area to which assigned.
Uses hand and power tools such as routers, drill motors, die grinders and other like tools to complete the required operations called out in the work instructions.
Trims parts to fit and files, grinds, deburrs, bevels edges, polishes surfaces and other wise finishes out the material, part or assembly to specifications.
Assembles detail parts into subassemblies and complete assemblies using written and verbal work instructions.
Installs rivets, bolts, screws and clips and prepares and applies adhesives.
Inspects assemblies and installation for conformance to specifications.
Operates production machines and equipment such as hot or cold presses, band saws, and other like production machines to fabricate parts, components and material for production uses.
Reviews production and process documentation and production scheduling and planning and assist in expediting the flow of material, parts and assemblies.
Requirements
High School Diploma or GED
Must be able to use small hand tools and machinery
Previous manufacturing experience preferred.
Miscellaneous
About Our Client
This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
156736088205890
Applies advanced technical skills and knowledge in conducting thermal imaging, radiographic, penetrant, ultrasonic, magnetic particle or other nondestructive tests of nonmetallic or metallic aircraft structural parts and components that are used in operational aircraft applications. Ensures the new or repaired product meets company, customer and FAA specifications and standards.
Essential Duties and Responsibilities
Essential Functions: 1. Performs non-destructive tests (NDT) and determines product acceptability to the authorized limits of the NDT level obtained in accordance with prescribed methods and procedures. 2. Records, organizes and evaluates test results and enter results into applicable documents. 3. Ensures compliance to all radiation safety rules and regulations and provides protection to self and others during testing. 4. Maintains equipment and assures calibration for tests to be performed. 5. Maintains inventory control of area equipment.
Additional Functions: 1. Works with and assists other NDT Technicians as required. 2. Coordinates NDT inspection workload according to priorities, efficiency and cost effectiveness. 3. Provides technical assistance to subordinate level NDT technicians. 4. Performs process control on area inspection equipment. 6. Performs exposure room interlock safety checks, establishes radiation safety barriers, zeros pocket dosimeters, operates radiation survey meters and completes applicable survey logs and forms. 7. Performs automated ultrasonic C-scan inspection of composite parts. 7_2. Must be available to work any shift. Perform other duties as assigned.
Requirements
Level of Supervision Required:
The level of supervision required described here is representative of those that must be met by an employee to successfully perform the essential functions of this job. Works under general supervision. Work is reviewed for completion to quality standards and schedule requirements. May adapt techniques and tools to meet special needs with approval from management.
Special Skills, Licenses or Job Requirements:
Demonstrate competency in applying the following in performing normal job duties.
Miscellaneous
About Our Client
This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
158383825182480
Applies knowledge of basic production procedures to assist other stakeholders and learn the processes to fabricate, rework, and repair metallic and nonmetallic bonded parts and assemblies for operational aircraft applications.
Essential Duties and Responsibilities
Performs routine developmental learning assignments and applies standard solutions to problems or work situations of a routine or repetitive nature. May perform a variety of routine duties related to any work operation in the manufacturing or repair of company and customer products as required.
Assists in performing tasks associated with determining the method and sequences of operation to be followed in fabrication of parts using materials such as graphite, fiberglass, plastic, boron, flock, mat, epoxy resins, rubber and like materials.
Assists in planning, fabricating and building adhesive bonded assemblies of metallic and nonmetallic composite materials.
Fabricates composite and metal parts into subassemblies for the purpose of prefitting in preparation for bonding/curing in presses, ovens, and autoclaves.
Assists in lay out, prefit, and assembly and lay-up of a variety of metal to metal and composite bonded assemblies.
May lay out and mark dimensions and reference lines on material to develop and trace patterns of product or parts, or uses templates.
Performs vacuum bagging for Autoclave cures up to 100 psi.
Learns to read and interpret blueprints, drawings, manuals, specifications sketches, job orders, planning documents and engineering drawings.
Selects tooling and materials compatible with the processing techniques identified in the work instructions.
Ancillary Functions and Responsibilities: Performs other duties as required. These duties may include assignments in job classifications other than the primary assignment.
Requirements
High School Diploma, GED or equivalent.
Previous work experience in a manufacturing environment preferred, but not required.
Must be able to use small hand tools and machinery.
Miscellaneous
About Our Client
This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
163502123330425
Seeking licensed A&P Mechanic with experience on heavy commercial aircraft in Kansas City, MO
Essential Duties and Responsibilities
General
Has intermediate knowledge of all areas of the aircraft and assigned work area.
Repair, modify, replace or otherwise perform routine aircraft maintenance work in specialized area of aircraft.
Develop repair schemes utilizing SRM or Engineering data
Communicate effectively with other maintenance personnel at all levels by keeping co-workers and
leadership apprised of work progress and difficulties as they arise.
Complete job assignments in a timely manner.
