Find the right job for your preferred location and specialty
Jobs Available
61 - 70 of 140 Matches
A Composite Technician will remove, replace, repair, build or duplicate various aircraft components within a shop environment requiring composite repair or replacement on fiberglass, honeycomb and metal bonding with the use of special tooling and equipment.
Essential Duties and Responsibilities
Mix various resins to S.R.M. specifications.
Cut and mold various fiberglass clothes and apply based on S.R.M. specifications.
Layout and fabricate all sheetmetal fillers and doublers for composite purposes with basic sheetmetal skills using various hand tools and or Sheetmetal Fab Shop equipment.
Treat and prepare sheetmetal (alodine and prime) for bonding purposes.
Perform the duties of and provide necessary training for lower skill levels.
Maintain and store various tools and supplies in a serviceable condition.
Adhere to safe maintenance practices and keep a clean work area.
Maintain and supply personal records of work performed on OJT forms for the Training Department.
Successfully complete any courses deemed necessary by the training department.
Perform any work that may be assigned by his or her supervisor
Requirements
1 years recent composite experience
Prior experience on Boeing 727/737/747/757/767/777, Airbus 319/320/330
Knowledge of detection and removal procedures for foreign contaminants such as moisture, hydraulic fluid, etc, from aluminum or nomex honeycomb core.
Fiberglass/carbon graphite pre-preg repairs with core replacement using proper apply orientation procedures.
Ability to use on site hot bond machines
Proficient in vacuum bagging processes for hot bond repairs to include caul plate usage to maintain complex curvature of parts during repairs.
Basic knowledge of composite hybrid materials and usage.
Ability & willingness to assist, guide and train others in performing aircraft composite maintenance.
Knowledge of IPC & ability to order parts & determine effectively with no assistance.
Familiarity with and ability to perform work per CMM’s, OHM’s, etc.
Attentiveness & knowledge of aircraft schedule / assigned job budget.
Familiarity with procedures required to properly submit requests to Engineering for assistance.
Must have minimum required tools
High school diploma or general education degree (GED) required
Miscellaneous
Candidates must report on first day with 2 forms of acceptable identification to verify employment eligibility. Applicants should plan on one week of orientation/training upon arrival APA offers on site representation Food trucks available daily onsite
About Our Client
Our Client is located at Brookley Aeroplex in Mobile, Alabama, and Pensacola, FL, at the Pensacola International Airport. They are a renowned provider of aircraft maintenance and modification (AMM) services for commercial airlines and air freight operators. They meet their customers' requirements by providing a full spectrum of high-quality, reliable, and timely AMM and engineering solutions. Our client has the know-how and experience to comprehensively manage complex projects, ensuring the customers' aircraft operate safely and efficiently.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
115868303113774
Applies knowledge of basic production procedures to assist other stakeholders and learn the processes to fabricate, rework, and repair metallic and nonmetallic bonded parts and assemblies for operational aircraft applications.
Essential Duties and Responsibilities
Performs routine developmental learning assignments and applies standard solutions to problems or work situations of a routine or repetitive nature. May perform a variety of routine duties related to any work operation in the manufacturing or repair of company and customer products as required.
Assists in performing tasks associated with determining the method and sequences of operation to be followed in fabrication of parts using materials such as graphite, fiberglass, plastic, boron, flock, mat, epoxy resins, rubber and like materials.
Assists in planning, fabricating and building adhesive bonded assemblies of metallic and nonmetallic composite materials.
Fabricates composite and metal parts into subassemblies for the purpose of prefitting in preparation for bonding/curing in presses, ovens, and autoclaves.
Assists in lay out, prefit, and assembly and lay-up of a variety of metal to metal and composite bonded assemblies.
May lay out and mark dimensions and reference lines on material to develop and trace patterns of product or parts, or uses templates.
Performs vacuum bagging for Autoclave cures up to 100 psi.
Learns to read and interpret blueprints, drawings, manuals, specifications sketches, job orders, planning documents and engineering drawings.
