Find the right job for your preferred location and specialty
Jobs Available
141 - 150 of 217 Matches
The Aircraft Mechanic II, with limited supervision, assists with testing, adjusting and repairing, and other general tasks related to the maintenance and repair of a airframe systems and components on a variety of airframes in a safe and clean work environment according to manufacturer’s specifications, company approved procedures and customer specifications. In addition, this position prepares and completes appropriate documentation in a timely manner.
Essential Duties and Responsibilities
With limited supervision, assists in high quality inspections, servicing, and maintenance of airframe systems and components on a variety of airframes, using proper hand tools in a timely, clean, safe and professional manner with no rework. Accurately order general aircraft parts as needed.
With limited supervision, performs minor troubleshooting, function testing, and repair of aircraft systems and components.
Prepares various documents for record keeping purposes, as required by Company policy and FAA regulations (i.e. turnovers, removal sheets, personal training log, etc.). Demonstrates proficiency of Duncan Aviation work order system by completing accurate and timely discrepancies and corrective action statements, Service Bulletins and Airworthiness Directives (AD) Compliance statements, final inspection and closing of squawks and work orders.
Consistently locates and uses appropriate technical data and follows verbal instructions when accomplishing assigned maintenance tasks.
Performs other related duties as assigned by management.
Requirements
Airframe License Required; Powerplant License Preferred
2+ years aircraft airframe maintenance experience required
Previous Corporate Aviation or MRO experience is required
High school graduate or equivalent required
Experiencing leading aviation maintenance projects is preferred
Valid drivers license required
Miscellaneous
Attendance: Regularly scheduled attendance required; occasional overnight and short notice travel required Physical: Routinely lifts up to 50 lbs. and occasionally up to 100 lbs.; reads small print; hears sounds associated with mechanical deficiencies; repetitive motion; works with moving parts and vibration; tolerates products, materials and fumes associated with component maintenance; tolerates working in confined spaces and heights above four feet; tolerates walking, bending, kneeling, stooping, crouching, crawling, climbing and sitting Environmental: Tolerates working in extreme temperatures and in noisy environments
About Our Client
Our client is the largest privately owned business jet service provider in the world, known for its dedication to quality and customer service. With a rich history dating back to 1956, our client offers a comprehensive range of services, including airframe and engine maintenance, avionics installations and repair, interior and paint refurbishments, and aircraft sales and acquisitions. Operating from several full-service locations and numerous satellite shops across the United States, our client is committed to providing innovative solutions and maintaining the highest standards in the aviation industry.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
190307119254337
The Aircraft Mechanic II, with limited supervision, assists with testing, adjusting and repairing, and other general tasks related to the maintenance and repair of a airframe systems and components on a variety of airframes in a safe and clean work environment according to manufacturer’s specifications, company approved procedures and customer specifications. In addition, this position prepares and completes appropriate documentation in a timely manner.
Essential Duties and Responsibilities
With limited supervision, assists in high quality inspections, servicing, and maintenance of airframe systems and components on a variety of airframes, using proper hand tools in a timely, clean, safe and professional manner with no rework. Accurately order general aircraft parts as needed.
With limited supervision, performs minor troubleshooting, function testing, and repair of aircraft systems and components.
Prepares various documents for record keeping purposes, as required by Company policy and FAA regulations (i.e. turnovers, removal sheets, personal training log, etc.). Demonstrates proficiency of Duncan Aviation work order system by completing accurate and timely discrepancies and corrective action statements, Service Bulletins and Airworthiness Directives (AD) Compliance statements, final inspection and closing of squawks and work orders.
Consistently locates and uses appropriate technical data and follows verbal instructions when accomplishing assigned maintenance tasks.
Performs other related duties as assigned by management.
Requirements
Airframe license required; powerplant preferred.
