Jobs Available

101 - 110 of 207 Matches
Featured job

Avionics Technician

Midwest (Kansas City, MO)
Posted on 4/19/2024

Performs routine repairs, checks and installations of all Avionics systems on the aircraft while under minimal supervision.

Essential Duties and Responsibilities

Within budgeted or estimated time, repair, modify, install, and perform routine maintenance of all Avionics systems with accuracy and with minimal assistance. Accurately interpret maintenance manuals, service bulletins, wiring diagrams, system schematics, drawings, engineering orders and other documents from both the customer and ATS. Apply deductive reasoning to troubleshoot and repair and/or check complex systems. Properly utilize avionics test equipment to perform systems test and keep abreast of new and advanced test equipment and the use of such equipment. Properly utilized and maintain Avionics hand tools to perform repairs and installations. Keep leadership and co-workers apprised of work progress and/or problems. Accurately document work performed as set forth by ATS and customer maintenance programs on a daily basis using the standard format. Prepare routine reports and correspondence. Fabricate per drawings and standard practices wire bundles and assemblies to include marking of wires, properly securing wires into bundles, and termination of wires into a variety of contacts and connectors. Take immediate corrective action regarding unsafe conditions. Regular and predictable attendance. Effective and appropriate conduct with co-workers. Operate ground support equipment e.g. power carts, Hi-Reach, etc. as required. Other duties may be assigned.

Requirements

High school diploma or GED AND one year as an ATS Avionics Apprentice Technician I; OR three years relevant related avionics experience on heavy commercial or regional aircraft; OR equivalent combination of education and experience/training. Airframe license is desired Ability to communicate effectively with other maintenance personnel at all levels regarding all job-related issues both verbally and in writing. Must have working knowledge of Avionics systems and their operation and the proven ability to troubleshoot basic problems. Must have broad, overall knowledge of other aircraft systems e.g. hydraulic, flight controls, etc. and major components. Ability to perform basic to intermediate mathematical functions such as add, subtract, divide in units of measure and ability to compute rate, rations and percentages. Demonstrated ability to research proper hand-tools utilizing standard wiring practices manuals

Miscellaneous

About Our Client

This client is headquartered in Everett, Washington, with additional operations in Moses Lake, Washington; Kansas City, Missouri; and Fort Worth, Texas. This national MRO network provides seamless support for military, commercial and regional aircraft operators – including airframe maintenance, component repair, engineering support, fuselage painting, and business jet services.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

734121809475324

Featured job

AOG Mechanic Sr.

Southeast (Chattanooga, TN)
Posted on 4/19/2024

APA Services is seeking to hire Senior AOG Mechanics for a long term opportunity in Chattanooga, TN

Essential Duties and Responsibilities

Will work 7 on and 7 off Must be able to pass client's insurance carrier to be allowed to drive the AOG trucks. no DUI, reckless driving charges, or excessive points Under minimal supervision perform a variety of air frame and powerplant service, modification and completion functions. Working on corporate aircraft doing Depot level maintenance, so must have a knowledge of the aircraft from nose to tail. Conduct operational checks on all aircraft systems such as landing gear, engine components, electrical components, control systems including APU operations. Will be performing scheduled/non scheduled maintenance and phase inspections. Candidate should have good solid corporate aircraft experience and an A&P License is required.

Requirements

5+ years’ AOG experience on at least THREE of the following aircraft...Bombardier Challenger 300/350/600, Bombardier Global 5000/5500/6000, Citation Latitude/Sovereign/XLS, Phenom 300, King Air 200/300/350, Legacy 4500/500, Praetor Tools and Truck will be provided Solid work history required (This is a long term assignment. Applicant’s with short stents of employment over the previous 2 years will not be considered) High School Diploma or GED

Miscellaneous

no tools MUST HAVE CLEAN DRIVING RECORD

About Our Client

Since 1950, our partner has set the standard for excellence in business aircraft sales, service and management. Its rich history began in Greenville, SC and has expanded to additional locations in Nashville, TN & Dayton, OH.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

725909578275709

Featured job

Sheetmetal Mechanic

Southeast (Greenville, SC)
Posted on 4/19/2024

APA Services is seeking to hire several Senior Sheetmetal Mechanics for a long term opportunity in Greenville, SC

