Find the right job for your preferred location and specialty
Jobs Available
51 - 60 of 169 Matches
Fabricate, develop, build, sew, and cover aircraft soft goods through the knowledge and skills of aircraft upholstery via Dassault Falcon Jet standards while using 3D models, drawings, blueprints, IDEI drawings, and/or spec control prints following Dassault Quality standards. Soft goods include crew seats, passenger seats, divans, side ledges, headliners and other assorted interior soft goods.
Essential Duties and Responsibilities
Interpret blueprints, completion drawings, company standards, work instructions, 3D model information.
Perform proper maintenance practices in accordance to DFJ FPS, “F” standards and Quality standards, such as proper glue application, adhesive bonding, and hardware.
Correct handling and use of all required tools specific to the current job assignment.
Correct handling and use of all required chemicals and adhesives related to the current job assignment, including general knowledge and ability on retrieving data from the MSDS safety books.
Position will primarily have one area of focus: Seat Covering
Disassemble and reassemble vendor passenger seats and divans in accordance with the guidelines of the vendor component maintenance manuals, and other seat and divan vendors.
Requirements
High school diploma or equivalent
Experience in Upholstery, Sewing, or related.
Able to align intricate or elaborate designs in fabrics.
Must not be allergic to chemical, solvents, paints, adhesives, natural or manmade materials, fabrics, or feathers.
Basic computer skills.
Able to work in confined spaces and in unusual positions.
Able to lift and transport up to 40 lbs. with or without reasonable accommodation
Visual capacity and muscular dexterity to work on fine detail, high cost products with a minimum of errors and rework.
Able to stock and remove materials from bins above storage level according to OSHA standards.
Preferred - Aircraft upholstery fabrication experience
Preferred - Ability to solve practical problems when needed.
Preferred - Able to interpret a variety of instructions furnished in written, oral, or diagram form.
Preferred - Manufacturing, vocational, tech school training, and/or related college credits.
Preferred - Computer and/or software training or experience.
Preferred - Able to work from documentation such as MES, FPS, WI, blueprints, drawings, F-standards, preparation packages, etc.
Preferred - Courses in state or federal vocational technical upholstery programs
Miscellaneous
WORKING CONDITIONS: Factory/manufacturing environment subject to high noise levels, adhesive or chemical odors, dust, and normal climate control.
About Our Client
Our partner is a French aerospace company with proven dual expertise as a manufacturer of both military aircraft and business jets. They are a pioneer in the use of CATIA™, the 3D CAD / CAM system that has become a global standard. They are a creator of more than 100 prototypes in the last century, with over 10,000 aircraft delivered to 90 countries.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
338965189232897
Applies basic, and some intermediate technical skills and knowledge to set up and operate the process equipment used to stretch, saw, grind and polish and otherwise complete the processing of acrylic billets into finished acrylic sheets of material for use in making transparencies for operational aircraft applications.Essential
Essential Duties and Responsibilities
Performs routine developmental learning assignments and applies standard solutions to work situations of a routine or repetitive nature. May perform a variety of routine duties related to the area to which assigned.Performs tasks and operate machines and equipment that are required to process acrylic material used to make transparencies into parts and assemblies such as wing tip lenses, flight deck, passenger cabin and helicopter windows used on operational aircraft.Reads blueprint, work instructions and planning documents to understand the specifications that are needed to produce quality material. Determine how such items as oven temperature, heating time, dimensions, tolerances, material cutting, polish machine speeds, holding fixtures, and other operations affect the outcome of the production process.Prepares acrylic billet material for the pre-stretch heating cycle. Places prepared billets into the oven using various types of material handling equipment and set the temperature controls. Lifts and positions heated material into the holding fixture, sets the machine controls and completes the stretching process.Operates band saw to cut material to size indicated on the planning documents. Places material to be cut onto the saw table surface using various types of material handling equipment. Starts machine and activate controls to complete the sawing process.Places stretched acrylic material on the grinding/polishing table using various types of material handling equipment. Activates vacuum hold down equipment and ensure material is held immovable to the grind/polish machine table. Adjust machine controls to bring polishing wheel into contact with the material. Turns valves to regulate flow of water into polishing head and starts machine.Examines finished material to determine conformance of finish and deformities specifications. Mark or otherwise indicate non-conforming areas of the finished acrylic sheet.Replaces worn grinding and surface conditioning discs and maintains machine in operating condition.Ancillary Job Functions and Responsibilities:Performs other duties as required. These duties may include assignments in job classifications other than the primary assignment.
