Find the right job for your preferred location and specialty
Jobs Available
31 - 40 of 133 Matches
An Aircraft Inspector will conduct all required inspections in accordance with the applicable Federal Aviation Regulations, manufacturer’s approved data, any customer’s approved program data.
Essential Duties and Responsibilities
Record the results of all inspections performed on the proper inspection forms used by the repair station in accordance with this Inspection Procedures Manual.
Be thoroughly familiar with the applicable Federal Aviation Regulations, specifications, tolerances, limits, inspection methods, techniques, and equipment used in their area of responsibility to determine the quality of the work performed and the airworthiness of the article.
Maintain proficiency with various types of inspection aides used for the inspection of a particular item.
Conduct all required inspections in accordance with the applicable Federal Aviation Regulations, manufacturer’s approved data, any customer’s approved program data, and the policies and procedures contained in this Inspection Procedures Manual.
Ensure current specifications involving inspection tolerances, limits, and procedures recommended by the manufacturer of the product undergoing inspection and other forms of applicable inspection information are available for reference. Other examples of inspection information would be FAA Airworthiness Directives, manufacturer’s bulletins, approved customer data, and Federal Aviation Regulations.
Make final airworthiness determination prior to “Return of Service” on items they are authorized to inspect for any article maintained or altered by this repair station.
Reject any work or parts that have not been properly maintained or altered in accordance with Federal Aviation Regulations, manufacturer’s approved data, customer approved data and the policies and procedures contained within this manual.
Support the company Safety Program
Requirements
Minimum of three (3) years of heavy aircraft maintenance experience OR equivalent combination of education and experience on 737/767/Airbus/Next Gen
GEN FAM – 737, NextGen, A320 - PREFERRED
Active A&P License
Must have own tools
Miscellaneous
Must report with two forms of employment eligibility identification
About Our Client
Headquartered in Everett, Washington, with additional operations in Moses Lake, Washington; Kansas City, Missouri; and Fort Worth, Texas. This national MRO network provides seamless support for military, commercial and regional aircraft operators – including airframe maintenance, component repair, engineering support, fuselage painting, and business jet services.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
984465724624370
Our client is seeking a Senior Aircraft Mechanic to support heavy maintenance operations on commercial aircraft. This position requires prior A320 family experience, a valid A&P license, and strong technical capabilities. You’ll play a key role in maintaining safety, quality, and compliance standards.
Essential Duties and Responsibilities
Perform routine and non-routine maintenance on A320 family aircraft in accordance with FAA and company regulations
Troubleshoot and repair aircraft systems and structures
Complete inspections, document findings, and ensure all work meets airworthiness standards
Support modification, repair, and overhaul projects
Mentor junior technicians and contribute to team workflow
Complete accurate paperwork, job cards, and inspection reports
Requirements
Minimum of 3 years of commercial aircraft maintenance experience
Minimum of 40-hour Gen Fam on the A320 family
Ability to pass a 20-year background check and obtain a SIDA badge
Must be able to read, write, and speak English (English comprehension test required during indoctrination)
No tools required
Miscellaneous
About Our Client
Our client is a globally recognized leader in aircraft maintenance, repair, and overhaul, supporting airlines and aviation partners across the world. Their Puerto Rico facility, located in Aguadilla, is a key hub specializing in narrow-body aircraft—primarily the Airbus A320 family. This state-of-the-art operation combines advanced technology with a skilled workforce to deliver top-tier MRO services. The site plays a vital role in ensuring operational readiness and safety for major commercial carriers. Employees enjoy a clean, high-tech work environment, ongoing training opportunities, and the chance to grow with an industry innovator. With a strong focus on quality and precision, our client continues to raise the bar in aviation maintenance.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
165354663044339
Applies a mastery of technical skills and knowledge and a detailed knowledge of industry standards and government regulations related to applying and ensuring quality of final paint application on original equipment manufactured parts, components and complete subsystems for operational aircraft applications.
Essential Duties and Responsibilities
Performs assembly of original equipment manufacturing of parts, components and subsystems for aircraft applications using products and processes are varied but generally not complex in scope to apply primer, topcoat paint, and any spray-applied coatings to aircraft parts consistent with government, customer and company standards. The level of work performed requires some skill and experience. Priorities are determined by management.
Reads and interprets specifications and documents to define the scope of work on work orders.
Cleans grease and dirt from product. Removes rust from metal with acid, wire brush, or steel wool. Applies masking tape over parts and areas that are not to be coated. Fills cavities and dents with putty to attain smooth surface.
