Jobs Available

191 - 200 of 217 Matches
Featured job

Sheetmetal Mechanic III

Southeast (Jacksonville, FL)
Posted on 9/25/2024

Perform a basic to advanced level skilled work to accomplish sheet metal repairs and replacements of structural parts. Fabricate replacement covering, panels, or fairings by using the removed parts as samples. Reads and complies with instructions and safety information as necessary for proper and safe completion of assigned work.

Essential Duties and Responsibilities

Cleans corrosion and treats metal surfaces per the manufacturer’s instructions and specifications. Performs basic sheet metal repairs and replacement of structural parts using the following skills: Use measuring instruments such as rulers and grip gauges Utilize hand and powered tools such as hammers, chisels, hand snips, band and circle saws, drill presses, squaring shears and brakes to cut and form Ability to assemble parts by, bolting, screwing, and riveting Determine different types of fasteners used by symbol Remove and install minor components of aircraft structure or systems such as fairings, cargo liners, cargo floors and access panels Ability to repair minor or secondary structure per the manufactures SRM Fabricates replacement covering, panels, or fairings by using the removed parts as samples. Performs repairs of a cosmetic nature in passenger cabin interiors. Performs and demonstrates understanding of sealing procedures of aircraft structures. Performs bonded repairs of honeycomb structures as instructed. Identifies the locations of pressurized areas of aircraft. Opens and closes areas on the aircraft that are required to be open for inspection. Applies corrosion preventatives and maintains knowledge of areas of the aircraft in which corrosion inhibiting liquids may not be applied. Possesses working knowledge of ATA Codes (Chapter and Subchapters) as well as aircraft zones, narrow body airframe familiarization, and industry standards. Reads maintenance manuals to identify and locate aircraft components on the aircraft, and accurately implements instructions of maintenance manuals. Identifies the structural composition of aircraft (i.e., aluminum or composite) prior to performing any work on the structure. Performs repairs on noted discrepancies, and effectively researches manufacturer’s manuals for appropriate repair procedures prior to performing repairs. Prepares and maintains simple records such as work order documentation, logs, and time and material records, as instructed. Follows safety procedures and wears/uses appropriate safety equipment for the work being performed. Reads instructions and safety information as necessary for proper and safe completion of assigned work. Performs other duties as assigned.

Requirements

Minimum 7 years of sheet metal experience on Airbus and Boeing Aircraft High School Diploma or GED required. Airframe & Powerplant License, preferred Have own tools Must be able to read, write, and speak effectively in English regarding safety sensitive work activities, per FAA requirements. Individual will perform daily transactions within the ERP system (AMROS KIOSK), vending (POU), as well as research customer’s maintenance manuals. Work safely and follow safety rules and regulations. Take action to prevent others from engaging in unsafe practices.

Miscellaneous

Must report with two forms of employment eligibility identification

About Our Client

Our client is an independent provider of aviation services to commercial and government customers in more than 100 countries. Our client's aftermarket expertise and award-winning solutions help customers increase efficiency and reduce costs while maintaining high levels of quality, service and safety.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

155165944103189

Featured job

Avionics/Elec Tech Sr

Southeast (Savannah, GA)
Posted on 9/25/2024

Provides leadership, technical expertise and guidance while performing various operational, functional tests and repairs of avionics/electronic, aircraft equipment and systems to ensure a defect free aircraft. Provides superior technical expertise in testing, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise and leadership by defining and implementing process changes to reduce cost and meet schedule without compromising Safety or Quality. Demonstrates the knowledge and leadership skills required. to fill in for the team leader thus ensuring that the company goals of Safety and Quality are enforced all times while adhering to daily work plans to maintain schedule requirements.