Selects tooling and materials compatible with the processing techniques identified in the work instructions.
Ancillary Functions and Responsibilities: Performs other duties as required. These duties may include assignments in job classifications other than the primary assignment.
Requirements
High School Diploma, GED or equivalent.
Previous work experience in a manufacturing environment preferred, but not required.
Must be able to use small hand tools and machinery.
Miscellaneous
About Our Client
This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
909605404595290
A&P Mechanic will be responsible for performing inspections, scheduled and unscheduled maintenance and troubleshoot discrepancies on rotorcraft.
Essential Duties and Responsibilities
Familiar with using test equipment for track and balance. Theory of rotor system tracking and balancing for adjustments.
Interpreting Airworthiness Directives and Alert Service Bulletins for application on helicopters.
Familiar with using measuring instruments such as dial calipers, micrometers, tensiometers, dial bore gauges, feeler gauges, and borescopes.
Adjustments and troubleshooting of engine parameters for oil pressure, Ng, temperature indication, and topping settings.
Familiar with common hand tools for applying torque to fasteners.
Keeping detailed records of all repairs and work performed on the aircraft in accordance with the repair station guidelines.
Inspect and repair aircraft according to strict safety guidelines set by the Federal Aviation Administration (FAA) or applicable regulatory body.
Perform routine maintenance checks and perform diagnostic tests to identify hydraulic and mechanical malfunctions.
Consult maintenance blueprints, manuals, and other documents to assist with troubleshooting and repairs.
Inventory aircraft parts, supplies, and equipment, and keep detailed records of inspections, repairs, and other maintenance operations.
Complete tasks within allotted time frames and to FAA (or equivalent) and company standards
Collaborate with other mechanics and engineers to perform repairs and ensure aircraft are operating smoothly.
Requirements
Minimum of 3 years A&P experience working on helicopters with at least 2 years on any of the following designated helicopters, Airbus/Eurocopter AS350, EC130, EC135, EC145, Agusta 109, 119, 139, Bell 206, 407, 429, 412, 505, MD500, and/or Sikorsky S76.
A&P License required
Flight line experience to include track and balance
Must have own tools
Must have a basic knowledge of Aircraft Maintenance Manuals, FAA documentation
High School Diploma or equivalent
Ability to use hand tools, power tools, and welding equipment.
Working knowledge of blueprint reading, geometry, and trigonometry
IA Preferred
Any OEM school training within the last 4 years preferred
Miscellaneous
Skills: Analytical mind with a penchant for troubleshooting. Excellent math and computer skills. Detail-oriented with a passion for mechanics. Manual dexterity and physical strength. Extensive experience with power and hand tools, and knowledge of aircraft systems, mechanics, and parts. Ability to make consistent and precise repairs under pressure.
About Our Client
Our client is a dynamic integrated helicopter services organization, and a “recognized leader” in the aerospace/aviation industry.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
146680891363998
Inspect parts and components to known standards to insure conformity of products including cosmetic acceptability. Conducts interior shell component and in-process inspections. Verifies parts and components conform to approved data. Properly document all inspections and verifications.
Essential Duties and Responsibilities
Interpret data, CATIA models, company standards, work instructions, and perform necessary calculations using shop math to conform detail parts, tooling, assemblies and installations and document results.
Perform complete inspection of components, major assemblies, sub-assemblies, production tools or parts during manufacturing, modifications, repairs & installations to determine safety or conformity to approved data & company standards & specifications. Properly documents findings and actions taken.
Interpret and verify per complex data, engineering change orders and governmental regulatory procedures and specifications and properly document results.
Apply technical knowledge in the fields of manufacturing and assembly, plumbing, electrical, etc. to determine conformity, approval for return to service, & airworthiness.
Use precision measuring guides, gauges and laboratory type instruments.
Suggest dispositions of damaged or worn parts and the possibility of salvage based on company practices or procedures.
Be familiar with relative FAA/EASA regulations and requirements.
Be familiar with regulatory processes.
Prepare necessary customer and/or company documents.
