Find the right job for your preferred location and specialty
Jobs Available
1 - 10 of 170 Matches
The Sheet Metal Mechanic is responsible for high proficiency in all minor through major repairs, modifications, E.A.s, and with minimal supervision.
Essential Duties and Responsibilities
Remove and replace various aircraft components with the use of special tooling and ground support equipment following oral and written instructions such as supervisor’s directives and manuals to complete all routine and non-routine assignments in a timely manner.
Proficient detail blueprint reading, ability to read, interpret and work from service bulletins, engineering work orders, major S.R.M. structural repairs.
Ability to layout work using bend radius, set back and bend allowance charts, utilization of shop math, install and/or splice spars, landing gear, trunion changes, pressure bulkhead repairs and keal beam repairs/ removal and reinstall.
Knowledge of ATA codes, knowledge of all applicable F.A.R.’s and company policies and procedures including job card/ time card, routine/ non-routine cards, S.R.M.’s, service bulletins, E.O.’s, and work sign-off/ sell-off procedures.
Perform the duties of and provide the necessary training for lower skill levels.
Maintain and store tools in a serviceable condition.
Adhere to safe maintenance practices and keep a clean work area.
Maintain and supply personal records of work performed on OJT forms for the Training Department.
Successfully complete any courses deemed necessary by the Training Department.
Perform any work that may be assigned by his or her supervisor.
Requirements
8+ years of aviation structures mechanic experience
Tools are required
Miscellaneous
About Our Client
Our client hosts maintenance facilities in Calgary, Canada, Great Falls, MT and Jacksonville, FL providing complete maintenance, interiors refurbishment and storage capabilities for regional airlines, manufacturers and aircraft leasing companies.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
175073016575661
A&P Mechanic will service troubleshoot, repair, modify, preserve, maintain, and overhaul aircraft, aircraft systems, and aircraft components in accordance with policies, procedures, requirements, and specifications established by the company, applicable government agencies, and aircraft manufactures as contained in approved Maintenance Manuals.
Essential Duties and Responsibilities
Must have working knowledge and the ability to service troubleshoot, repair, modify, preserve, maintain, and overhaul aircraft, aircraft system, and aircraft components.
Performs all work assigned in accordance with approved maintenance procedures.
Records work performed and assumes responsibility for that work as indicated by his/her signature.
Uses blueprints, schematics, technical drawings, and Maintenance Manuals in performance of assigned duties.
Performs touch up painting as needed, (within task area).
May do experimental and developmental work as assigned.
Requirements
5+ years of A&P experience
Must have experience on at least one of the following: Dornier turbo prop
Have own tools - tools must be shadowed
High School Diploma or equivalent
Miscellaneous
About Our Client
In 1995 our client launched as an aircraft instrument, radio and avionics repair shop to complement their parts distribution company previously founded. In time, the company has become a FAA/EASA Part 145 repair station and grown to serve a variety of general aviation, business, commercial, and government aircraft, including fixed and rotary-winged operators around the world. Today they specialize in three major MRO markets: avionics, aircraft maintenance and component repair and continues to strategically expand.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
325607855334483
We are seeking an experienced AOG (Aircraft on Ground) Aircraft Technician to support rapid-response maintenance and troubleshooting on corporate aircraft in Nashville, TN. This role is responsible for safely returning aircraft to service through efficient diagnostics, compliant repairs, and accurate documentation—often under tight timelines and changing conditions.
Ideal candidates have hands-on experience supporting King Air, Citation, Gulfstream, and/or Global aircraft, with a minimum of 3 years of experience across any combination of these platforms.
Essential Duties and Responsibilities
Respond to AOG service calls and perform maintenance to return aircraft to service quickly and safely.
Troubleshoot aircraft systems and determine corrective actions in a time-sensitive environment.
Perform inspections, repairs, removals/installs, and component changes using approved data.
Use and interpret maintenance manuals and approved references (AMM, SRM, IPC, WDM, drawings, engineering dispositions, etc.).
