Find the right job for your preferred location and specialty
Jobs Available
201 - 210 of 255 Matches
The Aircraft Mechanic II, with limited supervision, assists with testing, adjusting and repairing, and other general tasks related to the maintenance and repair of a airframe systems and components on a variety of airframes in a safe and clean work environment according to manufacturer’s specifications, company approved procedures and customer specifications. In addition, this position prepares and completes appropriate documentation in a timely manner.
Essential Duties and Responsibilities
With limited supervision, assists in high quality inspections, servicing, and maintenance of airframe systems and components on a variety of airframes, using proper hand tools in a timely, clean, safe and professional manner with no rework. Accurately order general aircraft parts as needed.
With limited supervision, performs minor troubleshooting, function testing, and repair of aircraft systems and components.
Prepares various documents for record keeping purposes, as required by Company policy and FAA regulations (i.e. turnovers, removal sheets, personal training log, etc.). Demonstrates proficiency of Duncan Aviation work order system by completing accurate and timely discrepancies and corrective action statements, Service Bulletins and Airworthiness Directives (AD) Compliance statements, final inspection and closing of squawks and work orders.
Consistently locates and uses appropriate technical data and follows verbal instructions when accomplishing assigned maintenance tasks.
Performs other related duties as assigned by management.
Requirements
Airframe license required; powerplant preferred.
2+ years aircraft airframe maintenance experience required
Previous Corporate Aviation or MRO experience is preferred
High school graduate or equivalent required
Experience in leading aviation maintenance projects is preferred
Must have valid driver’s license and acceptable driving record; Respirator Fit qualified; Man Lift qualified; tool inventory per department tool list required
Attendance: Regularly scheduled attendance required; occasional overnight and short notice travel required
Physical: Routinely lifts up to 50 lbs. and occasionally up to 100 lbs.; reads small print; hears sounds associated with mechanical deficiencies; repetitive motion; works with moving parts and vibration; tolerates products, materials and fumes associated with component maintenance; tolerates working in confined spaces and heights above four feet; tolerates walking, bending, kneeling, stooping, crouching, crawling, climbing and sitting
Environmental: Tolerates working in extreme temperatures and in noisy environments
Miscellaneous
About Our Client
Our client is the largest privately owned business jet service provider in the world, known for its dedication to quality and customer service. With a rich history dating back to 1956, our client offers a comprehensive range of services, including airframe and engine maintenance, avionics installations and repair, interior and paint refurbishments, and aircraft sales and acquisitions. Operating from several full-service locations and numerous satellite shops across the United States, our client is committed to providing innovative solutions and maintaining the highest standards in the aviation industry.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
127824232537536
Seeking 2+ years Experience in a Structures Component Shop environment
Essential Duties and Responsibilities
Accomplish incoming preliminary inspections on aircraft/components in accordance with customer cards or manufacturer’s manuals.
Accurately disposition preliminary discrepancies.
Complete job assignments in a timely manner.
Complete on-the-job-training (OJT) forms and required reading.
Help with general clean-up of work area.
Responsible for accurately clocking to jobs.
Perform other duties as assigned.
Requirements
To perform this job successfully, an individual must be able to perform each essential duties satisfactorily.
Applicant must have regular and prompt attendance and be flexible to work a variety of shift schedules and shift hours.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Has basic knowledge of aircraft.
Dispositions of repairs for components.
Ability to read and understand AMM, SRM, SOPM, CMM, AIPC or Engineering data.
Communicate effectively with personnel at all levels and keep co-workers and leadership apprised of work progress and difficulties as they arise.
Good verbal and written communication skills. (General knowledge of PowerPoint and Word programs)
Ability to read and interpret documents as well as communicate effectively with other all personnel at all levels regarding job related issues.
Must have knowledge of fundamental maintenance operations and practices.
Ability to perform basic and intermediate mathematical functions.
Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Miscellaneous
Tools are required
About Our Client
Employee turnover rate of less than 1% in our 8 year history. Our mechanics have a combined 150+ years of aviation and composite experience.
Reputation with our customers for streamlining repair processes. Lean, six-sigma, kiazen have been applied to realistic segments of our business.
Vast and growing capabilities with precise focus on composite technology and industry trends. Interior and Exterior composite products.
"A" Class Quality is instilled across the organization. Audited seamless processes and integrity will result in a quality component delivery.
Priority on turn time demands by product and customer. Tracking and status parameters ensure the turn time is met for the supply needs.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
100629285455431
The Aircraft Painter performs masking, stripping, prepping, painting and detailing aircraft and parts based on customer standards and order specifications in a timely manner.
Essential Duties and Responsibilities
Masking, stripping, prepping, painting and detailing.
Apply primer and finish coats to aircraft parts or body of aircraft.