Complete and maintain reports and records as required.
Assist other personnel on specific job assignments as requested by Quality Management.
Maintain a clean and organized work area.
Complete tasks accurately and thoroughly.
May perform inspections of incoming purchased parts and products.
May perform inspections of out going parts and products being shipped from DFJC.
Work in a safe manner in accordance with OSHA and company safety regulations/procedures.
Requirements
High school diploma or equivalent.
Two (2) years experience in an aircraft or aeronautical environment.
Must possess above average verbal, written skills and interpersonal communication skills.
Must possess well-developed critical thinking, logic and analytical skills.
Able to work from heights or small-enclosed areas for short periods with or without reasonable accommodation.
Able to climb, stoop, bend, kneel, and/or work from unleveled surfaces with or without reasonable accommodation.
Ability to read and interpret complex drawings, 3D models and specifications.
Able to use precision measuring tools, gauges and laboratory type instruments.
Must possess computer literacy with the ability to learn new applications.
Must be pro-active and team oriented.
Pass vision testing, minimum 20/20 corrected, and with no limitations in color perception.
Preferred - Regulatory issued Airframe & Powerplant (A & P) license.
Preferred - Able to work unsupervised for short periods.
Preferred - Aircraft/aviation experience specific to the area of assignment (e.g., upholstery, cabinet, etc.)
Miscellaneous
WORKING CONDITIONS:Normal working conditions would be in a controlled environment. However, candidate could be required to work for short periods of time in an uncontrolled environment. (Outside)
About Our Client
Our partner is a French aerospace company with proven dual expertise as a manufacturer of both military aircraft and business jets. They are a pioneer in the use of CATIA™, the 3D CAD / CAM system that has become a global standard. They are a creator of more than 100 prototypes in the last century, with over 10,000 aircraft delivered to 90 countries.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
204917605640338
Fabricate, develop, build, sew, and cover aircraft soft goods through the knowledge and skills of aircraft upholstery via Dassault Falcon Jet standards while using 3D models, drawings, blueprints, IDEI drawings, and/or spec control prints following Dassault Quality standards. Soft goods include crew seats, passenger seats, divans, side ledges, headliners and other assorted interior soft goods.
Essential Duties and Responsibilities
Interpret blueprints, completion drawings, company standards, work instructions, 3D model information.
Perform proper maintenance practices in accordance to DFJ FPS, “F” standards and Quality standards, such as proper glue application, adhesive bonding, and hardware.
Correct handling and use of all required tools specific to the current job assignment.
Correct handling and use of all required chemicals and adhesives related to the current job assignment, including general knowledge and ability on retrieving data from the MSDS safety books.
Position will primarily have one area of focus: Seat Covering
Disassemble and reassemble vendor passenger seats and divans in accordance with the guidelines of the vendor component maintenance manuals, and other seat and divan vendors.
Requirements
High school diploma or equivalent
Experience in Upholstery, Sewing, or related.
Able to align intricate or elaborate designs in fabrics.
Must not be allergic to chemical, solvents, paints, adhesives, natural or manmade materials, fabrics, or feathers.
Basic computer skills.
Able to work in confined spaces and in unusual positions.
Able to lift and transport up to 40 lbs. with or without reasonable accommodation
Visual capacity and muscular dexterity to work on fine detail, high cost products with a minimum of errors and rework.
Able to stock and remove materials from bins above storage level according to OSHA standards.
Preferred - Aircraft upholstery fabrication experience
Preferred - Ability to solve practical problems when needed.
Preferred - Able to interpret a variety of instructions furnished in written, oral, or diagram form.
Preferred - Manufacturing, vocational, tech school training, and/or related college credits.
Preferred - Computer and/or software training or experience.
Preferred - Able to work from documentation such as MES, FPS, WI, blueprints, drawings, F-standards, preparation packages, etc.
Preferred - Courses in state or federal vocational technical upholstery programs
Miscellaneous
WORKING CONDITIONS: Factory/manufacturing environment subject to high noise levels, adhesive or chemical odors, dust, and normal climate control.
