Jobs Available

121 - 130 of 200 Matches
Featured job

Sheetmetal Mechanic II (5-10 years)

Southeast (PENSACOLA, FL)
Posted on 1/23/2025

A Sheetmetal Mechanic II is responsible for high proficiency in all minor through major repairs, modifications, E.A.s, and with minimal supervision.

Essential Duties and Responsibilities

Remove and replace various aircraft components with the use of special tooling and ground support equipment following oral and written instructions such as supervisor’s directives and manuals to complete all routine and non-routine assignments in a timely manner. Ability to layout work using bend radius, set back and bend allowance charts, utilization of shop math, install and/or splice spars, landing gear, trunion changes, pressure bulkhead repairs and keal beam repairs/ removal and reinstall. Perform the duties of and provide the necessary training for lower skill levels. Maintain and store tools in a serviceable condition. Adhere to safe maintenance practices and keep a clean work area. Maintain and supply personal records of work performed on OJT forms for the Training Department. Successfully complete any courses deemed necessary by the Training Department. Perform any work that may be assigned by his or her supervisor.

Requirements

5 - 10 years’ experience of heavy structures on commercial aircraft. Passenger to Cargo conversions is a plus Minimum Required Tools (Etched before Arrival). Operating knowledge of shop equipment to include, drill presses, shears, brakes, and band saws. Capable of performing structural repairs on floor beams, fuselage skin repairs, to include stringers, doublers, and triplers. Capable of performing floor beam, and frame installations / repairs. Capable of performing basic repairs, blend outs, and reinforcing repairs. Corrosion removal, damage evaluation, and finish restoration. Ability to read and interpret SRM damage limits, and repairs. Working knowledge of IPCs. Ability to read, interpret, plan and work from complex SRM’s, Blueprints, Service Bulletins, ADs, EAs, and EO’s. Working knowledge of cold working, roto peening, and freeze plug installations a plus.

Miscellaneous

Candidates must report on first day with 2 forms of acceptable identification to verify employment eligibility. Applicants should plan on one week of orientation/training upon arrival APA offers on site representation Food trucks available daily onsite.

About Our Client

Our Client is located at Brookley Aeroplex in Mobile, Alabama, and Pensacola, FL, at the Pensacola International Airport. They are a renowned provider of aircraft maintenance and modification (AMM) services for commercial airlines and air freight operators. They meet their customers' requirements by providing a full spectrum of high-quality, reliable, and timely AMM and engineering solutions. Our client has the know-how and experience to comprehensively manage complex projects, ensuring the customers' aircraft operate safely and efficiently.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

197217582179912

Featured job

Cabinet Finisher II

Southeast (Savannah, GA)
Posted on 1/23/2025

Under general supervision, prepares and applies finishes to aircraft furniture using aircraft specifications, designs and engineering drawings with a high level of safety, quality, detail and productivity. Assists team members with greater experience to enhance techniques supportive of quality workmanship.

Essential Duties and Responsibilities

Essential Functions: Works under general supervision to prepare furniture for finish and disassembly using blueprints, aircraft specifications and design/engineering drawings. Performs high quality repairs to various finished surfaces in the shop and aboard aircraft. Cleans and polishes blemishes as needed to prepare the aircraft for delivery. Applies finish to furniture using spray equipment and other manual/mechanical methods. Uses various types of sandpapers, polishes, adhesives, masking mediums, solvents, finish materials, hand tools and various power tools to disassemble and finish furniture. Complies with all safety, 5S, and housekeeping policies. Uses personal protective equipment to protect aircraft interior (PTP). Uses the material tracking system to create parts demand, track squawks and to sign-off work. Additional Functions: Works with lead and higher skilled technicians to develop and implement process improvements that increase safety, reduce, cost, cycle time, and man-hours using Lean Six-Sigma and other process improvement techniques. . Perform other duties as assigned.

Requirements

High School Diploma or GED required. Two (2) years experience in wood finishing. Experience in aerospace industry preferred. Basic knowledge of cabinet finishing processes and products. Other Requirements: Possess a working knowledge of Gulfstream inspection and process specifications. The ability to read, write, speak, and understand the English language. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. Must be computer literate.