2+ years aircraft airframe maintenance experience required
Previous Corporate Aviation or MRO experience is preferred
High school graduate or equivalent required
Experience in leading aviation maintenance projects is preferred
Must have valid driver’s license and acceptable driving record; Respirator Fit qualified; Man Lift qualified; tool inventory per department tool list required
Attendance: Regularly scheduled attendance required; occasional overnight and short notice travel required
Physical: Routinely lifts up to 50 lbs. and occasionally up to 100 lbs.; reads small print; hears sounds associated with mechanical deficiencies; repetitive motion; works with moving parts and vibration; tolerates products, materials and fumes associated with component maintenance; tolerates working in confined spaces and heights above four feet; tolerates walking, bending, kneeling, stooping, crouching, crawling, climbing and sitting
Environmental: Tolerates working in extreme temperatures and in noisy environments
Miscellaneous
About Our Client
Our client is the largest privately owned business jet service provider in the world, known for its dedication to quality and customer service. With a rich history dating back to 1956, our client offers a comprehensive range of services, including airframe and engine maintenance, avionics installations and repair, interior and paint refurbishments, and aircraft sales and acquisitions. Operating from several full-service locations and numerous satellite shops across the United States, our client is committed to providing innovative solutions and maintaining the highest standards in the aviation industry.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
127824232537536
Looking for A&P Mechanics with King Air or Corporate Jet experience near Nashville, TN
Essential Duties and Responsibilities
Will be performing scheduled/non scheduled maintenance and phase inspections.
Will be doing depot work so must have a knowledge of the aircraft from nose to tail.
Candidate should have good solid King Air or Corporate Jet experience.
Requirements
2 years minimum of King Air or Corporate Jet experience
Solid work history required (This is a long term assignment. Applicant’s with short stents of employment over the previous 2 years will not be considered)
Bring all trade specific hand tools to assignment
High School Diploma or GED
Miscellaneous
Tool box MUST be SHADOWED and tools ETCHEDCandidates must report on day 1 with acceptable US Persons documentation per U.S. Export Control Compliance requirements.
About Our Client
Since 1950, our partner has set the standard for excellence in business aircraft sales, service and management. Its rich history began in Greenville, SC and has expanded to additional locations in Nashville, TN & Dayton, OH.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
813409485877568
Under minimal supervision, install fabricated aircraft interiors including cabinetry components, galleys, closets, divans, lavatories, side ledges, bulkheads, trim, panels, carpet and other similar accessories in for the completion of VIP aircraft.
Essential Duties and Responsibilities
Install fabricated aircraft interior components.
Interpret material specs and engineering drawings to ensure installed interiors meets the design spec, quality standards and customer expectations.
Request material needs timely to ensure a continuous workflow.
Adheres to all regulatory documentation regarding proper sign off, component installation, etc. Ensure paperwork is complied with and completed timely in accordance with the client RSQM and other quality standards.
Follows all department safety guidelines and ensure proper usage of tools and equipment.
Intermediate knowledge of company installation procedures, process specs, IOPs, etc.
Other duties as assigned but not covered herein.
Requirements
6+ years Interior Install experience, preferably in the corporate aviation completion environment.
High School Diploma, or GED. Relevant trade school attendance is a plus.
Advanced knowledge of the Interior Installation process as it specifically relates to the corporate aviation industry, in a completions environment.
Ability to read, write, speak, and understand the English language.
Ability to read and interpret blueprints and engineering documentation.
Strong knowledge and expertise with all aspects of the Interior Installation process.
Knowledge of the RSQM and FAA requirements as it relates to Interior Installation.
Working knowledge of computers.
Working knowledge of lean or other continuous improvement opportunity techniques.
Ability to communicate in an assertive yet professional, motivating and tactful manner.
Miscellaneous
The work environment described here is representative of those required by an employee to perform the essential functions of this job with or without reasonable accommodations.
The location where this position works is in the back shop of an aircraft hangar environment which could be subject to weather changes and is subject to constant exposure to loud noise, potential contact with hazardous waste material, heavy machinery and other safety hazards such as cabinets, etc.