Layout paint schemes and designs.
Set up and operate typical shop equipment such as orbital sanders, dye grinders, paint guns and other general shop equipment and tools to complete work assignments based on customer specifications.
Uses Personal Protective Equipment (PPE) and follow all safety rules as required in compliance with OSHA standards.
Experienced with Scissor and Boom lift operations.
Additional tasks may be assigned based on customer specifications and demands.
Requirements
Must have 3-5 years’ paint experience on commercial aircraft.
High School Diploma or General Education Degree (GED) preferred.
Must be able to read, write and communicate in English.
Closed toe shoes or boots (no open toed shoes).
Must be able to pass a pre-employment drug screen and criminal background check.
Must have own tools
Miscellaneous
Tools Required
About Our Client
Our client hosts maintenance facilities in Calgary, Canada, Great Falls, MT and Jacksonville, FL providing complete maintenance, interiors refurbishment and storage capabilities for regional airlines, manufacturers and aircraft leasing companies.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
122078927203836
Applies advanced technical skills and knowledge to program and operate multi-purpose numerically controlled machines to perform defined combinations of machining operations.
Essential Duties and Responsibilities
Performs tasks that are moderate to complex requiring experience and judgment to complete.
Reviews setup sheets and specifications to determine setup procedure, machining sequence, and dimensions of finished work piece. Attaches fixture to machine bed and positions and secures work piece in fixture according to setup instructions.
Assembles cutting tools in tool holders and positions tool holders in machine spindles as specified or inserts cutting tools in specified machine magazines.
Enters commands to retrieve pre-programmed machine instructions from database and machine control console.
Operates controls and enters commands to index cutting tool to specified set point and start machine. Observes and listens to machine operation to detect malfunctions such as worn or damaged cutting tools.
Changes cutting tools and location of work piece during machining process as specified in setup instructions. Measures work piece for conformance to specifications.
Adjusts machine feed and speed, changes cutters to machine parts according to specifications when automatic programming is faulty or machine malfunctions.
Sets up and operates the machine to produce parts. Observes operation of machine on trial run to prove taped or programmed instructions.
Ancillary Job Functions and Responsibilities:
Performs other duties as required. These duties may include assignments in job classifications other than the primary assignment.
Requirements
Special Job Requirements, Licenses or Certifications:
• Must be able to read and write the English language and learn to interpret and comprehend company policies, procedures, safety instructions, planning and work instructions, blueprints, assembly and fabrication orders, engineering specifications, Material Safety Data Sheets, and other like documents used in an aerospace manufacturing environment.
• Must be fully competent in the programming and operation of computers that interface with CNC machine controls and also operation of CNC machine controls. Moderately competent in the use of CNC machine interface and operating software such as AutoCad and MasterCam.
Special Training:
• Safety training as required by OSHA.
Miscellaneous
About Our Client
This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
127381149669728
Applies advanced technical skills and knowledge to program and operate multi-purpose numerically controlled machines to perform defined combinations of machining operations.
Essential Duties and Responsibilities
Performs tasks that are moderate to complex requiring experience and judgment to complete.
Reviews setup sheets and specifications to determine setup procedure, machining sequence, and dimensions of finished work piece. Attaches fixture to machine bed and positions and secures work piece in fixture according to setup instructions.
Assembles cutting tools in tool holders and positions tool holders in machine spindles as specified or inserts cutting tools in specified machine magazines.
Enters commands to retrieve pre-programmed machine instructions from database and machine control console.
Operates controls and enters commands to index cutting tool to specified set point and start machine. Observes and listens to machine operation to detect malfunctions such as worn or damaged cutting tools.
Changes cutting tools and location of work piece during machining process as specified in setup instructions. Measures work piece for conformance to specifications.
Adjusts machine feed and speed, changes cutters to machine parts according to specifications when automatic programming is faulty or machine malfunctions.
Sets up and operates the machine to produce parts. Observes operation of machine on trial run to prove taped or programmed instructions.
Ancillary Job Functions and Responsibilities:
Performs other duties as required. These duties may include assignments in job classifications other than the primary assignment.
Requirements
Special Job Requirements, Licenses or Certifications:
• Must be able to read and write the English language and learn to interpret and comprehend company policies, procedures, safety instructions, planning and work instructions, blueprints, assembly and fabrication orders, engineering specifications, Material Safety Data Sheets, and other like documents used in an aerospace manufacturing environment.
• Must be fully competent in the programming and operation of computers that interface with CNC machine controls and also operation of CNC machine controls. Moderately competent in the use of CNC machine interface and operating software such as AutoCad and MasterCam.
Special Training:
• Safety training as required by OSHA.