Requirements
Skills and Work Requirements :
Any kind of mechanical inclination that allows them to read a tape measure and cut parts. Manufacturing and machine use would be helpful for stretch and polish. Able to cross train throughout the area.
Miscellaneous
About Our Client
This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
187101848960410
Applies basic, and some intermediate technical skills and knowledge to set up and operate the process equipment used to stretch, saw, grind and polish and otherwise complete the processing of acrylic billets into finished acrylic sheets of material for use in making transparencies for operational aircraft applications.Essential
Essential Duties and Responsibilities
Performs routine developmental learning assignments and applies standard solutions to work situations of a routine or repetitive nature. May perform a variety of routine duties related to the area to which assigned.Performs tasks and operate machines and equipment that are required to process acrylic material used to make transparencies into parts and assemblies such as wing tip lenses, flight deck, passenger cabin and helicopter windows used on operational aircraft.Reads blueprint, work instructions and planning documents to understand the specifications that are needed to produce quality material. Determine how such items as oven temperature, heating time, dimensions, tolerances, material cutting, polish machine speeds, holding fixtures, and other operations affect the outcome of the production process.Prepares acrylic billet material for the pre-stretch heating cycle. Places prepared billets into the oven using various types of material handling equipment and set the temperature controls. Lifts and positions heated material into the holding fixture, sets the machine controls and completes the stretching process.Operates band saw to cut material to size indicated on the planning documents. Places material to be cut onto the saw table surface using various types of material handling equipment. Starts machine and activate controls to complete the sawing process.Places stretched acrylic material on the grinding/polishing table using various types of material handling equipment. Activates vacuum hold down equipment and ensure material is held immovable to the grind/polish machine table. Adjust machine controls to bring polishing wheel into contact with the material. Turns valves to regulate flow of water into polishing head and starts machine.Examines finished material to determine conformance of finish and deformities specifications. Mark or otherwise indicate non-conforming areas of the finished acrylic sheet.Replaces worn grinding and surface conditioning discs and maintains machine in operating condition.Ancillary Job Functions and Responsibilities:Performs other duties as required. These duties may include assignments in job classifications other than the primary assignment.
Requirements
Skills and Work Requirements :
Any kind of mechanical inclination that allows them to read a tape measure and cut parts. Manufacturing and machine use would be helpful for stretch and polish. Able to cross train throughout the area.
Miscellaneous
About Our Client
This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
557093335570802
Applies basic, and some intermediate technical skills and knowledge to perform various production operations to fabricate, assemble and repair metallic and nonmetallic parts and assemblies for aerospace industry applications.
Essential Duties and Responsibilities
Performs routine developmental learning assignments and applies standard solutions to work situations of a routine or repetitive nature. May perform a variety of routine duties related to the area to which assigned.
Uses hand and power tools such as routers, drill motors, die grinders and other like tools to complete the required operations called out in the work instructions.
Trims parts to fit and files, grinds, deburrs, bevels edges, polishes surfaces and other wise finishes out the material, part or assembly to specifications.
Assembles detail parts into subassemblies and complete assemblies using written and verbal work instructions.
Installs rivets, bolts, screws and clips and prepares and applies adhesives.
Inspects assemblies and installation for conformance to specifications.
Operates production machines and equipment such as hot or cold presses, band saws, and other like production machines to fabricate parts, components and material for production uses.
Reviews production and process documentation and production scheduling and planning and assist in expediting the flow of material, parts and assemblies.
Requirements
High School Diploma or GED
Must be able to use small hand tools and machinery
Previous manufacturing experience preferred.