PHYSICAL DEMANDS:
The physical demands described here is representative of those required by an employee to perform the essential functions of this job with or without reasonable accommodations.
About Our Client
Our Client is continuously innovating in the large to very large business jet aircraft segment engineering luxury into our cabin completions, upgrades and refurbishments.
Located in Indianapolis, Indiana our client has established itself as one of the most unique and modern completion & service centers in the world exclusively for Airbus Corporate Jets, Boeing Business Jets, Bombardier Business aircraft and Sukhoi Business Jets.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
139773391877577
The Interior Mechanic will be responsible for maintenance and repair of the interior on Commercial Aircraft types.
Essential Duties and Responsibilities
Remove and replace various aircraft components and electrical systems with the use of special tooling and ground support equipment following oral and written instructions such as supervisor’s directives and manuals to complete all routine and non-routine assignments in a timely manner.
Analyze all repairs deciding independent methods and procedures to accomplish assignments.
Research and order aircraft interior and shop parts coordinating activities with purchasing department.
Requirements
1+ years of recent Interior experience
Must have minimum required tools.
Prior experience on Boeing 727/737/747/757/767/777, Airbus 319/320/330 or CRJ/ERJ aircraft
High school diploma or general education degree (GED) required.
Miscellaneous
Candidates must report on first day with 2 forms of acceptable identification to verify employment eligibility. Applicants should plan on one week of orientation/training upon arrival APA offers on site representation Food trucks available daily onsite
About Our Client
Our Client is located at Brookley Aeroplex in Mobile, Alabama, and Pensacola, FL, at the Pensacola International Airport. They are a renowned provider of aircraft maintenance and modification (AMM) services for commercial airlines and air freight operators. They meet their customers' requirements by providing a full spectrum of high-quality, reliable, and timely AMM and engineering solutions. Our client has the know-how and experience to comprehensively manage complex projects, ensuring the customers' aircraft operate safely and efficiently.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
183013828040604
The Avionics technician Sr. (3+ years of experience) is responsible for effectively performing R&E routine work associated with heavy aircraft A, B, C and D checks.
Essential Duties and Responsibilities
Within budgeted or estimated time, repair, modify, install, and perform routine maintenance of all Avionics systems with accuracy and with minimal assistance.
Accurately interpret maintenance manuals, service bulletins, wiring diagrams, system schematics, drawings, engineering orders and other documents from both the customer and company.
Apply deductive reasoning to troubleshoot and repair and/or check complex systems.
Properly utilize Avionics test equipment to perform systems test and keep abreast of new and advanced test equipment and the use of such equipment.
Properly utilized and maintain Avionics hand tools to perform repairs and installations.
Keep leadership and coworkers apprised of work progress and/or problems.
Accurately document work performed as set forth by company and customer maintenance programs on a daily basis using the standard format.
Prepare routine reports and correspondence.
Fabricate per drawings and standard practices wire bundles and assemblies to include marking of wires, properly securing wires into bundles, and termination of wires into a variety of contacts and connectors.
Take immediate corrective action regarding unsafe conditions.
Operate ground support equipment e.g. power carts, HiReach, etc. as required.
Other duties may be assigned.
Requirements
High school diploma or general education degree (GED) required
3+ years previous avionics experience required.
Computer keypunch experience
Must have minimum required tools.
Must be able to obtain SIDA
Miscellaneous
Candidates must report on first day with 2 forms of acceptable identification to e-verify employment eligibility. Candidates will take hands on assessment on day 1 of reporting Applicants should plan on one week of orientation/training upon arrival Onsite gym and wellness facility accessibility at no cost Climate controlled hanger Food trucks available daily onsite
About Our Client
Our client is an independent provider of aviation services to commercial and government customers in more than 100 countries. Our client's aftermarket expertise and award-winning solutions help customers increase efficiency and reduce costs while maintaining high levels of quality, service and safety. Our client’s US network spans from Indianapolis, IN, to Rockford, IL, to Duluth, MN and Oklahoma City OK.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
185684492607321
Under minimal supervision, learn how to use a variety of sheet metal working tools, techniques, and materials to fabricate complex parts and subassemblies for completion of VIP aircraft.