Miscellaneous

Unique Skills: Craft the finest interiors in aviation Gulfstream Furniture Center is looking for experienced cabinet finisher who is talented, motivated and ready to craft unique designs in award-winning cabins. **Two (2) years’ experience in wood finishing / cabinetmaking required, aerospace industry experience required. This is CONTRACTOR position for the Weekend Shift; Fri, Sat, Sun 0500-1730 & Monday 0500-0900, you may be asked to be trained initially on 1st shift (Mon-Thurs 0500-1530) then transitioned to weekends with notification.

About Our Client

Our client has led the evolution of business and personal aviation since the 1958 debut of the world’s first purpose-built business aircraft. Today, they produce the world’s most advanced business aircraft, with innovations from nose to tail and wingtip to wingtip, all while offering unmatched global product support and service.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

743790038755184

Featured job

Master Flight Controls Technician (A&P)

West (Everett, WA)
Posted on 1/23/2025

Our client is seeking to hire turn-key licensed master mechanics for a brand new project at their location in Everett, WA

Essential Duties and Responsibilities

Remove and Install flight control surfaces and components Repair, replace, and rebuild aircraft structures Utilize OEM and Engineering drawings to modify structures and flight controls Perform weight and balance including calculation of flight control surfaces Perform rigging and operational test of all flight control surfaces including autopilot Troubleshoot flight control systems Commercial aviation or equivalent military aviation maintenance experience Works under minimal supervision

Requirements

A&P License Removal, Installation, functional testing of Flight Control systems of plane structures (i.e., elevators, ailerons, slats, flaps, etc.). Rigging, removal, installation, and functional testing of flight controls Mentor/ guide small crew of lower-level non-licensed mechanics and sign on their repairs

Miscellaneous

About Our Client

Headquartered in Everett, Washington, with additional operations in Moses Lake, Washington; Kansas City, Missouri; and Fort Worth, Texas. This national MRO network provides seamless support for military, commercial and regional aircraft operators – including airframe maintenance, component repair, engineering support, fuselage painting, and business jet services.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

175141843373795

Featured job

Master Heavy Structures Mechanic (A&P)

West (Everett, WA)
Posted on 1/23/2025

Our client is seeking to hire turn-key licensed master mechanics for a brand new project at their location in Everett, WA

Essential Duties and Responsibilities

Locate and mark dimensions, layout patterns, and templates, fabricate parts, repair or replace heavy structure aircraft components. Read and interpret manufacturer and airline maintenance manuals, service bulletins, engineering authorizations, structural repair manuals, drawings and other specifications to determine feasibility and method of repair, replacement or modification Provide accurate documentation on customer paperwork per FAA requirements. Communicate effectively with other maintenance personnel at all levels by keeping co-workers and leadership apprised of work progress and difficulties as they arise. Follow safety program including hazmat tool control and foreign object damage (FOD) Conduct operational tests. Help with general clean-up of work area. Maintain regular and prompt attendance Perform other duties as assigned.

Requirements

A&P License Must be able to execute the most complex Structure Repairs by reviewing SRMs and engineering drawings. • Floor beams, seat tracks, 540 stringer repairs, 663 pressure deck, Cargo Bay repairs. • Skin repairs & skin replacements. • Able to identify flag notes in engineering drawings – interpret Advanced Drawing Change Notices (ADCN). • Mentor/ guide small crew of lower-level non-licensed mechanics and sign on their repairs

Miscellaneous

About Our Client

Headquartered in Everett, Washington, with additional operations in Moses Lake, Washington; Kansas City, Missouri; and Fort Worth, Texas. This national MRO network provides seamless support for military, commercial and regional aircraft operators – including airframe maintenance, component repair, engineering support, fuselage painting, and business jet services.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

118026573513137

Featured job

Sheetmetal Mechanic I (1-5 YEARS)

Southeast (PENSACOLA, FL)
Posted on 1/23/2025

A Sheetmetal Mechanic I is responsible for high proficiency in all minor through major repairs, modifications, E.A.s, and with minimal supervision.