Essential Duties and Responsibilities

Essential Functions: Demonstrates superior technical skills and expertise in avionics and acft systems operational testing and troubleshooting. Provides direct training to personnel to support company cross-training goals while ensuring a safety conscience, quality oriented, skilled workforce. Teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. Ensures quality and efficiency of all installations: troubleshoots and teaches troubleshooting processes/concepts to provide timely, quality repairs of malfunctioning systems. Demonstrates the skills and knowledge required. to effective and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. Oversees the performance and compliance with engineering changes and modifications as required. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability. Demonstrates through diligent compliance the importance of maintaining daily logs and other paperwork. Ensures that all work performed on the acft is properly and completely documented . As required, pre-inspects work of others prior to submitting to inspection for approval to reduce rework and inspection time. Provides the knowledge and technical expertise in testing and maintaining test equipment and electronic systems and components as required. Enforces the company FOD program, tool control program, 5-S program and all safety regulations. Adapts to sudden schedule changes. Coordinates with other disciplines concerning projects. Additional Functions: Where required, teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. . Self inspection capability for all avionics testing functions in applicable areas. . In support of acft certification and final phase testing, may include flight tests on acft as required

Requirements

High School Diploma or GED required. 6 years Six (6) years experience in an avionics/electrical career field; OR two (2) years of accredited schooling in aviation electronics and four (4) years related experience. A & P license, FCC license or NCATT certification preferred. Other Requirements: Preferred proficiency in the operation and troubleshooting of other acft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. APU run qualification and engine run qualification preferred. Ability to read and interpret basic blueprints and schematic diagrams. Must be able to read, write, speak, and understand the English language.

Miscellaneous

Unique Skills: Must be able to work any shift as assigned by STM. Driving license is required.

About Our Client

Our client has led the evolution of business and personal aviation since the 1958 debut of the world’s first purpose-built business aircraft. Today, they produce the world’s most advanced business aircraft, with innovations from nose to tail and wingtip to wingtip, all while offering unmatched global product support and service.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

168774206054168

Featured job

Aircraft Mechanic III (unlicensed)

Midwest (Great Falls, MT)
Posted on 9/25/2024

As an Aircraft Mechanic III, you will be responsible for performing routine and non-routine maintenance on commercial aircraft.

Essential Duties and Responsibilities

Perform preventive maintenance, repairs, part replacement and modifications for aircraft Perform the assigned maintenance task in accordance with the Federal Aviation Regulations, manufacturer’s recommendations, customers approved maintenance program, approved or acceptable data. Troubleshoot problems, make repairs, and prepare areas for complete inspections. Perform high quality and airworthy work in accordance with the Task Card instructions provided to them by the Project Manager and/or their Lead. Become familiar with and follow the requirements of this Repair Station Manual, Federal Aviation Regulations, Airworthiness Directives, advisory circular, manufacturer’s service bulletins and any other required to perform their assigned work. Never begin any maintenance unless in possession of the proper, current and applicable approved or acceptable data. Report any difficulties, uncertainties, unserviceable equipment or potential safety hazards to their supervisor and observe all safety precautions in the performance of assigned tasks at all times. Report any tool issues to stores and ensure the correct tag is attached and properly completed. Take part in any required training including GMM and safety. Proven ability to work alone and in a team environment.

Requirements

8+ years aircraft maintenance experience Have own tools Adhere to standard procedures and policies. Accurately and legibly, record the maintenance or alteration on the proper repair station and/or customer supplied forms including their signature or initials and employee number. Able to perform intermediate/heavy maintenance tasks with little supervision. Perform flight control and engine throttle rigging.

Miscellaneous

Tools are required

About Our Client

Our client hosts maintenance facilities in Calgary, Canada, Great Falls, MT and Jacksonville, FL providing complete maintenance, interiors refurbishment and storage capabilities for regional airlines, manufacturers and aircraft leasing companies.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

162049632004626

Featured job

Avionics Installer I

Southeast (Savannah, GA)
Posted on 9/25/2024

Under moderate supervision, assists in the removal/installation of avionics electrical components, fabrication of wire harnesses, installations, terminations, ring-out, and functional tests of avionics/electrical systems

Essential Duties and Responsibilities

Essential Functions: Assists in installations, modifications and the fabrication of wiring and electrical components, fixtures, and associated equipment in accordance with blueprints, worksheets, and engineering drawings. Assists with the completion of tasks within allotted time frame. Assists with maintaining required. logs and records. Complies with the company FOD program, tool control program, 5-S program and all safety regulations. Additional Functions: Properly care for and maintain shop equipment and tools as assigned by Supervisor. . Perform other duties as assigned.