Miscellaneous
About Our Client
This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
142145514474227
APA Services is seeking to hire Senior AOG Mechanics for a long term opportunity in Naples, FL
Essential Duties and Responsibilities
Will work 7 on and 7 off
Must be able to pass client's insurance carrier to be allowed to drive the AOG trucks.
no DUI, reckless driving charges, or excessive points
Under minimal supervision perform a variety of air frame and powerplant service, modification and completion functions.
Working on corporate aircraft doing Depot level maintenance, so must have a knowledge of the aircraft from nose to tail.
Conduct operational checks on all aircraft systems such as landing gear, engine components, electrical components, control systems including APU operations.
Will be performing scheduled/non scheduled maintenance and phase inspections.
Candidate should have good solid corporate aircraft experience and an A&P License is required.
Requirements
5+ years’ AOG experience on at least THREE of the following aircraft...Bombardier Challenger 300/350/600, Bombardier Global 5000/5500/6000, Citation Latitude/Sovereign/XLS, Phenom 300, King Air 200/300/350, Legacy 4500/500, Praetor
Tools and Truck will be provided
Solid work history required (This is a long term assignment. Applicant’s with short stents of employment over the previous 2 years will not be considered)
High School Diploma or GED
Miscellaneous
no tools MUST HAVE CLEAN DRIVING RECORD
About Our Client
Since 1950, our partner has set the standard for excellence in business aircraft sales, service and management. Its rich history began in Greenville, SC and has expanded to additional locations in Nashville, TN & Dayton, OH.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
684209789590882
The Aircraft Composite Technician will be responsible for inspection, repairs and fabrication of aircraft composite structures and components on customer aircraft. Performs work on assigned aircraft including assembly, repair, and modification as qualified while adhering to FAA regulations.
Essential Duties and Responsibilities
Know various types of aircraft sealant and appropriate method application for sealant as well as aircraft fasteners and basic methods of installation and suitable substitutions.
Fabricate parts as required and have knowledge of metal and alloys and where substitutes may be used.
Layout and perform complex structural repairs that are addressed in the repair manuals and engineering documents.
Perform such typical maintenance operations such as the removal and replacement of aircraft and powerplant components that require bolting, torqueing, adjusting rigging and safety wiring, including powerplant and flight control removal and reinstallation.
Repair, modify, replace, or overhaul aircraft and aircraft systems to ensure airworthiness.
Requirements
5+ years of composites experience on aircraft
Experienced with Maintenance Manuals, illustrated parts Catalog, Blueprints, ATA Codes, Service Bulletins, routine and non-routines and other related maintenance documents.
Experience with wet layups
Ability to read, write and communicate in the English language.
Must have own tools
High School Diploma or GED
Ability to operate safely all ground support equipment, (i.e., Main Lifts, Scissor Lifts, etc.) and possess the Company operating certification.
Able to do hot bond repairs with Heatcon hot bonders
Able to do metal prep and metal bonds on wing with hot bonders
Able to co composite material hot bonds with hot bonders
Proficiency with reading and understanding manual references for assigned jobs
Must be able to lift fifty (50) lbs. Subject to continual loud noises. Must be able to bend, stoop, kneel, and stand for prolonged periods of time, climb steps, ladders and/or service stands.
Visual Acuity must be a minimum of 20/40 corrected.
Normal or corrected hearing is required.
Must be able to be at work on time and when needed with reliable transportation
Miscellaneous
About Our Client
Our Client provides aftermarket commercial aircraft, engines, and its parts to passenger and cargo airlines, leasing companies, original equipment manufacturers, and government and defense contractors, as well as maintenance, repair, and overhaul (MRO) service providers worldwide. They were founded in 2008 and are headquartered in Florida.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
753811368310605
The Aircraft Mechanic II, with limited supervision, assists with testing, adjusting and repairing, and other general tasks related to the maintenance and repair of a airframe systems and components on a variety of airframes in a safe and clean work environment according to manufacturer’s specifications, company approved procedures and customer specifications. In addition, this position prepares and completes appropriate documentation in a timely manner.
Essential Duties and Responsibilities
With limited supervision, assists in high quality inspections, servicing, and maintenance of airframe systems and components on a variety of airframes, using proper hand tools in a timely, clean, safe and professional manner with no rework. Accurately order general aircraft parts as needed.
With limited supervision, performs minor troubleshooting, function testing, and repair of aircraft systems and components.
Prepares various documents for record keeping purposes, as required by Company policy and FAA regulations (i.e. turnovers, removal sheets, personal training log, etc.). Demonstrates proficiency of Duncan Aviation work order system by completing accurate and timely discrepancies and corrective action statements, Service Bulletins and Airworthiness Directives (AD) Compliance statements, final inspection and closing of squawks and work orders.
Consistently locates and uses appropriate technical data and follows verbal instructions when accomplishing assigned maintenance tasks.