Essential Duties and Responsibilities

Remove and replace various aircraft components with the use of special tooling and ground support equipment following oral and written instructions such as supervisor’s directives and manuals to complete all routine and non-routine assignments in a timely manner. Ability to layout work using bend radius, set back and bend allowance charts, utilization of shop math, install and/or splice spars, landing gear, trunion changes, pressure bulkhead repairs and keal beam repairs/ removal and reinstall. Perform the duties of and provide the necessary training for lower skill levels. Maintain and store tools in a serviceable condition. Adhere to safe maintenance practices and keep a clean work area. Maintain and supply personal records of work performed on OJT forms for the Training Department. Successfully complete any courses deemed necessary by the Training Department. Perform any work that may be assigned by his or her supervisor.

Requirements

1-5 years’ experience of heavy structures on commercial aircraft. Passenger to Cargo conversions is a plus Minimum Required Tools (Etched before Arrival). Operating knowledge of shop equipment to include, drill presses, shears, brakes, and band saws. Capable of performing structural repairs on floor beams, fuselage skin repairs, to include stringers, doublers, and triplers. Capable of performing floor beam, and frame installations / repairs. Capable of performing basic repairs, blend outs, and reinforcing repairs. Corrosion removal, damage evaluation, and finish restoration. Ability to read and interpret SRM damage limits, and repairs. Working knowledge of IPCs. Ability to read, interpret, plan and work from complex SRM’s, Blueprints, Service Bulletins, ADs, EAs, and EO’s. Working knowledge of cold working, roto peening, and freeze plug installations a plus.

Miscellaneous

Candidates must report on first day with 2 forms of acceptable identification to verify employment eligibility. Applicants should plan on one week of orientation/training upon arrival APA offers on site representation Food trucks available daily onsite.

About Our Client

Our Client is located at Brookley Aeroplex in Mobile, Alabama, and Pensacola, FL, at the Pensacola International Airport. They are a renowned provider of aircraft maintenance and modification (AMM) services for commercial airlines and air freight operators. They meet their customers' requirements by providing a full spectrum of high-quality, reliable, and timely AMM and engineering solutions. Our client has the know-how and experience to comprehensively manage complex projects, ensuring the customers' aircraft operate safely and efficiently.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

287211682845515

Featured job

Aircraft Painter II

Southeast (Savannah, GA)
Posted on 1/23/2025

The Aircraft Painter II works under minimum supervision to safely prepare, paint and detail aircraft according to schedule using company quality standards and operating procedures.

Essential Duties and Responsibilities

Safely perform aircraft preparation, painting, and detailing of aircraft under minimal supervision. Coordinate with supervision and Inspection to ensure compliance with internal and FAA paperwork, sign-offs and quality specifications. Follow standard operating procedures when using tools and equipment such as dual action sanders, hydraulic lift platforms and paint sprayers. Properly care for and maintain shop equipment and tools. Follow standard operating procedures when using sealants, paint strippers and corrosion-preventive chemicals and use protective equipment as required. Comply with safety rules and procedures and be alert for unsafe conditions. Address unsafe conditions before putting people or property at risk. Use the material tracking system to create parts demand, track squawks and to sign-off work. Assist with aircraft movement in hangars. Offer continuous improvement ideas/participate in continuous improvement activities. Additional Functions: 1. Perform other duties as required. Other Requirements:

Requirements

Ability to read, write, speak, and understand the English language. Able to use tools and equipment associated with the aircraft painting process. Ability to read and interpret blueprints and engineering documentation. Able to pass Pulmonary Function Test to obtain respirator certification. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. Must be computer literate.