Requirements

High School Diploma or GED required. General knowledge of applicable regulatory requirements and customer specifications. Must know how to use a multimeter. Entry level position - Six (6) months accredited schooling in aviation electronics or general electrical experience preferred. Other Requirements: Technical Certificate in aircraft electrical assembly preferred. and/or successful completion in current year youth apprenticeship program sponsored by Gulfstream, in area of expertise. Ability to read and interpret basic blueprints and schematic diagrams. Strong written and verbal skills required. Computer skills and general software knowledge necessary.

Miscellaneous

Unique Skills: Electrical and or mechanical experience preferred

About Our Client

Our client has led the evolution of business and personal aviation since the 1958 debut of the world’s first purpose-built business aircraft. Today, they produce the world’s most advanced business aircraft, with innovations from nose to tail and wingtip to wingtip, all while offering unmatched global product support and service.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

489477944621640

Featured job

Aircraft Maintenance Manager

Midwest (Kansas City, MO)
Posted on 9/25/2024

The Aircraft Maintenance Manager manages assigned aircraft maintenance lines using production schedules, labor analysis, and budgetary information. Utilizes resources to manage entire projects for the maintenance, preventative maintenance, or alteration of aircraft. Oversees product quality while ensuring maintenance tasks and functions are carried out in compliance with the applicable requirements of the air carrier maintenance program and its inspection procedures manual.

Essential Duties and Responsibilities

• Ensures direction of maintenance programs is consistent with goals and targets. • Directly responsible for oversight of Aircraft Maintenance program. • Coordinates with Quality Control to assure, within the repair station limitations, that aircraft maintenance is performed and carried out in accordance with approved Federal Aviation, Manufactures, Customers and ATS procedures and requirements. • Reviews customer program and FAA regulations to ensure compliance. • Manages the overall maintenance, preventative maintenance, or alteration of, or approve and return to service any aircraft or part thereof. • Ensures communication of all significant information, including work, risk, safety and quality. • Ensures coordination with internal support organizations to provide necessary product and services when required. • Ensures Engineering priorities support aircraft delivery milestones. • Ensures all assigned areas are clean and audit ready and clear of hazards that pose a risk to employee safety and quality of work. Ensures compliance with safety requirements. • Directly responsible for the on-time delivery and adjustments of aircraft delivery schedules. • Monitors crew completion dates and hours estimates for inclusion in daily labor tracking. • Responsible for labor hours and part expenditures. • Ensures coordination of maintenance labor requirements in conjunction with other maintenance lines, to ensure most efficient utilization of labor and resources. • Coordinates LOW when all utilization options are exhausted. • Provides a positive interface with the customer. • Directly responsible for the Profit/Loss (P/L) of maintenance programs, achieving performance targets. Communicates budget plans with team. • Responsible for successful progression of mechanics through On-the-Job Training (OJT) program. • Reviews recommendations and implements changes to processes to improve efficiencies and workflow. • Complies with, communicates and ensures compliance of team members on company policies, procedures and Safety Management System (SMS) requirements. Promotes "Balanced Technician" concept. • Provides mentorship and training support to future and less-experienced managers. • Responsible for ensuring completion of all performance reviews, identifying career goals and development needs. • Provides regular feedback and performance coaching including appropriate management of time, prioritizing tasks, and ensuring proper knowledge and training to accomplish assignments to all members of maintenance line. • Responsible for adhering to all company required training. • Regular and predictable attendance. • Effective and appropriate conduct with co-workers. • Acts maturely and responsibly, conducting themselves in a professional, courteous and respectful manner toward co-workers, contractors, customers and vendors. • Responds openly and appropriately to feedback regarding performance from leadership. • Completes routine tasks independently. • Performs all duties in a manner which promotes and supports the ATS core values. • Integrates practices and tools to improve operational efficiency, reduce costs and increase customer satisfaction. • Completes all required learning assignments in Learning Management System (LMS). • Attends training to meet requirements of the job position and as needed or mandated by ATS, state and/or federal regulations. • Has regular and predictable attendance.