Computes mix ratios in order to mix paint materials. Selects and mixes coating liquid to produce desired color. Pours coating liquid into spray container and connects gun to air hose. Turns sprayer valves and nozzle to regulate width and pressure of spray.
Selects the appropriate personal protective equipment for the operation to be performed. When using a respirator ensures the respirator is working properly and is properly worn.
Applies spray onto work surface to apply prime or finish using protective or decorative material such as paint, enamel, glaze, gel-coat, or lacquer. Coats areas inaccessible to hand sprayer with brush. Heats and sprays wax onto products after they are tested. Cleans spraying equipment and brushes with solvent.
Ensures compliance with environment regulations and maintains records in accordance with these environment regulations.
Requirements
7-10 Years (Aircraft Painting Experience)
Will take a mixture of Aircraft experience and Auto Experience
Miscellaneous
About Our Client
This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
152875193855599
Our client is seeking a Senior A&P Mechanic to support heavy maintenance operations on commercial aircraft. This position requires prior A320 family experience, a valid A&P license, and strong technical capabilities. You’ll play a key role in maintaining safety, quality, and compliance standards.
Essential Duties and Responsibilities
Perform routine and non-routine maintenance on A320 family aircraft in accordance with FAA and company regulations
Troubleshoot and repair aircraft systems and structures
Complete inspections, document findings, and ensure all work meets airworthiness standards
Support modification, repair, and overhaul projects
Mentor junior technicians and contribute to team workflow
Complete accurate paperwork, job cards, and inspection reports
Requirements
Valid FAA Airframe & Powerplant (A&P) license
Minimum of 3 years of commercial aircraft maintenance experience
Minimum of 40-hour Gen Fam on the A320 family
Ability to pass a 20-year background check and obtain a SIDA badge
Must be able to read, write, and speak English (English comprehension test required during indoctrination)
No tools required
Miscellaneous
About Our Client
Our client is a globally recognized leader in aircraft maintenance, repair, and overhaul, supporting airlines and aviation partners across the world. Their Puerto Rico facility, located in Aguadilla, is a key hub specializing in narrow-body aircraft—primarily the Airbus A320 family. This state-of-the-art operation combines advanced technology with a skilled workforce to deliver top-tier MRO services. The site plays a vital role in ensuring operational readiness and safety for major commercial carriers. Employees enjoy a clean, high-tech work environment, ongoing training opportunities, and the chance to grow with an industry innovator. With a strong focus on quality and precision, our client continues to raise the bar in aviation maintenance.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
996711498736058
Aircraft Painter, With limited supervision apply skills to assist in all phases of aircraft painting as assigned, participating in masking, stripping, sanding and preparing aircraft for paint.
Essential Duties and Responsibilities
Masking aircraft for stripper application.
Applying, agitating and washing stripper off of aircraft.
Hand cleaning and sanding in preparation for etch and alodine.
Applying etch and alodine to aircraft and rinsing.
Removing and reapplying seam seal as required.
Masking and preparing aircraft for primer application.
Sanding primer for topcoat application.
Preparing aircraft for topcoat application.
Masking, preparing and painting stripes as needed.
De-masking aircraft.
Polishing and detailing exterior paint.
Ability to paint/prime overalls
Ability to lead aircraft projects under supervisor’s direction.
Assist with training of Junior Technicians
Other duties as assigned
Requirements
2-3 years of experience painting corporate or VIP aircraft
High School diploma or equivalent
Miscellaneous
Physical: Occasionally lifts up to 50 lbs, rarely lifts up to 100 lbs Stands for long periods of time, with frequent sitting, bending, squatting, kneeling, stooping, and balancing Uses hands and arms to reach, grasp or pull, subjective to vibrations. Reads, writes, speaks and understands English fluently Visual acuity correctable to 20/20 Works in precarious places, heights above six feet, noisy environments Ability to wear PPE Works with and exposure to toxic, caustic chemicals and fumes associated with aircraft repair & modifications Other: Ability to attain & retain AOA badge or Airport requirements Regularly scheduled attendance required Occasional overnight and short notice travel Must be able to work various shifts and overtime as directed Man-lift qualified
About Our Client
Our Client is a known and trusted name for providing the industry’s highest quality business aviation solutions. An expert in light to mid-sized jets and turboprops with factory authorizations from manufacturers such as Hawker Beechcraft, Embraer and more, customers from around the world fly to our client for all of their aviation needs.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
126080167617469
Applies a mastery of technical skills and knowledge and a detailed knowledge of industry standards and government regulations related to applying and ensuring quality of final paint application on original equipment manufactured parts, components and complete subsystems for operational aircraft applications.