Miscellaneous

About Our Client

Our client has led the evolution of business and personal aviation since the 1958 debut of the world’s first purpose-built business aircraft. Today, they produce the world’s most advanced business aircraft, with innovations from nose to tail and wingtip to wingtip, all while offering unmatched global product support and service.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

182754160267420

Featured job

Sheetmetal Mechanic III 10+ years

Southeast (PENSACOLA, FL)
Posted on 1/23/2025

A Sheetmetal Mechanic III is responsible for high proficiency in all minor through major repairs, modifications, E.A.s, and with minimal supervision.

Essential Duties and Responsibilities

Remove and replace various aircraft components with the use of special tooling and ground support equipment following oral and written instructions such as supervisor’s directives and manuals to complete all routine and non-routine assignments in a timely manner. Ability to layout work using bend radius, set back and bend allowance charts, utilization of shop math, install and/or splice spars, landing gear, trunion changes, pressure bulkhead repairs and keal beam repairs/ removal and reinstall. Perform the duties of and provide the necessary training for lower skill levels. Maintain and store tools in a serviceable condition. Adhere to safe maintenance practices and keep a clean work area. Maintain and supply personal records of work performed on OJT forms for the Training Department. Successfully complete any courses deemed necessary by the Training Department. Perform any work that may be assigned by his or her supervisor.

Requirements

11 - 20 years’ experience of heavy structures on commercial aircraft. Passenger to Cargo conversions is a plus Minimum Required Tools (Etched before Arrival). Operating knowledge of shop equipment to include, drill presses, shears, brakes, and band saws. Capable of performing structural repairs on floor beams, fuselage skin repairs, to include stringers, doublers, and triplers. Capable of performing floor beam, and frame installations / repairs. Capable of performing basic repairs, blend outs, and reinforcing repairs. Corrosion removal, damage evaluation, and finish restoration. Ability to read and interpret SRM damage limits, and repairs. Working knowledge of IPCs. Ability to read, interpret, plan and work from complex SRM’s, Blueprints, Service Bulletins, ADs, EAs, and EO’s. Working knowledge of cold working, roto peening, and freeze plug installations a plus.

Miscellaneous

Candidates must report on first day with 2 forms of acceptable identification to verify employment eligibility. Applicants should plan on one week of orientation/training upon arrival APA offers on site representation Food trucks available daily onsite.

About Our Client

Our Client is located at Brookley Aeroplex in Mobile, Alabama, and Pensacola, FL, at the Pensacola International Airport. They are a renowned provider of aircraft maintenance and modification (AMM) services for commercial airlines and air freight operators. They meet their customers' requirements by providing a full spectrum of high-quality, reliable, and timely AMM and engineering solutions. Our client has the know-how and experience to comprehensively manage complex projects, ensuring the customers' aircraft operate safely and efficiently.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

637653779363898

Featured job

Aircraft Painter I

Southeast (Savannah, GA)
Posted on 1/23/2025

The Aircraft Painter I prepares the aircraft for paint related operations by performing tasks safely within schedule while meeting quality expectations.

Essential Duties and Responsibilities

Principal Duties and Responsibilities Mask, sand, and prepare aircraft for paint application. Apply glazing and sealing compounds in preparation for final painting. Operate and maintain all types of preparation and priming equipment. Mix paints and primers. Perform leading edge sealant work in final detail. Comply with all safety, 5S, and housekeeping policies. Use personal protective equipment and ensure aircraft interior is protected (PTP). Properly care for and maintain shop equipment and tools as assigned. Comply with Paint shop standard practices. Perform other duties as required.

Requirements

One (1) year of painting experience. A working knowledge of paint processes and products (lacquers, enamels, epoxies, urethanes, and acrylics). High school diploma/GED. Ability to read, write, speak, and understand the English language. Ability to read and interpret blueprints and engineering documentation. Able to pass Pulmonary Function Test to obtain respirator certification. Ability to use tools, equipment, and materials in the aircraft painting process. Able to climb ladders and stairs, perform close tolerance work, work in small spaces lift up to 40 pounds and work any shift. Must be computer literate.