Requirements

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. KNOWLEDGE SKILLS AND ABILITIES: • Ability to communicate effectively both verbally and in writing. • Ability to communicate at all levels of personnel both internally and within customer organizations. • Ability to read and comprehend written documents. • Excellent negotiation skills. • Ability to solve complex problems and deal with a variety of variables. • Strong project management skills. • Proven ability to manage multiple tasks from multiple projects at one time. • Excellent leadership skills. • Demonstrates team player mind set and behavior. • Ability to effectively delegate. • Ability to positively resolve conflicts. • Ability to calculate moderate to complex mathematical functions. • Ability to understand complex operations from a broad perspective. • Proven knowledge in the procedures, practice, inspection methods, materials, tools, machine tools, and equipment generally used in the work which the station is rated. • Detailed knowledge of paperwork and publications and an understanding of technical information in order to facilitate troubleshooting. • Strong understanding of FAA regulatory requirements to include FAR Part 121 and 91 carriers. • Proficient in MS Office (Outlook, Word, Excel). • General working knowledge of Oracle, AutoTime, Gateway programs. EDUCATION AND EXPERIENCE: • Bachelor’s degree in related field preferred. • Minimum of five (5) years’ recent commercial aircraft maintenance and/or MRO experience required. • Minimum of three (3) years’ aircraft maintenance supervisory experience required. • Airframe, or Airframe & Powerplant (A&P) certification required.

Miscellaneous

SUPERVISORY RESPONSIBILITY: Carries out managerial responsibilities in accordance with the organization’s policies and applicable laws. Responsibilities may include, but not limited to, interviewing and training; development of required skills; planning, assigning and directing work; appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems.

About Our Client

This client is headquartered in Everett, Washington, with additional operations in Moses Lake, Washington; Kansas City, Missouri; and Fort Worth, Texas. This national MRO network provides seamless support for military, commercial and regional aircraft operators – including airframe maintenance, component repair, engineering support, fuselage painting, and business jet services.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

435926703456716

Featured job

Final Line Mech I

Southeast (Savannah, GA)
Posted on 9/25/2024

In a team oriented work environment, install parts and components, lines, cables, etc. in area assigned using required. tools and appropriate prints, specs, and operational requirements to complete work assigned through final inspection and assure conformance to specifications.

Essential Duties and Responsibilities

Principle Duties and Responsibilities: Essential Functions: Assemble, install, and adjust aircraft structure parts and system components. Rig control cables, sectors, linkages, control surfaces, landing gear and doors, engines, cowls, aircraft entry doors and associated parts and hardware. Remove and replace linkage, sectors, components, cut and fit system lines and associated hardware necessary to facilitate and perform basic repairs. Responsible for quality and efficiency of all installations; ensure all parts/assembly meet requirements. Perform necessary rework to ensure installations meet conformity. Install systems lines, valves, ducts and associated parts and hardware. Work to ensure a leak free system. Use a variety of tools and equipment, including permaswage pumps, dies, line cutting tools, wrenches, checking tools, witness gauges, etc. and tools to successfully complete component and perform minor structure installation. Remove and replace, cut and fit systems lines, panels and structural components and associated hardware necessary t o facilitate and perform basic repairs. Update and sign required. logs and records as required. Check own work to ensure a defect free installation prior to final inspection. Maintain a neat and orderly work area, support the company FOD and 5S programs and comply with all safety regulations. Demonstrate Gulfstream Manufacturing competencies in the employee effectiveness review. Maintain and use all logs and records such as MIR sheets, DMTs, Crabs, PCOs, etc. Support continuous improvement processes as assigned. . Additional Functions: In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. . Perform other duties as assigned. Other Requirements: Solumina and Smarteam experience preferred. Requires ability to read and interpret basic blueprints and schematic diagrams and use all tools required. to do the job. Ability to perform work such as basic drilling, reaming, ship fitting parts, etc. Must be able to climb ladders and stairs, work in small-space restricted areas and lift up to 50 lbs.