Miscellaneous
About Our Client
This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
183227761005862
Applies basic, and some intermediate technical skills and knowledge to perform various production operations to fabricate, assemble and repair metallic and nonmetallic parts and assemblies for aerospace industry applications.
Essential Duties and Responsibilities
Performs routine developmental learning assignments and applies standard solutions to work situations of a routine or repetitive nature. May perform a variety of routine duties related to the area to which assigned.
Uses hand and power tools such as routers, drill motors, die grinders and other like tools to complete the required operations called out in the work instructions.
Trims parts to fit and files, grinds, deburrs, bevels edges, polishes surfaces and other wise finishes out the material, part or assembly to specifications.
Assembles detail parts into subassemblies and complete assemblies using written and verbal work instructions.
Installs rivets, bolts, screws and clips and prepares and applies adhesives.
Inspects assemblies and installation for conformance to specifications.
Operates production machines and equipment such as hot or cold presses, band saws, and other like production machines to fabricate parts, components and material for production uses.
Reviews production and process documentation and production scheduling and planning and assist in expediting the flow of material, parts and assemblies.
Requirements
High School Diploma or GED
Must be able to use small hand tools and machinery
Previous manufacturing experience preferred.
Miscellaneous
About Our Client
This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
509296172614655
The Aircraft Mechanic troubleshoots, repairs, inspects and performs maintenance on commercial aircraft. Performs and documents all work performed per appropriate manuals and regulations as required.
Essential Duties and Responsibilities
Adhere to clients General Work Requirements
Comply with Environmental / Health / Safety policies and procedures
Participate in 5-S activities
Perform all work in a safe and timely manner
Troubleshoot, repair, install, inspect and perform maintenance on customer aircraft
Perform and document work performed per appropriate manuals and regulations as required
Operate ground support equipment as required
Perform mechanical / electrical removals and installations
May assist with maintenance at off-site locations
Assist in providing time estimates
Assist in performing complex repairs on aircraft systems
Perform other duties as assigned
Requirements
Minimum of 3 years’ work experience as an Aircraft Technician.
MRO/Heavy Maintenance experience OR CRJ airframe experience is REQUIRED.
Military aircraft maintenance experience (Depot/Isochronal/Phase inspections) is a plus.
FAA Airframe (A) license required.
Must possess their own tools.
Ability to effectively communicate in English aircraft maintenance actions both verbally and in writing.
Must be comfortable with 12-hour shift work, which includes days / nights and weekends.
Miscellaneous
About Our Client
For over 130 years our client innovative and integrated solutions have demonstrated our commitment to creating a positive social impact around the globe. Our range of products and services are tailored to meet our customers’ evolving needs across the commercial aviation, energy, transportation and infrastructure, machinery, defense and space systems sectors.
Our culture embraces diversity and cooperation, and we promote a healthy balance of professional and personal development, ensuring that your ideas and expertise are valued and respected.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
635265999277331
This Sheetmetal Mechanic is responsible for fabricating, repairing, replacing, or rebuilding aircraft structures, repair parts, and special tools, in accordance with policies, procedures, requirements, and specifications established by the company, applicable government agencies, and aircraft manufactures as contained in approved Maintenance Manuals.
Essential Duties and Responsibilities
Must have working knowledge and the ability to fabricate, repair, replace, or rebuild aircraft structures, repair parts, and special tools. Heavy phase maintenance experience on other military aircraft types may be considered.
Works according to written and/or verbal instructions.
Performs all work assigned in accordance with approved maintenance procedures.
Records work performed and assumes responsibility for that work as indicated by his/her signature.
Uses blueprints, schematics, technical drawings, and Maintenance Manuals in performance of assigned duties.
Performs touch up painting as needed (within task area).
May do experimental and developmental work as assigned.
Requirements
Two (2) years’ experience in heavy aircraft maintenance, preferably with an airline and/or MRO aircraft company.
Must have thorough working knowledge of all forms and documents required to support heavy maintenance service, including, but not limited to Company policy and procedure manuals, FAR’s, AD’s, Service Bulletins, and Maintenance Manuals.