Complete functional checks, operational checks, and return-to-service actions.
Ensure all work complies with FAA regulations and quality standards.
Accurately complete all maintenance documentation, including logbook entries and work order records.
Coordinate with leads, maintenance control, and QA as needed for approvals and release requirements.
Maintain a clean, safe work environment and comply with safety/FOD policies.
Communicate professionally and represent the company well while supporting AOG events.
Requirements
Must have a valid A&P License
Minimum 3 years of hands-on aircraft maintenance experience on any combination of: King Air, Citation, Gulfstream, Global
Strong troubleshooting ability and ability to work independently with minimal supervision.
Prior AOG/on-call experience in corporate/business aviation
Strong customer-facing communication skills
Experience working in fast-paced, high-urgency environments
Ability to read and follow maintenance manuals, wiring diagrams, and engineering instructions.
Must be able to work a flexible schedule, including nights/weekends/holidays as required by AOG demand.
Must be able to pass pre-employment screening requirements (drug screen/background, etc.).
Valid driver’s license and ability to meet badging/site access requirements.
Miscellaneous
Must have a clean driving record.
About Our Client
Since 1950, our partner has set the standard for excellence in business aircraft sales, service and management. Its rich history began in Greenville, SC and has expanded to additional locations in Nashville, TN & Dayton, OH.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
114032111724987
We are seeking a skilled Structural Fabricator to support aircraft structural and component fabrication in a backshop environment. This role focuses on precision fabrication, modification, and repair of aircraft structures and components, supporting maintenance and production teams through high-quality workmanship, compliance, and collaboration. The ideal candidate brings hands-on fabrication expertise, corporate aviation exposure, and a strong commitment to safety and quality.
Essential Duties and Responsibilities
Adhere to general work requirements applicable to factory, shop, and hangar environments
Comply with all environmental, health, and safety policies and procedures
Participate in 5S initiatives and maintain a safe, organized work area
Troubleshoot, inspect, repair, and maintain aircraft structural components
Fabricate and modify aircraft structural parts and assemblies
Perform structural repairs on composite components, both attached and detached
Remove and install aircraft components as required
Conduct or assist with inspections for hidden damage on aircraft structures
Support and perform complex structural repairs on or off the aircraft
Document all work in accordance with approved manuals and regulatory requirements
Operate ground support equipment as required
Repair or assist in the repair of aircraft and shop components
Perform mechanical and limited electrical component removals and installations
Inspect confined areas of the airframe
Assist with wing removal and reinstallation activities as needed
Support off-site maintenance activities when required
Design, modify, and weld metal fixtures as needed
Fabricate parts for ground support equipment
Assist with aircraft towing operations
Collaborate effectively with other maintenance and fabrication disciplines
Perform other duties as assigned to support operational needs
Requirements
Minimum 5-8 years of structural fabrication experience (or substantiated equivalent experience)
Minimum 1 year of corporate aircraft experience
Completion of a Sheet Metal Aircraft Technician School or equivalent technical training
Ability to read, interpret, and work from mechanical and engineering drawings
Strong written and verbal communication skills related to task execution and aircraft status
Ownership of a basic set of hand tools, with the ability to demonstrate proper inventory control
Ability to obtain required Ground Support Equipment (GSE) qualifications
Willingness to work unscheduled overtime, including weekends and holidays
Ability to work outdoors in seasonal and inclement weather when required
Ability to obtain a SIDA badge, if applicable
Basic proficiency with computers and standard PC applications
Miscellaneous
About Our Client
Our client is a global leader in aviation, committed to creating cutting-edge aircraft that set the standard for performance, reliability, and innovation. With headquarters in Montreal, Canada, they operate globally, including in the U.S., where they maintain a significant presence. At the Hartford Service Center, the mission is to deliver top-tier maintenance and support for their fleet, ensuring each aircraft operates at peak performance. With a commitment to excellence and a focus on innovation, our client provides unmatched career opportunities for those passionate about aviation.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
781099555627727
The Sheet Metal Mechanic Assistant is responsible for assembling and/or repairing of aircraft parts, components, subsystems and operating systems.