Essential Duties and Responsibilities
Performs assembly of original equipment manufacturing of parts, components and subsystems for aircraft applications using products and processes are varied but generally not complex in scope to apply primer, topcoat paint, and any spray-applied coatings to aircraft parts consistent with government, customer and company standards. The level of work performed requires some skill and experience. Priorities are determined by management.
Reads and interprets specifications and documents to define the scope of work on work orders.
Cleans grease and dirt from product. Removes rust from metal with acid, wire brush, or steel wool. Applies masking tape over parts and areas that are not to be coated. Fills cavities and dents with putty to attain smooth surface.
Computes mix ratios in order to mix paint materials. Selects and mixes coating liquid to produce desired color. Pours coating liquid into spray container and connects gun to air hose. Turns sprayer valves and nozzle to regulate width and pressure of spray.
Selects the appropriate personal protective equipment for the operation to be performed. When using a respirator ensures the respirator is working properly and is properly worn.
Applies spray onto work surface to apply prime or finish using protective or decorative material such as paint, enamel, glaze, gel-coat, or lacquer. Coats areas inaccessible to hand sprayer with brush. Heats and sprays wax onto products after they are tested. Cleans spraying equipment and brushes with solvent.
Ensures compliance with environment regulations and maintains records in accordance with these environment regulations.
Requirements
7-10 Years (Aircraft Painting Experience)
Will take a mixture of Aircraft experience and Auto Experience
Miscellaneous
About Our Client
This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
140756365002895
The Sheet Metal Mechanic is responsible for assembling and/or repairing of aircraft parts, components, subsystems and operating systems.
Essential Duties and Responsibilities
Reads work instructions including production planning, engineering drawings, full size Mylar layouts, process specifications and other technical documentation to insure proper detail configuration.
Determines dimensions to layout holes patterns, install clips, brackets, nut plates and like items.
Lays out and marks dimensions and reference lines on material with or without templates or shop aides to develop or back drill hole patterns on composite, sheet metal and mechanical parts.
Trims sheet metal and composite parts to fit and files, grinds, deburrs, buffs, and smooths surfaces.
Installs assemblies in assembly jigs, fixtures or other tooling according to work instructions.
Assembles parts into subassemblies and final assemblies using basic hand tools such as, drill motors, die grinders, sanders, polishers, rivet shavers and other like tools.
Drills holes of varying sizes in detail parts and subassemblies according to work instructions.
Installs blind rivets, Jo-Bolts, hilocks, huck bolts, solid rivets and bolts, drives and bucks rivets to attach and assemble detail parts to structural parts and complete subassemblies to written and verbal work instructions.
Inspects completed assemblies for conformance to specifications.
Completes and maintains necessary paperwork for documenting processes performed.
Requirements
High School Diploma or GED
Two (4) or more years of major aircraft structural assembly.
Miscellaneous:
Must provide own tools
Miscellaneous
About Our Client
This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
140452887308284
The Sheet Metal Mechanic is responsible for assembling and/or repairing of aircraft parts, components, subsystems and operating systems.
Essential Duties and Responsibilities
Reads work instructions including production planning, engineering drawings, full size Mylar layouts, process specifications and other technical documentation to insure proper detail configuration.
Determines dimensions to layout holes patterns, install clips, brackets, nut plates and like items.
Lays out and marks dimensions and reference lines on material with or without templates or shop aides to develop or back drill hole patterns on composite, sheet metal and mechanical parts.
Trims sheet metal and composite parts to fit and files, grinds, deburrs, buffs, and smooths surfaces.
Installs assemblies in assembly jigs, fixtures or other tooling according to work instructions.
Assembles parts into subassemblies and final assemblies using basic hand tools such as, drill motors, die grinders, sanders, polishers, rivet shavers and other like tools.
Drills holes of varying sizes in detail parts and subassemblies according to work instructions.
Installs blind rivets, Jo-Bolts, hilocks, huck bolts, solid rivets and bolts, drives and bucks rivets to attach and assemble detail parts to structural parts and complete subassemblies to written and verbal work instructions.
Inspects completed assemblies for conformance to specifications.
Completes and maintains necessary paperwork for documenting processes performed.
Requirements
High School Diploma or GED
Two (4) or more years of major aircraft structural assembly.
Miscellaneous:
Must provide own tools
Miscellaneous
About Our Client
This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
104846775481835
Our client is hiring Structures Mechanics to join their widebody heavy maintenance team. If you've got sheet metal skills and a passion for aircraft structure repair—this is your runway.