Able to read and interpret technical manuals, instructions, blueprints, and drawings.
Efficient in the use and application of tools, gauges, instruments, etc. necessary for the accomplishment of duties assigned.
Must have an understanding and working knowledge of hazardous material handling and disposal as related to the job assignment.
Valid and current Airframe and Powerplant license REQUIRED.
Must have minimum required tools.
Meet the qualifications to obtain a SIDA badge.
High School diploma or equivalent.
Miscellaneous
MUST be able to pass a 10 year federal background check in order to obtain an airport security badgeEach candidate tracking in will receive either an Airbus Training or Boeing Training (Gen Fam); at no cost to the employee
About Our Client
On the MRO side of the business, our client provides best-in-class services ranging from light repairs to full heavy maintenance visits. On the cargo conversion side, our client provides the very best technical solutions at sensible economics to ensure that freighter operators have sustainable market advantages.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
556267450215362
Assemble and complete the most complex aircraft cabinet components at or above the expected standards of safety, quality, schedule and cost, using engineering and industrial definitions, procedures and guidelines that support the delivery to the aircraft for all aircraft models. Foster positive work environment, mentor more junior co-workers and fill in for Team Leader when necessary.
Essential Duties and Responsibilities
Consistently performs at or above the expected standards of safety, quality, schedule and cost
Works with engineering and industrial definition using 2D/3D data, company standards and work instructions to build aircraft cabinet components
Mentors more junior co-workers or contractors to be efficient and increase their quality of work
Proposes and supports continuous improvement to management and co-workers
Fosters ACE values with peers and help create a work environment aimed at operational excellence
Performs quality checks of fabricated items performing both self and peer checks.
Selects materials from stock to manufacture parts and maintain traceability of materials
Communicate and interact well with co-workers and management
Uses expertise to save potential lost time or possible scrap when rework is required
Successfully performs rework at the aircraft in a timely manner being aware of the aircraft delivery schedule
Handles finished, plated and painted parts in accordance with company standards and procedures
Maintains a clean and organized work area
Leads by example, and mentors and trains junior employees on specific job assignments as directed by the Team Leader
Fills in for Team Leader when necessary
Works in a safe manner in accordance with OSHA and company safety procedures
Performs cleaning of any equipment as needed
Performs all other duties as assigned
Requirements
High school diploma or equivalent
5 years’ experience in aircraft cabinetry, carpentry or fabrication
Proficient in all the following areas with low or no rework
Sub assembly
Mortise and Tenon (must be qualified), most complex carcass assemblies
Veneer and laminate application
Final assembly and cabinet installation
Able to work custom inlays, mirror and exotic assemblies
Able to set up and operate all standard equipment or tools
Good working knowledge of math and geometry; able to work in both metric and imperial units of measure
Strong communication skills
Know the importance of schedules and budgets and helps team achieve objectives
Computer proficient
Able to lift and transport up to 50 lbs. with or without a reasonable accommodation
Must have visual capacity and muscular dexterity to work on fine detail, high cost products with a minimum of errors and rework.
Able to work with engineering and industrial definition using 2D/3D data, company standards and work instructions to build aircraft cabinet components
Able to solve practical problems
Able to interpret a variety of instructions furnished in written, oral, or diagram form
Miscellaneous
WORKING CONDITIONS: Typical factory environment. May work in areas with high noise levels. Must be able to work with company’s approved adhesives and chemicals and be exposed to cabinet shop sanding dust.
About Our Client
Our partner is a French aerospace company with proven dual expertise as a manufacturer of both military aircraft and business jets. They are a pioneer in the use of CATIA™, the 3D CAD / CAM system that has become a global standard. They are a creator of more than 100 prototypes in the last century, with over 10,000 aircraft delivered to 90 countries.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
300190695021682
Perform quality aircraft maintenance and/or repairs within budgeted time in compliance with all applicable Code of Federal Regulations, Repair Station Procedures, customer requirements, and manufacturer's recommendations. Organize work plan in an efficient and resourceful manner.