Requirements

Education and Experience Requirements High School Diploma or GED required. 1 year aerospace/aviation experience or equivalent mechanical experience such as auto mechanics, heavy equipment, etc. A&P license may offset the one year of experience required.

Miscellaneous

About Our Client

Our client has led the evolution of business and personal aviation since the 1958 debut of the world’s first purpose-built business aircraft. Today, they produce the world’s most advanced business aircraft, with innovations from nose to tail and wingtip to wingtip, all while offering unmatched global product support and service.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

390059521809851

Featured job

A&P Mechanic

Southeast (Chattanooga, TN)
Posted on 9/25/2024

Seeking experienced A&P Mechanics with Gulfstream experience in Chattanooga, TN

Essential Duties and Responsibilities

An aircraft and powerplant (A&P) mechanic maintains the airframe and engines of aircrafts to meet FAA standards. This job involves tasks such as performing routine checks and repairs, keeping records of inventory, and identifying faults with components of the plane

Requirements

2+ years A&P experience VIP experience

Miscellaneous

About Our Client

Our client has built a solid reputation for strong technical expertise and personalized customer service for maintenance and refurbishment of corporate aircraft. They also provide complete FBO services for aircraft in East Alton, Grand Junction, and Chattanooga.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

498953562979997

Featured job

Upholstery Technician

Midwest (Indianapolis, IN)
Posted on 9/25/2024

Under minimal supervision, learn the proper techniques to sew, foam, design and upholster high quality aircraft seats, trim, panels, and carpets for the completion of VIP aircraft.

Essential Duties and Responsibilities

Prepare all upholstered surfaces for foam and covering using various hand tools according to client approved procedures. Cleans glue off panels and strips materials from parts. Learn to perform basic sewing modifications to seat covers, curtains, and miscellaneous items using sewing machine, glue gun and other hand tools. Must be able to interpret material specs and engineering drawings to ensure installed interiors meet the design spec, quality standards and customer expectations. Learn to request material needs timely to ensure a continuous workflow. Adheres to all regulatory documentation regarding proper sign offs. As well as be able to ensure paperwork is complied with and completed timely in accordance with the client RSQM and other quality standards. Follow all department safety guidelines and ensure proper usage of tools and equipment. Basic knowledge of company installation procedures, process specs, IOPs, etc. Other duties as assigned but not covered herein.

Requirements

High School Diploma, or GED. Relevant trade school attendance is a plus. Basic knowledge of the Upholstery process as it specifically relates to the corporate aviation industry, in a completions environment. 3+ years aviation upholstery experience Ability to read, write, speak, and understand the English language. Ability to read and interpret blueprints and engineering documentation. Basic knowledge and willingness to learn all aspects of the Upholstery process. Willingness to obtain knowledge of the RSQM and FAA requirements as it relates to Upholstery Installation. Working knowledge of computers and related software utilized by client. Willingness to obtain working knowledge of lean or other continuous improvement opportunity techniques.

Miscellaneous

The work environment described here is representative of those required by an employee to perform the essential functions of this job with or without reasonable accommodations. The location where this position works is in the back shop of an aircraft hangar environment which could be subject to weather changes and is subject to constant exposure to loud noise, potential contact with hazardous waste material, heavy machinery and other safety hazards such as cabinets, etc. PHYSICAL DEMANDS: The physical demands described here is representative of those required by an employee to perform the essential functions of this job with or without reasonable accommodations.