Essential Duties and Responsibilities
Fabricate high quality sheet metal parts I.A.W. client approved procedures.
Must be able to interpret material specs and engineering drawings to ensure fabricated parts meet the design spec, quality standards and customer expectations.
Learn to request material needs from approved data in a timely manner to ensure a continuous workflow.
Must be able to adhere to all regulatory documentation regarding proper sign offs. As well as be able to ensure paperwork is complied with and completed timely in accordance with the RSQM and other quality standards.
Follow all department safety guidelines and ensure proper usage of tools and equipment.
Basic knowledge of company installation procedures, process specs, IOPs, etc.
Other duties as assigned but not covered herein.
Requirements
6+ years sheetmetal fabrication experience experience, preferably in the corporate aviation completion environment.
High School Diploma, or GED. Relevant trade school attendance is a plus.
Basic knowledge of the sheet metal fabrication processes as it specifically relates to the corporate aviation industry, in a completions environment.
Ability to read, write, speak, and understand the English language.
Ability to read and interpret blueprints and engineering documentation.
Basic knowledge and willingness to learn all aspects of the fabrication process.
Willingness to obtain knowledge of the RSQM and FAA requirements as it relates to sheet metal fabrication.
Working knowledge of computers and related software.
Willingness to obtain working knowledge of lean or other continuous improvement opportunity techniques.
Ability to communicate in an assertive yet professional, motivating, and tactful manner.
Miscellaneous
The work environment described here is representative of those required by an employee to perform the essential functions of this job with or without reasonable accommodations.
The location where this position works is in the back shop of an aircraft hangar environment which could be subject to weather changes and is subject to constant exposure to loud noise, potential contact with hazardous waste material, heavy machinery and other safety hazards such as cabinets, etc.
PHYSICAL DEMANDS:
The physical demands described here is representative of those required by an employee to perform the essential functions of this job with or without reasonable accommodations.
About Our Client
Our Client is continuously innovating in the large to very large business jet aircraft segment engineering luxury into our cabin completions, upgrades and refurbishments.
Located in Indianapolis, Indiana our client has established itself as one of the most unique and modern completion & service centers in the world exclusively for Airbus Corporate Jets, Boeing Business Jets, Bombardier Business aircraft and Sukhoi Business Jets.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
179465301647180
Independently perform a variety of aircraft modifications and maintenance functions such as removal and installations of airframes, landing gear, engine components, electrical components, and control systems to assure conformance to procedures, performances and test specifications.
Essential Duties and Responsibilities
Perform required. periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance task within the quoted or standard CMP time.
Provide work direction for assigned technicians.
Promote high standards of quality through instruction and by example setting.
Act on behalf of Mechanical Team Lead (MTL) in his/her absence and assume the duties and responsibilities of the MTL when assigned.
Coordinate with the Inspection department to ensure compliance with internal and FAA inspection and documentation requirements.
Properly complete work order sign-offs, shift turnovers, and other paper work in a timely manner. Ensure that all work accomplished meets quality standards and specifications.
Properly identify (tag) customer property and equipment.
Store aircraft components and other customer property securely and safely.
Follow standard operating procedures and JSAs when operating ground support equipment, such as power supply, hydraulic rigs, nitrogen filler carts, and oxygen service carts.
Operate and supervise use of special support equipment used in removal and installations of major components.
Coordinate movement of aircraft as required.
Assist in training new employees concerning computerized maintenance program (CMP) maintenance manuals, SRMs illustrated parts catalog (IPC) usage, flight test installations, and all maintenance of major components.
Coordinate with other departments to arrange for the overhaul or repair of customer property as needed.
Additional Functions:
Use the material tracking system to create parts demand and to charge labor to correct work orders and item numbers.
Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags.
Implement and apply Lean/continuous improvement processes to all areas of responsibility.