Essential Duties and Responsibilities
Perform such typical maintenance operations such as the removal and replacement of aircraft and powerplant components that require bolting, torquing, adjusting rigging and safety wiring, including powerplant and flight control removal and reinstallation.
Repair, modify, replace or overhaul aircraft and aircraft systems to ensure airworthiness .
Complete all tasks to the quality standards of Company, FAA and our customers' approved maintenance manual.
Perform work within estimated or budgeted hours
Read and use Maintenance Manuals, Illustrated parts Catalog, Blueprints, ATA Codes, Service Bulletins, routine and non-routines and other related maintenance documents in order to troubleshoot and effectively complete work assignments.
Ensures that Company and customer aircraft maintenance documents are accurate and properly annotated.
Ensures documents are returned to the Technical Library and/or destroyed, as required, after jobs are complete.
Use and operate safely all ground support equipment, (i.e., Main Lifts, Scissor Lifts, etc.) and possess Company operating certification.
Promote a culture of safety my monitoring self and others to assure all duties are performed within the guidelines as specified by the Company Team Member Safety Manual.
Responsible for the proper execution of parts tags attached to repairable, serviceable or condemned parts.
Interface effectively with members of management, other departments and co-workers
Keep own and adjacent work area clean
Able to work any or all shifts
Requirements
7-9 years years of sheet metal experience on commercial aircraft
Able to read schematics/blueprints of moderate complexity, engineering drawings and technical instructions.
Have working knowledge of SRM (Repair Station Manual) references.
Must have own tools.
High School Diploma/GED.
Must be able to read, write and speak English.
Must be able to lift fifty (50) lbs. Subject to continual loud noises. Must be able to bend, stoop, kneel, and stand for prolonged periods of time, climb steps, ladders and/or service stands.
Successfully complete a comprehensive background check, verification of credentials, and a urinary pre-employment test for drugs as per DOT regulations.
Miscellaneous
About Our Client
Our Client provides aftermarket commercial aircraft, engines, and its parts to passenger and cargo airlines, leasing companies, original equipment manufacturers, and government and defense contractors, as well as maintenance, repair, and overhaul (MRO) service providers worldwide. They were founded in 2008 and are headquartered in Florida.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
203603953904416
As an Unlicensed Mechanic you will be responsible for performing routine and non-routine maintenance on commercial aircraft.
Essential Duties and Responsibilities
Perform preventive maintenance, repairs, part replacement and modifications for aircraft
Perform the assigned maintenance task in accordance with the Federal Aviation Regulations, manufacturer’s recommendations, customers approved maintenance program, approved or acceptable data.
Troubleshoot problems, make repairs, and prepare areas for complete inspections.
Perform high quality and airworthy work in accordance with the Task Card instructions provided to them by the Project Manager and/or their Lead.
Become familiar with and follow the requirements of this Repair Station Manual, Federal Aviation Regulations, Airworthiness Directives, advisory circular, manufacturer’s service bulletins and any other required to perform their assigned work.
Never begin any maintenance unless in possession of the proper, current and applicable approved or acceptable data.
Report any difficulties, uncertainties, unserviceable equipment or potential safety hazards to their supervisor and observe all safety precautions in the performance of assigned tasks at all times.
Report any tool issues to stores and ensure the correct tag is attached and properly completed.
Take part in any required training including GMM and safety.
Proven ability to work alone and in a team environment.
Requirements
4+ years aircraft maintenance experience
Have own tools
Adhere to standard procedures and policies.
Accurately and legibly, record the maintenance or alteration on the proper repair station and/or customer supplied forms including their signature or initials and employee number.
Able to perform intermediate/heavy maintenance tasks with little supervision.
Perform flight control and engine throttle rigging.
Miscellaneous
Tools are required
About Our Client
Our client hosts maintenance facilities in Calgary, Canada, Great Falls, MT and Jacksonville, FL providing complete maintenance, interiors refurbishment and storage capabilities for regional airlines, manufacturers and aircraft leasing companies.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
692102965479930
