Find the right job for your preferred location and specialty
Jobs Available
21 - 30 of 134 Matches
The Aircraft Composite Technician will be responsible for inspection, repairs and fabrication of aircraft composite structures and components on customer aircraft. Performs work on assigned aircraft including assembly, repair, and modification as qualified while adhering to FAA regulations.
Essential Duties and Responsibilities
Know various types of aircraft sealant and appropriate method application for sealant as well as aircraft fasteners and basic methods of installation and suitable substitutions.
Fabricate parts as required and have knowledge of metal and alloys and where substitutes may be used.
Layout and perform complex structural repairs that are addressed in the repair manuals and engineering documents.
Perform such typical maintenance operations such as the removal and replacement of aircraft and powerplant components that require bolting, torqueing, adjusting rigging and safety wiring, including powerplant and flight control removal and reinstallation.
Repair, modify, replace, or overhaul aircraft and aircraft systems to ensure airworthiness.
Requirements
4-6 years of composites experience on aircraft
Experienced with Maintenance Manuals, illustrated parts Catalog, Blueprints, ATA Codes, Service Bulletins, routine and non-routines and other related maintenance documents.
Experience with wet layups
Ability to read, write and communicate in the English language.
Must have own tools
High School Diploma or GED
Ability to operate safely all ground support equipment, (i.e., Main Lifts, Scissor Lifts, etc.) and possess the Company operating certification.
Able to do hot bond repairs with Heatcon hot bonders
Able to do metal prep and metal bonds on wing with hot bonders
Able to co composite material hot bonds with hot bonders
Proficiency with reading and understanding manual references for assigned jobs
Must be able to lift fifty (50) lbs. Subject to continual loud noises. Must be able to bend, stoop, kneel, and stand for prolonged periods of time, climb steps, ladders and/or service stands.
Visual Acuity must be a minimum of 20/40 corrected.
Normal or corrected hearing is required.
Must be able to be at work on time and when needed with reliable transportation
Miscellaneous
About Our Client
Our Client provides aftermarket commercial aircraft, engines, and its parts to passenger and cargo airlines, leasing companies, original equipment manufacturers, and government and defense contractors, as well as maintenance, repair, and overhaul (MRO) service providers worldwide. They were founded in 2008 and are headquartered in Florida.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
103566738876818
APA Services is seeking to hire several Senior Sheetmetal Mechanics for a long term opportunity in Greenville, SC
Essential Duties and Responsibilities
Advanced knowledge of Sheet-Metal fabrication, Sheet-Metal Installation, Sheet-metal Lay-out, Sheet-metal part fabrication
Forming complex angles and configurations, Sheet-metal Forming, drilling, stamping, shaping, bending, punching
Sheet-metal cutting, riveting, filing and dimpling, Install Sheet-metal parts, install fabricated items on aircraft
Read Engineering specifications, Read Blueprints
Requirements
3+ years’ experience
All candidates must have 1 year experience on corporate aircraft.
Applicants should bring all trade specific hand tools to this assignment
Solid work history required (This is a long term assignment. Applicant’s with short stents of employment over the previous 2 years will not be considered)
High School Diploma or GED
Miscellaneous
Tool box MUST be shadowed and tools ETCHED. Candidates must report on day 1 with acceptable US Persons documentation per U.S. Export Control Compliance requirements.
About Our Client
Since 1950, our partner has set the standard for excellence in business aircraft sales, service and management. Its rich history began in Greenville, SC and has expanded to additional locations in Nashville, TN & Dayton, OH.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
552387670724004
Applies moderate to advanced knowledge of material handler processes and skills.
Essential Duties and Responsibilities
Kit production and service orders from warehouse inventory. Perform cycle counts and inventory adjustments, complete material put away and issue, pick up and deliver materials from production storage areas, provide customer service for stakeholders with warehouse or shipping needs, bag and tag parts, load and unload trucks, assemble and pack/unpack containers for shipping/receiving.