Essential Duties and Responsibilities
Perform structural modifications and repairs on 767 and other widebody aircraft
Use SRMs, blueprints, and engineering drawings to execute precise work
Remove and install panels, stringers, frames, doublers, and other structural components
Collaborate with inspectors and production control for timely task completion
Complete repair documentation and follow safety/quality protocols
Requirements
Minimum of 1 year of experience in aircraft structures or sheet metal repair
A&P license preferred but not required
Experience with 767 or other widebody aircraft strongly preferred
767 Gen Fam is a huge advantage—contractors may be eligible to attend after 6 months
Must be able to read, write, and speak English
Must be able to pass a 10-year background check and drug screen
Miscellaneous
About Our Client
Our client operates one of the most respected heavy maintenance MRO facilities in the country. Located in Wilmington, OH, this site specializes in widebody aircraft—particularly the Boeing 767—and serves major commercial and cargo airlines. With a strong focus on safety, quality, and continuous improvement, the facility offers cutting-edge tools, large-scale projects, and a collaborative team environment. Contractors who demonstrate commitment and performance may have access to Gen Fam training and long-term opportunities. This is a prime location for technicians looking to build experience on widebody aircraft and grow with a leader in the aviation industry.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
151814773892943
A&P Mechanics perform complex aircraft inspections, repairs, and modifications with minimal supervision. They must ensure that all work accomplished meets quality standards and specifications while interpreting aircraft technical manuals and electrical drawings. Mechanics must be able to follow standard operating procedures and operating support equipment such as external power carts, hydraulic mules, lift platforms, and tow tugs).
Essential Duties and Responsibilities
Perform scheduled, unscheduled or special inspections and maintenance in accordance with Manufacturer’s Maintenance Manuals and Federal Aviation regulations
Troubleshoot aircraft systems and perform operational and functional checks; service oil, tires, fuel and hydraulic systems; provide nitrogen and oxygen servicing; inspect and repair pitot static systems and provide battery servicing
Troubleshoot and perform maintenance/repairs/component removal/installation on aircraft, engines and a variety of electrical, mechanical and hydraulic components and accessories such as propellers, starters, generators, fuel pumps, hydraulic pumps, actuators, wheels, tires and brakes.
Perform structural repairs to airframes, including sheet metal work, riveting, patching and fiberglass/composite work
Certify all work as required by FAA regulations, industry guidelines and company standards/procedures, including interfaces as necessary with various computer tracking systems and using appropriate company forms
Make required entries for work orders, discrepancies, and corrective actions, and complete all associated computer/paperwork requirements, including turnover logs
Assist and train other technicians when needed
Participate in ongoing training opportunities, as appropriate for position
Perform other duties as assigned
Requirements
2-5 years of aircraft maintenance experience
Current FAA Airframe and Powerplant license
High School Diploma or General Education Degree required.
Excellent interpersonal oral and written communication skills. Must be able to read, write and speak English.
Highly proficient with computer based technical data programs, and be competent in researching and use of appropriate technical manuals and industry reference materials
Must be mechanically adept and demonstrate the skills and knowledge consistent with industry standards for this position, including an understanding of various airframe and power plant systems.
Must be able to work inside and outside under varying work and climatic conditions, have the ability to lift up to 70 pounds and must be comfortable with heights.
Must have own tools
Experience desired on CRJ and ERJ aircraft, Sheet metal experience is a plus
Must have strong drive for top notch customer service and safety, and be a team player with a “Can Do” attitude.
This is a safety-sensitive position and falls under the provisions of the FAA's mandatory drug and alcohol testing requirements, including the release of prior drug and alcohol testing results from previous employers for the past two (2) years
Must pass a pre-employment drug screening and full background investigation which may include education, criminal and work history verifications. If hired, will be subject to mandatory random drug testing.
Miscellaneous
Must Bring Tools
About Our Client
Our client is a complete, one stop FAR part 145 repair station housed in a 32,000 square foot hangar facility located on Sioux City, Iowa's Sioux Gateway Airport (KSUX). They have all the necessary capabilities required to take care of any and all of their clients airline's needs. They provide a complete range of in-house maintenance and repair options from heavy checks, line maintenance, sheet metal repair and fabrication, all the way to complete exterior aircraft paint. They currently have numerous aircraft and engines on our certificate, including General Electric, Pratt an Whitney, and Rolls Royce. Aircraft include Saab, Beech, Embraer, De Haviland, and Bombardier CRJ 900 and Q 400 aircraft. In addition, we have staff mechanics, equipment, and personnel ready at a moments notice to dispatch 24/7 to any location necessary to get your AOG aircraft back in service.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
119413428058569