Complete on-the-job-training (OJT) forms and required reading.
Read and interpret manufacturer and airline maintenance manuals, service bulletins, drawings and other
specifications to determine feasibility and method of repair, replacement or modification.
Conduct operational tests.
Help with general clean-up of work area.
Responsible for accurately clocking to jobs.
Regular and prompt attendance.
Effective and appropriate conduct with co-workers.
Perform other duties as assigned.
Flight Controls
Remove and Install flight control surfaces and components
Perform weight and balance including calculation of flight control surfaces
Perform rigging and operational test of all flight control surfaces including autopilot
Troubleshoot flight control systems
Utilize OEM and Engineering drawings to modify structures and flight controls
Repair, replace, and rebuild aircraft structures
Systems:
Remove and replace landing gear, engines and air-conditioning systems
Utilize OEM and Engineering drawings to modify parts
Rig landing and operational test gear systems and engine systems
Trouble shoot landing gear
Requirements
High School Diploma or equivalent.
Airframe and Powerplant License required
Previous Commercial MRO experience – preferred minimum three years of experience
Engine Remove and Reinstallation /Troubleshooting
Pneumatics Troubleshooting
Gear Remove and Reinstallation /Troubleshooting
Rigging
Ops Checks
Remove and Reinstallation FC
Experience on 737-9, 737-8 and A220
Miscellaneous
ENVIRONMENT: • The noise level in this work environment is usually moderate to high. • May occasionally work near moving mechanical parts in high, precarious places and may be exposed to fumes or airborne particles. • This position requires use of a respirator. PHYSICAL EFFORT AND DEXTERITY: • While performing the duties of this job, the employee will be required to sit; use their hands and arms; and talk • or hear; and focus on objects close. • The employee will also be required to stand; walk; and stoop, kneel, crouch, or crawl. The employee may be required to lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. • Ability to handle and climb ladders and aircraft stairs.
About Our Client
This client is headquartered in Everett, Washington, with additional operations in Moses Lake, Washington; Kansas City, Missouri; and Fort Worth, Texas. This national MRO network provides seamless support for military, commercial and regional aircraft operators – including airframe maintenance, component repair, engineering support, fuselage painting, and business jet services.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
778678313800259
We are seeking a skilled Structural Fabricator to support aircraft structural and component fabrication in a backshop environment. This role focuses on precision fabrication, modification, and repair of aircraft structures and components, supporting maintenance and production teams through high-quality workmanship, compliance, and collaboration. The ideal candidate brings hands-on fabrication expertise, corporate aviation exposure, and a strong commitment to safety and quality.
Essential Duties and Responsibilities
Adhere to general work requirements applicable to factory, shop, and hangar environments
Comply with all environmental, health, and safety policies and procedures
Participate in 5S initiatives and maintain a safe, organized work area
Troubleshoot, inspect, repair, and maintain aircraft structural components
Fabricate and modify aircraft structural parts and assemblies
Perform structural repairs on composite components, both attached and detached
Remove and install aircraft components as required
Conduct or assist with inspections for hidden damage on aircraft structures
Support and perform complex structural repairs on or off the aircraft
Document all work in accordance with approved manuals and regulatory requirements
Operate ground support equipment as required
Repair or assist in the repair of aircraft and shop components
Perform mechanical and limited electrical component removals and installations
Inspect confined areas of the airframe
Assist with wing removal and reinstallation activities as needed
Support off-site maintenance activities when required
Design, modify, and weld metal fixtures as needed
Fabricate parts for ground support equipment
Assist with aircraft towing operations
Collaborate effectively with other maintenance and fabrication disciplines
Perform other duties as assigned to support operational needs
Requirements
Minimum 5-8 years of structural fabrication experience (or substantiated equivalent experience)
Minimum 1 year of corporate aircraft experience
Completion of a Sheet Metal Aircraft Technician School or equivalent technical training
Ability to read, interpret, and work from mechanical and engineering drawings
Strong written and verbal communication skills related to task execution and aircraft status
Ownership of a basic set of hand tools, with the ability to demonstrate proper inventory control
Ability to obtain required Ground Support Equipment (GSE) qualifications
Willingness to work unscheduled overtime, including weekends and holidays
Ability to work outdoors in seasonal and inclement weather when required
Ability to obtain a SIDA badge, if applicable
Basic proficiency with computers and standard PC applications
Miscellaneous
About Our Client
Our client is a global leader in aviation, committed to creating cutting-edge aircraft that set the standard for performance, reliability, and innovation. With headquarters in Montreal, Canada, they operate globally, including in the U.S., where they maintain a significant presence. At the Hartford Service Center, the mission is to deliver top-tier maintenance and support for their fleet, ensuring each aircraft operates at peak performance. With a commitment to excellence and a focus on innovation, our client provides unmatched career opportunities for those passionate about aviation.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
781099555627727
The Aircraft Engine Maintenance Technician is responsible for performing inspections, troubleshooting, repairs, and maintenance on aircraft engines and related components. This role involves working on-site and off-site, supporting engine installations, disassemblies, and operational tests while ensuring compliance with regulatory and company standards.