Requirements
No formal education required. One (1) to two (2) or more years' work experience in a manufacturing environment. Must be able to use / operate small hand tools and machinery.
Miscellaneous
About Our Client
This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
969017406343513
The Sheet Metal Mechanic is responsible for high proficiency in all minor through major repairs, modifications, E.A.s, and with minimal supervision.
Essential Duties and Responsibilities
Troubleshoots, repairs, replaces, and rebuilds structures components and appliances, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units.
Reads and interprets OEM and DoD Technical Manuals, service
bulletins, Airworthiness Directives, local directives and other specifications to determine maintenance method and procedures.
Performs structural (metallic and composite) inspections for damages
such as cracking, corrosion, delamination, or other damage as specified in the OEM inspection criteria.
Perform structural repairs (metallic and composite) as required utilizing
OEM SRM, Engineering Drawings with DER approval or other approved repair data.
Performs miscellaneous duties to service aircraft, including change and/or inspect fuel, and oil filters, cleaning screens, aircraft
lubrication, wheel and tire maintenance such as tire changes, clean and inspect wheels and bearings and servicing on-board sanitation facilities.
Mix paint and apply for touch-up of aircraft and components.
Complete required repair documentation in accordance with company requirements, Customer GMM if applicable, customer CAMP documents, or customer supplied Flight Docs documents
Requirements
5+ years' sheetmetal experience
Must have experience on 737 and/or Dash 8 aircraft
Must have minimum required tools.
Tool box must be etched shadowed prior to start
High school diploma or equivalent
Miscellaneous
Tools shall be identified with a number unique to the owner. Multiple items too small to identify (apexs, drill bits, etc.) will be placed in a container. The quantity of items, to include the container itself, shall be readable on the outside of the container.
Each item shall be listed on a “Master Tool Box” inventory. A copy shall be on file in QA and one copy in the owner’s tool box.
Facial Hair (Men) – Beards and mustaches, if worn, will be neatly trimmed to an approximate ¼” maximum. Short, evenly trimmed sideburns are allowed.
Hair Overall (All) - Will not be worn in an extreme or fad style. Men’s hair will not extend below the bottom of the standard shirt collar.
Tattoos (All) – Visible tattoos are allowed on arms and legs if they are not discriminatory based on racial, sexual, religious, ethnic, or other characteristics or attributes of a sensitive nature. These include the prohibition of any tattoos commonly associated with gangs, extremists and/or supremacist organizations or discrimination. Tattoos, brandings or body marks on the head, neck, face, tongue, lips, and/or scalp are prohibited. Hand tattoos are limited to one single-band ring tattoo, on one finger, on one hand.
Shoes – When working in safety and/or industrial flight line environment, shoes must follow OSHA guidelines. Can wear tennis shoes (Black is preferred)
Site Specific Uniforms – (All) – Standardized dress at our hangar locations include site specific color uniform pants (responsibility of the employee to provide), blue or white shirts. NO shorts or blue jeans. Can wear Dickies or Cargo pants (BLACK OR NAVY BLUE)
About Our Client
For over 20 years, our client has been providing outstanding aviation services on a global basis to operators of large corporate and V VIP aircraft.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
587384665934260
An Aircraft Inspector will conduct all required inspections in accordance with the applicable Federal Aviation Regulations, manufacturer’s approved data, any customer’s approved program data.
Essential Duties and Responsibilities
Record the results of all inspections performed on the proper inspection forms used by the repair station in accordance with this Inspection Procedures Manual.
Be thoroughly familiar with the applicable Federal Aviation Regulations, specifications, tolerances, limits, inspection methods, techniques, and equipment used in their area of responsibility to determine the quality of the work performed and the airworthiness of the article.
Maintain proficiency with various types of inspection aides used for the inspection of a particular item.
Conduct all required inspections in accordance with the applicable Federal Aviation Regulations, manufacturer’s approved data, any customer’s approved program data, and the policies and procedures contained in this Inspection Procedures Manual.