Performs other related duties as assigned by management.
Requirements
Airframe & Powerplant license required
2+ years aircraft airframe maintenance experience required
Previous Corporate Aviation or MRO experience is preferred
High school graduate or equivalent required
Experience in leading aviation maintenance projects is preferred
Must have valid driver’s license and acceptable driving record; Respirator Fit qualified; Man Lift qualified; tool inventory per department tool list required
Attendance: Regularly scheduled attendance required; occasional overnight and short notice travel required
Physical: Routinely lifts up to 50 lbs. and occasionally up to 100 lbs.; reads small print; hears sounds associated with mechanical deficiencies; repetitive motion; works with moving parts and vibration; tolerates products, materials and fumes associated with component maintenance; tolerates working in confined spaces and heights above four feet; tolerates walking, bending, kneeling, stooping, crouching, crawling, climbing and sitting
Environmental: Tolerates working in extreme temperatures and in noisy environments
Miscellaneous
About Our Client
Our client is the largest privately owned business jet service provider in the world, known for its dedication to quality and customer service. With a rich history dating back to 1956, our client offers a comprehensive range of services, including airframe and engine maintenance, avionics installations and repair, interior and paint refurbishments, and aircraft sales and acquisitions. Operating from several full-service locations and numerous satellite shops across the United States, our client is committed to providing innovative solutions and maintaining the highest standards in the aviation industry.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
653566637310284
Applies knowledge of basic production procedures to assist other stakeholders and learn the processes to fabricate, rework, and repair metallic and nonmetallic bonded parts and assemblies for operational aircraft applications.
Essential Duties and Responsibilities
Performs routine developmental learning assignments and applies standard solutions to problems or work situations of a routine or repetitive nature. May perform a variety of routine duties related to any work operation in the manufacturing or repair of company and customer products as required.
Assists in performing tasks associated with determining the method and sequences of operation to be followed in fabrication of parts using materials such as graphite, fiberglass, plastic, boron, flock, mat, epoxy resins, rubber and like materials.
Assists in planning, fabricating and building adhesive bonded assemblies of metallic and nonmetallic composite materials.
Fabricates composite and metal parts into subassemblies for the purpose of prefitting in preparation for bonding/curing in presses, ovens, and autoclaves.
Assists in lay out, prefit, and assembly and lay-up of a variety of metal to metal and composite bonded assemblies.
May lay out and mark dimensions and reference lines on material to develop and trace patterns of product or parts, or uses templates.
Performs vacuum bagging for Autoclave cures up to 100 psi.
Learns to read and interpret blueprints, drawings, manuals, specifications sketches, job orders, planning documents and engineering drawings.
Selects tooling and materials compatible with the processing techniques identified in the work instructions.
Ancillary Functions and Responsibilities: Performs other duties as required. These duties may include assignments in job classifications other than the primary assignment.
Requirements
High School Diploma, GED or equivalent.
Previous work experience in a manufacturing environment preferred, but not required.
Must be able to use small hand tools and machinery.
Miscellaneous
About Our Client
This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
142217093325019
Applies knowledge of basic production procedures to assist other stakeholders and learn the processes to fabricate, rework, and repair metallic and nonmetallic bonded parts and assemblies for operational aircraft applications.
Essential Duties and Responsibilities
Performs routine developmental learning assignments and applies standard solutions to problems or work situations of a routine or repetitive nature. May perform a variety of routine duties related to any work operation in the manufacturing or repair of company and customer products as required.
Assists in performing tasks associated with determining the method and sequences of operation to be followed in fabrication of parts using materials such as graphite, fiberglass, plastic, boron, flock, mat, epoxy resins, rubber and like materials.
Assists in planning, fabricating and building adhesive bonded assemblies of metallic and nonmetallic composite materials.
Fabricates composite and metal parts into subassemblies for the purpose of prefitting in preparation for bonding/curing in presses, ovens, and autoclaves.
Assists in lay out, prefit, and assembly and lay-up of a variety of metal to metal and composite bonded assemblies.
May lay out and mark dimensions and reference lines on material to develop and trace patterns of product or parts, or uses templates.
Performs vacuum bagging for Autoclave cures up to 100 psi.
Learns to read and interpret blueprints, drawings, manuals, specifications sketches, job orders, planning documents and engineering drawings.
Selects tooling and materials compatible with the processing techniques identified in the work instructions.
Ancillary Functions and Responsibilities: Performs other duties as required. These duties may include assignments in job classifications other than the primary assignment.
Requirements
High School Diploma, GED or equivalent.
Previous work experience in a manufacturing environment preferred, but not required.
Must be able to use small hand tools and machinery.
Miscellaneous
About Our Client
This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
133632915632535