Essential Duties and Responsibilities
Conduct periodic inspections of aircraft engines, including Major Periodic Inspections (MPI) and Hot Section Inspections (HSI) following maintenance manuals.
Diagnose and repair basic engine and aircraft-related issues at various locations.
Assist in complex engine repairs and troubleshooting in collaboration with senior technicians.
Remove, install, and replace engines and accessories.
Disassemble, inspect, and reassemble aircraft engines with precision.
Replace Line Replaceable Units (LRUs) as required.
Support aircraft fueling and defueling operations.
Assist in performing engine operational checks and functional tests.
Operate ground support equipment (GSE), such as power units, tugs, hydraulic mules, and oxygen servicing units.
Work alongside Aviation Maintenance Technicians and Electronic/Avionics Technicians in troubleshooting and repairing aircraft systems.
Perform basic sheet metal and electrical repairs when necessary.
Access and reinstall aircraft components obstructing assigned maintenance tasks.
May act as a Designated Inspector (DI) if qualified by Quality Assurance (QA).
Provide support to team members across different maintenance areas.
Requirements
Airframe & Powerplant (A&P) license is required.
4+ years of experience in aircraft turbine engine maintenance.
Ability to read and interpret engineering documents and repair manuals accurately.
Strong troubleshooting skills with the ability to work independently and in a team.
Familiarity with aircraft maintenance procedures and safety protocols.
Experience working with ground support equipment (GSE) is a plus.
Willingness to travel for on-site and off-site maintenance assignments.
Miscellaneous
About Our Client
Our client is a global leader in aviation, committed to creating cutting-edge aircraft that set the standard for performance, reliability, and innovation. With headquarters in Montreal, Canada, they operate globally, including in the U.S., where they maintain a significant presence. The Wichita, KS, facility is dedicated to producing and maintaining some of the most advanced aircraft in the world, delivering unparalleled quality and service to their clients.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
167330506687422
The Sheet Metal Mechanic Assistant is responsible for assembling and/or repairing of aircraft parts, components, subsystems and operating systems.
Essential Duties and Responsibilities
Reads work instructions including production planning, engineering drawings, full size Mylar layouts, process specifications and other technical documentation to insure proper detail configuration.
Determines dimensions to layout holes patterns, install clips, brackets, nut plates and like items.
Lays out and marks dimensions and reference lines on material with or without templates or shop aides to develop or back drill hole patterns on composite, sheet metal and mechanical parts.
Trims sheet metal and composite parts to fit and files, grinds, deburrs, buffs, and smooths surfaces.
Installs assemblies in assembly jigs, fixtures or other tooling according to work instructions.
Assembles parts into subassemblies and final assemblies using basic hand tools such as, drill motors, die grinders, sanders, polishers, rivet shavers and other like tools.
Drills holes of varying sizes in detail parts and subassemblies according to work instructions.
Installs blind rivets, Jo-Bolts, hilocks, huck bolts, solid rivets and bolts, drives and bucks rivets to attach and assemble detail parts to structural parts and complete subassemblies to written and verbal work instructions.
Inspects completed assemblies for conformance to specifications.
Completes and maintains necessary paperwork for documenting processes performed.
Requirements
High School Diploma or GED
Two (2) or more years of major aircraft structural assembly.
Miscellaneous:
Must provide own tools
Miscellaneous
About Our Client
This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
785429413880702
Applies basic, and some intermediate technical skills and knowledge to perform various production operations to fabricate, assemble and repair metallic and nonmetallic parts and assemblies for aerospace industry applications.
Essential Duties and Responsibilities
Performs routine developmental learning assignments and applies standard solutions to work situations of a routine or repetitive nature. May perform a variety of routine duties related to the area to which assigned.
Uses hand and power tools such as routers, drill motors, die grinders and other like tools to complete the required operations called out in the work instructions.
Trims parts to fit and files, grinds, deburrs, bevels edges, polishes surfaces and other wise finishes out the material, part or assembly to specifications.
Assembles detail parts into subassemblies and complete assemblies using written and verbal work instructions.
Installs rivets, bolts, screws and clips and prepares and applies adhesives.
Inspects assemblies and installation for conformance to specifications.
Operates production machines and equipment such as hot or cold presses, band saws, and other like production machines to fabricate parts, components and material for production uses.
Reviews production and process documentation and production scheduling and planning and assist in expediting the flow of material, parts and assemblies.
Requirements
High School Diploma or GED
Must be able to use small hand tools and machinery
Previous manufacturing experience preferred.
Miscellaneous
About Our Client
This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
128611071291393