Essential Duties and Responsibilities

Advanced knowledge of Sheet-Metal fabrication, Sheet-Metal Installation, Sheet-metal Lay-out, Sheet-metal part fabrication Forming complex angles and configurations, Sheet-metal Forming, drilling, stamping, shaping, bending, punching Sheet-metal cutting, riveting, filing and dimpling, Install Sheet-metal parts, install fabricated items on aircraft Read Engineering specifications, Read Blueprints

Requirements

5+ years’ experience All candidates must have 1 year experience on corporate aircraft. Applicants should bring all trade specific hand tools to this assignment Solid work history required (This is a long term assignment. Applicant’s with short stents of employment over the previous 2 years will not be considered) High School Diploma or GED

Miscellaneous

Tool box MUST be shadowed and tools ETCHED. Candidates must report on day 1 with acceptable US Persons documentation per U.S. Export Control Compliance requirements.

About Our Client

Since 1950, our partner has set the standard for excellence in business aircraft sales, service and management. Its rich history began in Greenville, SC and has expanded to additional locations in Nashville, TN & Dayton, OH.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

464732863057418

Temp Fabricator Assembler

South Central (Tulsa, OK)
Posted on 4/19/2024

Applies basic and some advanced technical skills and knowledge to perform various production operations to fabricate, assemble and repair metallic and nonmetallic parts and assemblies for aerospace industry applications.

Essential Duties and Responsibilities

Lays out and marks dimensions and reference lines on material with or without templates or shop aides. Routes, saws, drills or otherwise change and add value to detail parts and subassemblies according to work instructions. Uses hand and power tools such as routers, drill motors, die grinders and other like tools to complete the required operations called out in the work instructions. Trims parts to fit and files, grinds, deburrs, bevels edges, polishes surfaces and other wise finishes out the material, part or assembly to specifications. Assembles detail parts into subassemblies and complete assemblies using written and verbal work instructions. Installs rivets, bolts, screws and clips and prepares and applies adhesives. Inspects assemblies and installation for conformance to specifications. Operates production machines and equipment such as hot or cold presses, band saws, and other like production machines to fabricate parts, components and material for production uses. Reviews production and process documentation and production scheduling and planning and assist in expediting the flow of material, parts and assemblies.

Requirements

Two (2) to four (4) or more years of experience in fabrication and assembly of metallic and non-metallic parts used on operational aircraft, or equivalent combination of education, training and experience.

Miscellaneous

About Our Client

This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

701211386003066

Featured job

A&P Mechanic III

Midwest (Great Falls, MT)
Posted on 4/19/2024

As an A&P Mechanic I, you will be responsible for performing routine and non-routine maintenance on commercial aircraft.

Essential Duties and Responsibilities

Perform preventive maintenance, repairs, part replacement and modifications for aircraft Perform the assigned maintenance task in accordance with the Federal Aviation Regulations, manufacturer’s recommendations, customers approved maintenance program, approved or acceptable data. Troubleshoot problems, make repairs, and prepare areas for complete inspections. Perform high quality and airworthy work in accordance with the Task Card instructions provided to them by the Project Manager and/or their Lead. Become familiar with and follow the requirements of this Repair Station Manual, Federal Aviation Regulations, Airworthiness Directives, advisory circular, manufacturer’s service bulletins and any other required to perform their assigned work. Never begin any maintenance unless in possession of the proper, current and applicable approved or acceptable data. Report any difficulties, uncertainties, unserviceable equipment or potential safety hazards to their supervisor and observe all safety precautions in the performance of assigned tasks at all times. Report any tool issues to stores and ensure the correct tag is attached and properly completed. Take part in any required training including GMM and safety. Proven ability to work alone and in a team environment.

Requirements

8+ years aircraft maintenance experience A&P License Have own tools Adhere to standard procedures and policies. Accurately and legibly, record the maintenance or alteration on the proper repair station and/or customer supplied forms including their signature or initials and employee number. Able to perform intermediate/heavy maintenance tasks with little supervision. Perform flight control and engine throttle rigging.