Ensure current specifications involving inspection tolerances, limits, and procedures recommended by the manufacturer of the product undergoing inspection and other forms of applicable inspection information are available for reference. Other examples of inspection information would be FAA Airworthiness Directives, manufacturer’s bulletins, approved customer data, and Federal Aviation Regulations.
Make final airworthiness determination prior to “Return of Service” on items they are authorized to inspect for any article maintained or altered by this repair station.
Reject any work or parts that have not been properly maintained or altered in accordance with Federal Aviation Regulations, manufacturer’s approved data, customer approved data and the policies and procedures contained within this manual.
Support the company Safety Program
Requirements
Minimum of three (3) years of heavy aircraft maintenance experience OR equivalent combination of education and experience on 737/767/Airbus/Next Gen
GEN FAM – 737, NextGen, A320 - PREFERRED
Active A&P License
Must have own tools
Miscellaneous
Must report with two forms of employment eligibility identification
About Our Client
Headquartered in Everett, Washington, with additional operations in Moses Lake, Washington; Kansas City, Missouri; and Fort Worth, Texas. This national MRO network provides seamless support for military, commercial and regional aircraft operators – including airframe maintenance, component repair, engineering support, fuselage painting, and business jet services.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
984465724624370
The Aircraft Composite Technician will be responsible for inspection, repairs and fabrication of aircraft composite structures and components on customer aircraft. Performs work on assigned aircraft including assembly, repair, and modification as qualified while adhering to FAA regulations.
Essential Duties and Responsibilities
Know various types of aircraft sealant and appropriate method application for sealant as well as aircraft fasteners and basic methods of installation and suitable substitutions.
Fabricate parts as required and have knowledge of metal and alloys and where substitutes may be used.
Layout and perform complex structural repairs that are addressed in the repair manuals and engineering documents.
Perform such typical maintenance operations such as the removal and replacement of aircraft and powerplant components that require bolting, torqueing, adjusting rigging and safety wiring, including powerplant and flight control removal and reinstallation.
Repair, modify, replace, or overhaul aircraft and aircraft systems to ensure airworthiness.
Requirements
10 years + of composites experience on aircraft
Experienced with Maintenance Manuals, illustrated parts Catalog, Blueprints, ATA Codes, Service Bulletins, routine and non-routines and other related maintenance documents.
Experience with wet layups
Ability to read, write and communicate in the English language.
Must have own tools
High School Diploma or GED
Ability to operate safely all ground support equipment, (i.e., Main Lifts, Scissor Lifts, etc.) and possess the Company operating certification.
Able to do hot bond repairs with Heatcon hot bonders
Able to do metal prep and metal bonds on wing with hot bonders
Able to co composite material hot bonds with hot bonders
Proficiency with reading and understanding manual references for assigned jobs
Must be able to lift fifty (50) lbs. Subject to continual loud noises. Must be able to bend, stoop, kneel, and stand for prolonged periods of time, climb steps, ladders and/or service stands.
Visual Acuity must be a minimum of 20/40 corrected.
Normal or corrected hearing is required.
Must be able to be at work on time and when needed with reliable transportation
Miscellaneous
About Our Client
Our Client provides aftermarket commercial aircraft, engines, and its parts to passenger and cargo airlines, leasing companies, original equipment manufacturers, and government and defense contractors, as well as maintenance, repair, and overhaul (MRO) service providers worldwide. They were founded in 2008 and are headquartered in Florida.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
168055298999444
Perform quality aircraft maintenance and/or repairs within budgeted time in compliance with all applicable Code of Federal Regulations, Repair Station Procedures, customer requirements, and manufacturer's recommendations. Organize work plan in an efficient and resourceful manner.
Essential Duties and Responsibilities
Perform such typical maintenance operations such as the removal and replacement of aircraft and powerplant components that require bolting, torquing, adjusting rigging and safety wiring, including powerplant and flight control removal and reinstallation.
Repair, modify, replace or overhaul aircraft and aircraft systems to ensure airworthiness .