Properly use and maintain company-provided tools and equipment. Return items to designated storage area after use.
In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
Perform other duties as assigned.
Requirements
High School Diploma or GED required.
4 years Aviation Maintenance experience to include 3 years of experience working on mid/large size aircraft required..
Corporate aircraft experience preferred.
Other FAA Airframe and Powerplant Mechanic Certificate required.
Valid Driver’s License required.
Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems within each aircraft product line.
Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.).
Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures.
Must be able to read, write, speak, and understand the English language.
Miscellaneous
About Our Client
Our client has led the evolution of business and personal aviation since the 1958 debut of the world’s first purpose-built business aircraft. Today, they produce the world’s most advanced business aircraft, with innovations from nose to tail and wingtip to wingtip, all while offering unmatched global product support and service.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
178042274664001
Assists in troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality.
Essential Duties and Responsibilities
Essential Functions:
Demonstrates basic technical skills in avionics and aircraft systems operational testing and troubleshooting.
Under supervision, performs the installation and functional testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
Assists in ensuring quality and efficiency of all installations.
Troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems.
Acquires and demonstrates the skills and knowledge required to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring.
Performs and complies with engineering changes and modifications as required.
Assists in set up and operation of necessary test equipment; conducts functional and operational tests to evaluate performance and reliability.
Under supervision, ensures that all work performed on the aircraft is properly and completely documented and ready for inspection.
Tests and maintains test equipment, electronic systems, and components.
Complies with the company FOD program, tool control program, 5-S program and all safety regulations.
Additional Functions:
In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. Perform other duties as assigned.
Requirements
High School Diploma or GED required.
2 years related work experience or two (2) years of accredited schooling in aviation electronics.
Ability to read and interpret basic blueprints and schematic diagrams.
Other Requirements:
Must be able to climb stairs and ladders, work in confined areas and lift up to 50 pounds.
Miscellaneous
About Our Client
Our client has led the evolution of business and personal aviation since the 1958 debut of the world’s first purpose-built business aircraft. Today, they produce the world’s most advanced business aircraft, with innovations from nose to tail and wingtip to wingtip, all while offering unmatched global product support and service.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
177570523150327
As an A&P Mechanic I, you will be responsible for performing routine and non-routine maintenance on commercial aircraft.
Essential Duties and Responsibilities
Perform preventive maintenance, repairs, part replacement and modifications for aircraft
Perform the assigned maintenance task in accordance with the Federal Aviation Regulations, manufacturer’s recommendations, customers approved maintenance program, approved or acceptable data.
Troubleshoot problems, make repairs, and prepare areas for complete inspections.
Perform high quality and airworthy work in accordance with the Task Card instructions provided to them by the Project Manager and/or their Lead.
Become familiar with and follow the requirements of this Repair Station Manual, Federal Aviation Regulations, Airworthiness Directives, advisory circular, manufacturer’s service bulletins and any other required to perform their assigned work.
Never begin any maintenance unless in possession of the proper, current and applicable approved or acceptable data.
Report any difficulties, uncertainties, unserviceable equipment or potential safety hazards to their supervisor and observe all safety precautions in the performance of assigned tasks at all times.
Report any tool issues to stores and ensure the correct tag is attached and properly completed.
Take part in any required training including GMM and safety.
Proven ability to work alone and in a team environment.
Requirements
0-3 years aircraft maintenance experience
A&P License
Have own tools
Adhere to standard procedures and policies.
Accurately and legibly, record the maintenance or alteration on the proper repair station and/or customer supplied forms including their signature or initials and employee number.
Able to perform intermediate/heavy maintenance tasks with little supervision.
Perform flight control and engine throttle rigging.
Miscellaneous
Tools are required
About Our Client
Our client hosts maintenance facilities in Calgary, Canada, Great Falls, MT and Jacksonville, FL providing complete maintenance, interiors refurbishment and storage capabilities for regional airlines, manufacturers and aircraft leasing companies.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
137826002355305