Miscellaneous

Tools are required

About Our Client

Our client hosts maintenance facilities in Calgary, Canada, Great Falls, MT and Jacksonville, FL providing complete maintenance, interiors refurbishment and storage capabilities for regional airlines, manufacturers and aircraft leasing companies.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

515150281950744

Featured job

Lead Avionics Technician

Midwest (Great Falls, MT)
Posted on 4/19/2024

Seeking a Lead Avionics Technician in Great Falls, MT

Essential Duties and Responsibilities

Assign and schedule tasks to technicians based on skill set, as directed by the Project Manager and in accordance with company policies and procedures. Monitor workers allocated to his/her control and provide clear on the job instructions. Provide On-The-Job training, orientation and direction to apprentices and technicians. May delegate this function to qualified technicians. Execute the project plan for your area of expertise as provided by the Project Manager. Manage the work scope for your area of expertise within the project budget as set out by the Project Manager. Review work cards for your area of expertise and ensure that the Work Package reflects the actual status of the project. Carry out tasks on the aircraft when all other Lead Technician duties are accomplished. Provide technical assistance and guidance to the technicians on the crew. Ensure all partial work documentation is completed. The documentation should allow the status of a work card to “stand alone” without relying on other means (example; post-it notes, etc.). Partial work documentation includes continuation sheets, service bulletins used as continuation sheets, shift turnover reports, etc. Verify daily time cards. Responsible to ensure that crew members are billing their time to projects appropriately and that all time is accounted for. Responsible to ensure crew members are working productively throughout the duration of their shift. Responsible to ensure crew members follow company policies and procedures including evaluating the quality of work with his/her team. Make certain his/her team members comply with safety policies and procedures. Ensure equipment being used to perform required tasks is acceptable, serviceable and handled in a safety conscious manner. Responsible to ensure work environment is safe and clean, and maintain work area and equipment in a clean and orderly condition.

Requirements

Must have 10+ years hands on recent avionics experience with at least 2+ recent years in a leadership role. A&P License Must possess basic computer skills using the English language. Must be able to read and interpret blueprints. Thorough knowledge of avionics operation and test equipment required for functional checks and troubleshooting. Must have own tools High School Diploma or equivalent

Miscellaneous

Tools are required

About Our Client

Our client hosts maintenance facilities in Calgary, Canada and Great Falls and Jacksonville, USA providing complete maintenance, interiors refurbishment and storage capabilities for regional airlines, manufacturers and aircraft leasing companies.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

701048222269938

Featured job

Aircraft Inspector

Southeast (Dothan, AL)
Posted on 4/19/2024

The Aircraft Inspector will conduct all required inspections in accordance with the applicable Federal Aviation Regulations, manufacturer’s approved data, any customer’s approved program data.

Essential Duties and Responsibilities

Conduct all required inspections in accordance with the applicable Federal Aviation Regulations, manufacturer’s approved data, any customer’s approved program data, and the policies and procedures contained in this Inspection Procedures Manual. Record the results of all inspections performed on the proper inspection forms used by the repair station in accordance with this Inspection Procedures Manual. Be thoroughly familiar with the applicable Federal Aviation Regulations, specifications, tolerances, limits, inspection methods, techniques, and equipment used in their area of responsibility to determine the quality of the work performed and the airworthiness of the article. Maintain proficiency with various types of inspection aides used for the inspection of a particular item. Ensure current specifications involving inspection tolerances, limits, and procedures recommended by the manufacturer of the product undergoing inspection and other forms of applicable inspection information are available for reference. Other examples of inspection information would be FAA Airworthiness Directives, manufacturer’s bulletins, approved customer data, and Federal Aviation Regulations. Make final airworthiness determination prior to “Return of Service” on items they are authorized to inspect for any article maintained or altered by this repair station. Reject any work or parts that have not been properly maintained or altered in accordance with Federal Aviation Regulations, manufacturer’s approved data, customer approved data and the policies and procedures contained within this manual. Support the company Safety Program

Requirements

Minimum 5 years’ experience as an Inspector or Structural or Aircraft Technician, Heavy Commercial experience REQUIRED. Active A&P License required. Preferred 737, MD80 Experience. Must have own tools Must be able to read, write and speak the English language.

Miscellaneous

Candidates must report on day 1 with 2 forms of acceptable identification to identify employment eligibilityInspectors are required to report on day 1 with all training recordsInspectors will be sent for an eye exam upon arrival

About Our Client

Our Client provides turn-key aircraft maintenance, repair and overhaul (MRO) services for a wide array of commercial and military aircraft. As an independent FAA EASA approved repair station, our client’s services include scheduled and non-scheduled passenger airlines, cargo operators and leasing company’s maintenance.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

521998137038418

Featured job

Lead A&P Mechanic

Midwest (Great Falls, MT)
Posted on 4/19/2024

As a Lead A&P Mechanic you will be responsible for supervising and performing routine and non-routine maintenance on commercial aircraft.