About Our Client

Our Client is continuously innovating in the large to very large business jet aircraft segment engineering luxury into our cabin completions, upgrades and refurbishments. Located in Indianapolis, Indiana our client has established itself as one of the most unique and modern completion & service centers in the world exclusively for Airbus Corporate Jets, Boeing Business Jets, Bombardier Business aircraft and Sukhoi Business Jets.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

375549318217566

Featured job

Aircraft Mechanic I (unlicensed)

Midwest (Great Falls, MT)
Posted on 9/25/2024

As an Aircraft Mechanic I, you will be responsible for performing routine and non-routine maintenance on commercial aircraft.

Essential Duties and Responsibilities

Perform preventive maintenance, repairs, part replacement and modifications for aircraft Perform the assigned maintenance task in accordance with the Federal Aviation Regulations, manufacturer’s recommendations, customers approved maintenance program, approved or acceptable data. Troubleshoot problems, make repairs, and prepare areas for complete inspections. Perform high quality and airworthy work in accordance with the Task Card instructions provided to them by the Project Manager and/or their Lead. Become familiar with and follow the requirements of this Repair Station Manual, Federal Aviation Regulations, Airworthiness Directives, advisory circular, manufacturer’s service bulletins and any other required to perform their assigned work. Never begin any maintenance unless in possession of the proper, current and applicable approved or acceptable data. Report any difficulties, uncertainties, unserviceable equipment or potential safety hazards to their supervisor and observe all safety precautions in the performance of assigned tasks at all times. Report any tool issues to stores and ensure the correct tag is attached and properly completed. Take part in any required training including GMM and safety. Proven ability to work alone and in a team environment.

Requirements

2+ years aircraft maintenance experience Have own tools Adhere to standard procedures and policies. Accurately and legibly, record the maintenance or alteration on the proper repair station and/or customer supplied forms including their signature or initials and employee number. Able to perform intermediate/heavy maintenance tasks with little supervision. Perform flight control and engine throttle rigging.

Miscellaneous

Tools are required

About Our Client

Our client hosts maintenance facilities in Calgary, Canada, Great Falls, MT and Jacksonville, FL providing complete maintenance, interiors refurbishment and storage capabilities for regional airlines, manufacturers and aircraft leasing companies.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

522109377584234

Featured job

A&P Mechanic II

South Central (Denton, TX)
Posted on 9/25/2024

A&P Mechanic will service troubleshoot, repair, modify, preserve, maintain, and overhaul aircraft, aircraft systems, and aircraft components in accordance with policies, procedures, requirements, and specifications established by the company, applicable government agencies, and aircraft manufactures as contained in approved Maintenance Manuals.

Essential Duties and Responsibilities

Must have working knowledge and the ability to service troubleshoot, repair, modify, preserve, maintain, and overhaul aircraft, aircraft system, and aircraft components. Performs all work assigned in accordance with approved maintenance procedures. Records work performed and assumes responsibility for that work as indicated by his/her signature. Uses blueprints, schematics, technical drawings, and Maintenance Manuals in performance of assigned duties. Performs touch up painting as needed, (within task area). May do experimental and developmental work as assigned.

Requirements

3+ years of experience working on corporate or GA aircraft. Have own tools - tools must be shadowed High School Diploma or equivalent

Miscellaneous

About Our Client

In 1995 our client launched as an aircraft instrument, radio and avionics repair shop to complement their parts distribution company previously founded. In time, the company has become a FAA/EASA Part 145 repair station and grown to serve a variety of general aviation, business, commercial, and government aircraft, including fixed and rotary-winged operators around the world. Today they specialize in three major MRO markets: avionics, aircraft maintenance and component repair and continues to strategically expand.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

293856454693302

Benefits of working with APA Services

Weekly Payroll, Medical Insurance Available, Cash Advances, Travel Pay and/or bonuses on Select Contracts.
We know it takes great people to do great work, so if you're interested in joining the APA Services family, give us a call at:

(817)529-4000

Thanks for taking the time to visit APA Services and we look forward to working with you soon.

Browse All Jobs