About Our Client
Our partner is a French aerospace company with proven dual expertise as a manufacturer of both military aircraft and business jets. They are a pioneer in the use of CATIA™, the 3D CAD / CAM system that has become a global standard. They are a creator of more than 100 prototypes in the last century, with over 10,000 aircraft delivered to 90 countries.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
338965189232897
As an Electric Shop Technician, your primary responsibility is troubleshooting and repairing commercial aircraft electrical components. This role involves utilizing various tools, equipment, and precision tooling to maintain and enhance the functionality of electrical systems. Additionally, you will be required to read and interpret electrical wiring schematics and solder electronic devices and perform troubleshooting and repairs on various electro-mechanical systems.
Essential Duties and Responsibilities
Utilize various equipment and precision tooling related to electrical actuation (e.g., Multimeters, oscilloscopes, dynamometers, load cells).
Read and interpret electrical wiring schematics.
Solder various electronic devices.
Troubleshoot, repair, and build wire bundles, including fiber optics, electrical connectors, and removal/installation of connector pins.
Repair and troubleshoot linear, rotary, and pneumatic electro-mechanical actuation systems.
Install seals, O-rings, back-up rings, bearings, and bushings.
Inspect and verify conformance of finished work pieces to OEM specifications before release.
Perform any additional duties as assigned.
Requirements
Minimum two years of related commercial/military aircraft maintenance experience.
Airframe or Airframe and Powerplant License preferred.
Miscellaneous
While performing the duties of this job, the employee will be required to sit; use their hands and arms; and talk or hear; and focus on objects close up. The employee will also be required to stand; walk; and stoop, kneel, crouch, or crawl. The employee will be required to lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds.
About Our Client
Headquartered in Everett, Washington, with additional operations in Moses Lake, Washington; Kansas City, Missouri; and Fort Worth, Texas. This national MRO network provides seamless support for military, commercial and regional aircraft operators – including airframe maintenance, component repair, engineering support, fuselage painting, and business jet services.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
113820767832646
The A&P Mechanic will be performing scheduled and unscheduled maintenance on helicopters.
Essential Duties and Responsibilities
Perform aircraft disassembly and reassembly.
Performing major and minor repairs and alterations to aircraft structure, including sheet metal and composite repairs and fabrications.
Perform post maintenance flight test duties.
Fabrication of mounting provisions for avionics installations.
Other tasks as assigned.
Requirements
3 years of heavy helicopter maintenance experience on Bell helicopters, preferably in FAA 145 Repair Station.
A&P certificate
Must purchase or own tools required for the jobs assigned.
Ability to install kits on new aircraft (to include air conditioners, sliding doors, rescue hoists, FAST rope systems, etc.).
Ability to perform maintenance on airframe and engine as needed, to include removal and replacement of engine and major airframe components.
Ability to perform sheet metal repairs and to fabricate sheet metal and composite parts as required. Ability to troubleshoot and solve routine problems as needed.
Ability to work under limited supervision, and to assist and train junior mechanics as required.
Ability to read and understand installation instructions, maintenance manuals and blueprints.
Ability to follow written and verbal instructions.
Ability to measure, drill and modify aircraft structures without causing damage to structure or underlying components.
Must work as a team member to ensure quality and timely completions of aircraft to meet schedule.
Must work overtime as required.
Ability to sit, stand, crawl, climb ladders, and work in tight spaces as required.
Ability to stand as required for duration of shift. Able to lift 25 lbs.
Miscellaneous
About Our Client
Headquartered in Fort Worth, Texas –Our Rotary wing client has strategic locations around the globe. Their talented employees come from over 90 countries to serve customers from 120. All to deliver exceptional aircraft experiences. Efficiently. Reliably. And, above all, safely.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
209608039072810
Applies basic, and some intermediate technical skills and knowledge to perform various production operations to fabricate, assemble and repair metallic and nonmetallic parts and assemblies for aerospace industry applications.