Essential Duties and Responsibilities

Assign and schedule tasks to technicians based on skill set, as directed by the Project Manager and in accordance with company policies and procedures. Monitor workers allocated to his/her control and provide clear on the job instructions. Provide On-The-Job training, orientation and direction to apprentices and technicians. May delegate this function to qualified technicians. Execute the project plan for your area of expertise as provided by the Project Manager. Manage the work scope for your area of expertise within the project budget as set out by the Project Manager. Review work cards for your area of expertise and ensure that the Work Package reflects the actual status of the project. Carry out tasks on the aircraft when all other Lead Technician duties are accomplished. Provide technical assistance and guidance to the technicians on the crew. Ensure all partial work documentation is completed. The documentation should allow the status of a work card to “stand alone” without relying on other means (example; post-it notes, etc.). Partial work documentation includes continuation sheets, service bulletins used as continuation sheets, shift turnover reports, etc. Verify daily time cards. Responsible to ensure that crew members are billing their time to projects appropriately and that all time is accounted for. Responsible to ensure crew members are working productively throughout the duration of their shift. Responsible to ensure crew members follow company policies and procedures including evaluating the quality of work with his/her team. Make certain his/her team members comply with safety policies and procedures. Ensure equipment being used to perform required tasks is acceptable, serviceable and handled in a safety conscious manner. Responsible to ensure work environment is safe and clean, and maintain work area and equipment in a clean and orderly condition.

Requirements

10+ years aircraft maintenance experience with at least 2+ recent years in a leadership role. A&P License Have own tools Adhere to standard procedures and policies. Accurately and legibly, record the maintenance or alteration on the proper repair station and/or customer supplied forms including their signature or initials and employee number. Able to perform intermediate/heavy maintenance tasks with little supervision. Perform flight control and engine throttle rigging.

Miscellaneous

Tools are required

About Our Client

Our client hosts maintenance facilities in Calgary, Canada, Great Falls, MT and Jacksonville, FL providing complete maintenance, interiors refurbishment and storage capabilities for regional airlines, manufacturers and aircraft leasing companies.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

545138953703414

Featured job

A&P Mechanic III

Southeast (Dothan, AL)
Posted on 4/19/2024

A&P Mechanic III is responsible for performing routine and non-routine maintenance on commercial aircraft.

Essential Duties and Responsibilities

Perform preventive maintenance, repairs, part replacement and modifications for aircraft Perform the assigned maintenance task in accordance with the Federal Aviation Regulations, manufacturer’s recommendations, customers approved maintenance program, approved or acceptable data. Troubleshoot problems, make repairs, and prepare areas for complete inspections. Perform high quality and airworthy work in accordance with the Task Card instructions provided to them by the Project Manager and/or their Lead. Become familiar with and follow the requirements of this Repair Station Manual, Federal Aviation Regulations, Airworthiness Directives, advisory circular, manufacturer’s service bulletins and any other required to perform their assigned work. Never begin any maintenance unless in possession of the proper, current and applicable approved or acceptable data. Ensure that the issued Task Card is properly scanned together with the Technician’s information before beginning the assigned task(s). Adhere to standard procedures and policies. Accurately and legibly, record the maintenance or alteration on the proper repair station and/or customer supplied forms including their signature or initials and employee number. Report any difficulties, uncertainties, unserviceable equipment or potential safety hazards to their supervisor and observe all safety precautions in the performance of assigned tasks at all times. Report any tool issues to stores and ensure the correct tag is attached and properly completed. Take part in any required training including GMM and safety. Proven ability to work alone and in a team environment. Able to perform intermediate/heavy maintenance tasks with little supervision. Perform flight control and engine throttle rigging. Able to use FAA approved data (i.e. IPC, M/M, OHM, SRM) proficiently.

Requirements

Minimum 5 years aircraft technician experience. 737/ MD80 Experience Required. A320 experience, preferred. Active A&P License Must Have Own Tools Must be able to read, write and speak the English language.

Miscellaneous

Candidates must report on the first day with 2 forms of acceptable identification (same used for new hire paperwork) to identify employment eligibility. Written and practical test will be given on day one.