Complete all tasks to the quality standards of Company, FAA and our customers' approved maintenance manual.
Perform work within estimated or budgeted hours
Read and use Maintenance Manuals, Illustrated parts Catalog, Blueprints, ATA Codes, Service Bulletins, routine and non-routines and other related maintenance documents in order to troubleshoot and effectively complete work assignments.
Ensures that Company and customer aircraft maintenance documents are accurate and properly annotated.
Ensures documents are returned to the Technical Library and/or destroyed, as required, after jobs are complete.
Use and operate safely all ground support equipment, (i.e., Main Lifts, Scissor Lifts, etc.) and possess Company operating certification.
Promote a culture of safety my monitoring self and others to assure all duties are performed within the guidelines as specified by the Company Team Member Safety Manual.
Responsible for the proper execution of parts tags attached to repairable, serviceable or condemned parts.
Interface effectively with members of management, other departments and co-workers
Keep own and adjacent work area clean
Able to work any or all shifts
Requirements
10+ years years of sheet metal experience on commercial aircraft
Able to read schematics/blueprints of moderate complexity, engineering drawings and technical instructions.
Have working knowledge of SRM (Repair Station Manual) references.
Must have own tools.
High School Diploma/GED.
Must be able to read, write and speak English.
Must be able to lift fifty (50) lbs. Subject to continual loud noises. Must be able to bend, stoop, kneel, and stand for prolonged periods of time, climb steps, ladders and/or service stands.
Successfully complete a comprehensive background check, verification of credentials, and a urinary pre-employment test for drugs as per DOT regulations.
Miscellaneous
About Our Client
Our Client provides aftermarket commercial aircraft, engines, and its parts to passenger and cargo airlines, leasing companies, original equipment manufacturers, and government and defense contractors, as well as maintenance, repair, and overhaul (MRO) service providers worldwide. They were founded in 2008 and are headquartered in Florida.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
174181388339948
Applies advanced technical skills and knowledge in conducting thermal imaging, radiographic, penetrant, ultrasonic, magnetic particle or other nondestructive tests of nonmetallic or metallic aircraft structural parts and components that are used in operational aircraft applications. Ensures the new or repaired product meets company, customer and FAA specifications and standards.
Essential Duties and Responsibilities
Essential Functions: 1. Performs non-destructive tests (NDT) and determines product acceptability to the authorized limits of the NDT level obtained in accordance with prescribed methods and procedures. 2. Records, organizes and evaluates test results and enter results into applicable documents. 3. Ensures compliance to all radiation safety rules and regulations and provides protection to self and others during testing. 4. Maintains equipment and assures calibration for tests to be performed. 5. Maintains inventory control of area equipment.
Additional Functions: 1. Works with and assists other NDT Technicians as required. 2. Coordinates NDT inspection workload according to priorities, efficiency and cost effectiveness. 3. Provides technical assistance to subordinate level NDT technicians. 4. Performs process control on area inspection equipment. 6. Performs exposure room interlock safety checks, establishes radiation safety barriers, zeros pocket dosimeters, operates radiation survey meters and completes applicable survey logs and forms. 7. Performs automated ultrasonic C-scan inspection of composite parts. 7_2. Must be available to work any shift. Perform other duties as assigned.
Requirements
Level of Supervision Required:
The level of supervision required described here is representative of those that must be met by an employee to successfully perform the essential functions of this job. Works under general supervision. Work is reviewed for completion to quality standards and schedule requirements. May adapt techniques and tools to meet special needs with approval from management.
Special Skills, Licenses or Job Requirements:
Demonstrate competency in applying the following in performing normal job duties.
Miscellaneous
About Our Client
This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
106848884182998
The A&P Mechanic troubleshoots, repairs, inspects and performs maintenance on customer aircraft. Performs and documents all work performed per appropriate manuals and regulations as required.