Miscellaneous

About Our Client

Our client has led the evolution of business and personal aviation since the 1958 debut of the world’s first purpose-built business aircraft. Today, they produce the world’s most advanced business aircraft, with innovations from nose to tail and wingtip to wingtip, all while offering unmatched global product support and service.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

905055512299601

Featured job

Aircraft Mechanic II (Unlicensed)

Southeast (Jacksonville, FL)
Posted on 1/23/2025

An Aircraft Mechanic II performs skilled work to identify, remove, and install aircraft components and to perform servicing of engines and aircraft accessories.

Essential Duties and Responsibilities

Troubleshoots, repairs and services aircraft and engine systems. Conducts diagnosis of malfunctions. Performs maintenance, disassembly, rework, repair, replacement, re-assembly or adjustment of various aircraft systems in accordance with technical specifications, engineering instructions, and FAA regulations. Maintains FAA required records, manuals and inspection forms. Reads and complies with instructions and safety information as necessary for proper and safe completion of assigned work.

Requirements

Minimum 3 years of aircraft maintenance experience on Airbus and Boeing Aircraft High School Diploma or GED Have own tools Must be able to read, write, and speak effectively in English regarding safety sensitive work activities, per FAA requirements. Individual will perform daily transactions within the ERP system (AMROS KIOSK), vending (POU), as well as research customer’s maintenance manuals. Work safely and follow safety rules and regulations. Take action to prevent others from engaging in unsafe practices.

Miscellaneous

Must report with two forms of employment eligibility identification

About Our Client

Our client is an independent provider of aviation services to commercial and government customers in more than 100 countries. Our client's aftermarket expertise and award-winning solutions help customers increase efficiency and reduce costs while maintaining high levels of quality, service and safety.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

169961938584907

Featured job

QC Inspect I

South Central (TULSA, OK)
Posted on 1/23/2025

In a team oriented environment, perform all tasks in Initial Phase Manufacturing, Composites, Final Phase in a timely and efficient manner to ensure aircraft parts, sub-assemblies, major assemblies, and installations are built to type design data.

Essential Duties and Responsibilities

Essential Functions: 1. Perform inspection duties utilizing engineering drawings and orders, route cards, inspection travelers, work instructions, technical specifications, QA procedures and instructions, and other related documents. 2. Perform preliminary and progressive inspections of aircraft structure and systems, verify functional operation, final inspections, inspect for FOD and verify paperwork. Witness, verify and document specified manufacturing process steps. 3. Perform conformity/first article inspections to ensure compliance with FAA approved procedures. 4. Ensure the proper use and storage of area tools and equipment. 5. Conduct work in a manner that enhances own/other employees health and safety, product safety and promotes risk reduction; participate openly in safety-related event investigations, and immediately report workplace hazards and make suggestions for control; cooperate and contribute toward the overall success of the Safety program at the local level. Additional Functions: 1. Provide technical support to manufacturing personnel. 2. Perform area inspections to ensure compliance with applicable standards and specifications. 3. Participate in continuous improvement activities. Perform other duties as assigned.

Requirements

High School Diploma or GED required. 1 year quality inspection experience or 2 years GAC manufacturing experience required. 2 years manufacturing experience or equivalent aerospace experience preferred. Other Formal Inspection Training Program 90 Days required. Other Requirements: 1. Working knowledge of shop mathematics, and CATIA or blueprint reading and interpretation. 2. Competent in the use of basic shop tools and equipment..

Miscellaneous

Previous composite manufacturing/inspection experience preferred.1 year of quality inspection experience or 2 years of GAC manufacturing experience required.

About Our Client

Our client has led the evolution of business and personal aviation since the 1958 debut of the world’s first purpose-built business aircraft Today, they produce the world’s most advanced business aircraft, with innovations from nose to tail and wingtip to wingtip, all while offering unmatched global product support and service.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

179596455504470

Benefits of working with APA Services

Weekly Payroll, Medical Insurance Available, Cash Advances, Travel Pay and/or bonuses on Select Contracts.
We know it takes great people to do great work, so if you're interested in joining the APA Services family, give us a call at:

(817)529-4000

Thanks for taking the time to visit APA Services and we look forward to working with you soon.

Browse All Jobs