Essential Duties and Responsibilities
Performs routine developmental learning assignments and applies standard solutions to work situations of a routine or repetitive nature. May perform a variety of routine duties related to the area to which assigned.
Uses hand and power tools such as routers, drill motors, die grinders and other like tools to complete the required operations called out in the work instructions.
Trims parts to fit and files, grinds, deburrs, bevels edges, polishes surfaces and other wise finishes out the material, part or assembly to specifications.
Assembles detail parts into subassemblies and complete assemblies using written and verbal work instructions.
Installs rivets, bolts, screws and clips and prepares and applies adhesives.
Inspects assemblies and installation for conformance to specifications.
Operates production machines and equipment such as hot or cold presses, band saws, and other like production machines to fabricate parts, components and material for production uses.
Reviews production and process documentation and production scheduling and planning and assist in expediting the flow of material, parts and assemblies.
Requirements
High School Diploma or GED
Must be able to use small hand tools and machinery
Previous manufacturing experience preferred.
Miscellaneous
About Our Client
This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
367331409633753
Our client is seeking to hire turn-key licensed master mechanics for a brand new project at their location in Everett, WA
Essential Duties and Responsibilities
Locate and mark dimensions, layout patterns, and templates, fabricate parts, repair or replace heavy structure aircraft components.
Read and interpret manufacturer and airline maintenance manuals, service bulletins, engineering authorizations, structural repair manuals, drawings and other specifications to determine feasibility and method of repair, replacement or modification
Provide accurate documentation on customer paperwork per FAA requirements.
Communicate effectively with other maintenance personnel at all levels by keeping co-workers and leadership apprised of work progress and difficulties as they arise.
Follow safety program including hazmat tool control and foreign object damage (FOD)
Conduct operational tests.
Help with general clean-up of work area.
Maintain regular and prompt attendance
Perform other duties as assigned.
Requirements
A&P License preferred
Must be able to execute the most complex Structure Repairs by reviewing SRMs
and engineering drawings.
• Floor beams, seat tracks, 540 stringer repairs, 663 pressure deck, Cargo Bay
repairs.
• Skin repairs & skin replacements.
• Able to identify flag notes in engineering drawings – interpret Advanced
Drawing Change Notices (ADCN).
• Mentor/ guide small crew of lower-level non-licensed mechanics and sign on
their repairs
Miscellaneous
About Our Client
Headquartered in Everett, Washington, with additional operations in Moses Lake, Washington; Kansas City, Missouri; and Fort Worth, Texas. This national MRO network provides seamless support for military, commercial and regional aircraft operators – including airframe maintenance, component repair, engineering support, fuselage painting, and business jet services.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
690128088793940
We are seeking an experienced Quality Inspector to oversee the return-to-service process and ensure compliance with regulatory requirements. This role involves inspecting aircraft, engines, parts, components, and tools, documenting maintenance actions, and verifying corrective actions. The inspector will also assist with customer support and perform walk-around inspections when necessary.
Essential Duties and Responsibilities
Approve aircraft for return to service in accordance with applicable regulations.
Inspect aircraft, engines, parts, and components to ensure compliance with regulatory standards.
Verify corrective actions performed by Aircraft Maintenance Technicians.
Document maintenance actions, ensuring accuracy in work orders, forms, and customer-specific documentation.
Research aircraft drawings and technical data as required.
Assist customers and perform other tasks as needed.
Requirements
8+ years of aircraft maintenance experience, with at least 1 year of corporate/commercial jet experience.
Ability to read and interpret engineering documents and maintenance manuals.
Airframe & Powerplant (A&P) Certificate.
Proficiency in reading, writing, and understanding English.
Miscellaneous
About Our Client
Our client is a global leader in aviation, committed to creating cutting-edge aircraft that set the standard for performance, reliability, and innovation. With headquarters in Montreal, Canada, they operate globally, including in the U.S., where they maintain a significant presence. The Wichita, KS, facility is dedicated to producing and maintaining some of the most advanced aircraft in the world, delivering unparalleled quality and service to their clients.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
419102344917098