About Our Client

Our Client provides turn-key aircraft maintenance, repair and overhaul (MRO) services for a wide array of commercial and military aircraft. As an independent FAA EASA approved repair station, our client’s services include scheduled and non-scheduled passenger airlines, cargo operators and leasing company’s maintenance.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

698788503256931

Featured job

Systems Mechanic (Completions)

Midwest (Indianapolis, IN)
Posted on 4/19/2024

Under minimal guidance; plans, lays’ out, fabricates, installs, assembles, repairs, operates, tests and troubleshoots systems on VIP aircraft in accordance with technical manuals, engineering drawings, and FAA regulations and assumes a leadership role by providing routine instructions on work tasks, blueprints and OJT for junior level technicians. Systems to include oxygen, environmental control, ventilation, smoke detection, equipment cooling, potable water, gray water and waste water systems.

Essential Duties and Responsibilities

Read, interpret and understand blueprints and other documents to accurately determine and plan the work steps to be performed. Fabricate and install systems parts and assemblies per engineering drawing or structural repair manual. Perform the operations of testing and troubleshooting aircraft systems utilizing an educational level of knowledge, skills and understanding about integrated systems. Anticipate, specify, develop, implement, and maintain tools (including test automation tools) used on aircraft systems. Provides OJT and guidance to junior level technicians. Work directly with Engineering to help facilitate installs. Observes company rules and regulations, including housekeeping and proper use of safety methods and the safe operation of equipment. Adheres to all recordkeeping requirements and paperwork to ensure work is performed in accordance with stated documents. Complete all sign off’s and component removal/installation sheets at time task is performed but prior to end of shift. Utilize all resources available to accurately perform the work steps in a safe and timely manner. Ensure a tidy, safe and productive work environment which is conducive to properly performing the tasks at hand. Other duties as assigned not specifically stated herein.

Requirements

High school diploma or GED, plus a technical training/diploma/certificate in aircraft mechanics, or aeronautics from at least a 2 year technology institution plus 3 years of applicable experience in the same or similar job in the military or within the aviation industry. A&P preferred, but not required. Prefer to have 2 -5 years of STC experience Final 03/2020 OR 6 years of applicable experience guiding junior technicians, working directly with other departments, reading blueprints, fabricating and installing systems parts and assemblies, and troubleshooting and testing aircraft systems in the same or similar job in the military or within the aviation industry. Early sheet metal experience a plus. Minor composite repair with wet layout. Ability to install rivets. Basic understanding of gray water/ potable water/ vacuum waste systems. Basic understanding of air condition duct systems with the ability to modify existing tubes and hoses to meet blue print specs. Basic ability to swedge hard lines and ability to perform burst and proof testing. Strong ability to provide verbal and written communication. Proficiently able to read, interpret and understand blueprints. Must be self starting and motivated with the desire to learn Proficient ability to apply the use of routine to complex mathematical problems to solve work issues. Demonstrated ability to comprehend and retain OJT. Must possess a proficient mechanical aptitude. Must have the ability to read measuring devices such as a scale or caliper or other required tools. Must have close tolerance experience. Ability to use basic shop equipment (drill press, band saw, sander, etc.). Ability to use basic hand tools (grinder, drill motor, wrenches, etc.).

Miscellaneous

The work environment described here is representative of those required by an employee to perform the essential functions of this job with or without reasonable accommodations. The location where this position works is in the back shop of an aircraft hangar environment which could be subject to weather changes and is subject to constant exposure to loud noise, potential contact with hazardous waste material, heavy machinery and other safety hazards such as cabinets, etc. PHYSICAL DEMANDS: The physical demands described here is representative of those required by an employee to perform the essential functions of this job with or without reasonable accommodations.

About Our Client

Our Client is continuously innovating in the large to very large business jet aircraft segment engineering luxury into our cabin completions, upgrades and refurbishments. Located in Indianapolis, Indiana our client has established itself as one of the most unique and modern completion & service centers in the world exclusively for Airbus Corporate Jets, Boeing Business Jets, Bombardier Business aircraft and Sukhoi Business Jets.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

802124576790947

Benefits of working with APA Services

Weekly Payroll, Medical Insurance Available, Cash Advances, Travel Pay and/or bonuses on Select Contracts.
We know it takes great people to do great work, so if you're interested in joining the APA Services family, give us a call at:

(817)529-4000

Thanks for taking the time to visit APA Services and we look forward to working with you soon.

Browse All Jobs