Essential Duties and Responsibilities
Adhere to General Work Requirements
Comply with Environmental / Health / Safety policies and procedures
Participate in 5-S activities
Perform all work in a safe and timely manner
Troubleshoot, repair, install, inspect and perform maintenance on customer aircraft
Perform and document work performed per appropriate manuals and regulations as required
Operate ground support equipment as required
Perform mechanical / electrical removals and installations
May assist with maintenance at off-site locations
Assist in providing time estimates
Assist in performing complex repairs on aircraft systems
Perform other duties as assigned
Requirements
Min of 3 years work exp as an Aircraft Technician OR Min 2 years work exp as an Aircraft Technician PLUS CRJ or Challenger airframe experience.
MRO experience is a plus
Military aircraft maintenance experience (Depot/Isochronal/Phase inspections) is a plus.
FAA Airframe and Powerplant (A&P) required.
Must possess their own tools.
Ability to effectively communicate in English aircraft maintenance actions both verbally and in writing.
Must be comfortable with 12-hour shift work, which includes days / nights and weekends.
Miscellaneous
About Our Client
For over 130 years our client innovative and integrated solutions have demonstrated our commitment to creating a positive social impact around the globe. Our range of products and services are tailored to meet our customers’ evolving needs across the commercial aviation, energy, transportation and infrastructure, machinery, defense and space systems sectors.
Our culture embraces diversity and cooperation, and we promote a healthy balance of professional and personal development, ensuring that your ideas and expertise are valued and respected.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
876060533212150
We are seeking a skilled Structural Fabricator to support aircraft structural and component fabrication in a backshop environment. This role focuses on precision fabrication, modification, and repair of aircraft structures and components, supporting maintenance and production teams through high-quality workmanship, compliance, and collaboration. The ideal candidate brings hands-on fabrication expertise, corporate aviation exposure, and a strong commitment to safety and quality.
Essential Duties and Responsibilities
Adhere to general work requirements applicable to factory, shop, and hangar environments
Comply with all environmental, health, and safety policies and procedures
Participate in 5S initiatives and maintain a safe, organized work area
Troubleshoot, inspect, repair, and maintain aircraft structural components
Fabricate and modify aircraft structural parts and assemblies
Perform structural repairs on composite components, both attached and detached
Remove and install aircraft components as required
Conduct or assist with inspections for hidden damage on aircraft structures
Support and perform complex structural repairs on or off the aircraft
Document all work in accordance with approved manuals and regulatory requirements
Operate ground support equipment as required
Repair or assist in the repair of aircraft and shop components
Perform mechanical and limited electrical component removals and installations
Inspect confined areas of the airframe
Assist with wing removal and reinstallation activities as needed
Support off-site maintenance activities when required
Design, modify, and weld metal fixtures as needed
Fabricate parts for ground support equipment
Assist with aircraft towing operations
Collaborate effectively with other maintenance and fabrication disciplines
Perform other duties as assigned to support operational needs
Requirements
Minimum 4 years of structural fabrication experience (or substantiated equivalent experience)
Minimum 1 year of corporate aircraft experience
Completion of a Sheet Metal Aircraft Technician School or equivalent technical training
Ability to read, interpret, and work from mechanical and engineering drawings
Strong written and verbal communication skills related to task execution and aircraft status
Ownership of a basic set of hand tools, with the ability to demonstrate proper inventory control
Ability to obtain required Ground Support Equipment (GSE) qualifications
Willingness to work unscheduled overtime, including weekends and holidays
Ability to work outdoors in seasonal and inclement weather when required
Ability to obtain a SIDA badge, if applicable
Basic proficiency with computers and standard PC applications
Miscellaneous
About Our Client
Our client is a global leader in aviation, committed to creating cutting-edge aircraft that set the standard for performance, reliability, and innovation. With headquarters in Montreal, Canada, they operate globally, including in the U.S., where they maintain a significant presence. At the Hartford Service Center, the mission is to deliver top-tier maintenance and support for their fleet, ensuring each aircraft operates at peak performance. With a commitment to excellence and a focus on innovation, our client provides unmatched career opportunities for those passionate about aviation.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
137740750174654