Essential Duties and Responsibilities
Reads work instructions including production planning, engineering drawings, full size Mylar layouts, process specifications and other technical documentation to insure proper detail configuration.
Determines dimensions to layout holes patterns, install clips, brackets, nut plates and like items.
Lays out and marks dimensions and reference lines on material with or without templates or shop aides to develop or back drill hole patterns on composite, sheet metal and mechanical parts.
Trims sheet metal and composite parts to fit and files, grinds, deburrs, buffs, and smooths surfaces.
Installs assemblies in assembly jigs, fixtures or other tooling according to work instructions.
Assembles parts into subassemblies and final assemblies using basic hand tools such as, drill motors, die grinders, sanders, polishers, rivet shavers and other like tools.
Drills holes of varying sizes in detail parts and subassemblies according to work instructions.
Installs blind rivets, Jo-Bolts, hilocks, huck bolts, solid rivets and bolts, drives and bucks rivets to attach and assemble detail parts to structural parts and complete subassemblies to written and verbal work instructions.
Inspects completed assemblies for conformance to specifications.
Completes and maintains necessary paperwork for documenting processes performed.
Requirements
High School Diploma or GED
Two (2) or more years of major aircraft structural assembly.
Miscellaneous:
Must provide own tools
Miscellaneous
About Our Client
This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
785429413880702
The Avionics Technician troubleshoot repairs, inspect, modify and service aircraft avionics, electrical and electronic equipment. Perform and document all work performed per appropriate manuals and regulations as required.
Essential Duties and Responsibilities
Adhere to General Work Requirements (Factory, Shop and / or Hangar positions)
Comply with environmental health / safety policies and procedures. Participate in 5-S activities. Perform all assigned tasks in a safe and timely manner
Operate ground support equipment as required
Assist with mechanical / electrical removals and installations
May assist with maintenance at off-site locations
Perform other duties as assigned
Requirements
Min 4+ years of experience as an Avionics Technician
Corporate Jet or commercial aircraft experience preferred
If former military, Depot/Isochronal/Phase inspections are a plus
CRJ airframe experience is a plus
FAA A&P or A license is required.
GROL or AET certification is preferred
Certification from Avionics, Electric A/C Technical school or equivalent military training is preferred
Must have own tools
Must be able to effectively communication in English both verbally and in writing
Must be comfortable with 12hr shift work including days/nights and weekends.
Miscellaneous
About Our Client
For over 130 years our clients innovative and integrated solutions have demonstrated our commitment to creating a positive social impact around the globe. Our range of products and services are tailored to meet our customers’ evolving needs across the commercial aviation, energy, transportation and infrastructure, machinery, defense and space systems sectors.
Our culture embraces diversity and cooperation, and we promote a healthy balance of professional and personal development, ensuring that your ideas and expertise are valued and respected.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
123635740452038
We are seeking a skilled Structural Fabricator to support aircraft structural and component fabrication in a backshop environment. This role focuses on precision fabrication, modification, and repair of aircraft structures and components, supporting maintenance and production teams through high-quality workmanship, compliance, and collaboration. The ideal candidate brings hands-on fabrication expertise, corporate aviation exposure, and a strong commitment to safety and quality.
Essential Duties and Responsibilities
Adhere to general work requirements applicable to factory, shop, and hangar environments
Comply with all environmental, health, and safety policies and procedures
Participate in 5S initiatives and maintain a safe, organized work area
Troubleshoot, inspect, repair, and maintain aircraft structural components
Fabricate and modify aircraft structural parts and assemblies
Perform structural repairs on composite components, both attached and detached
Remove and install aircraft components as required
Conduct or assist with inspections for hidden damage on aircraft structures
Support and perform complex structural repairs on or off the aircraft
Document all work in accordance with approved manuals and regulatory requirements
Operate ground support equipment as required
Repair or assist in the repair of aircraft and shop components
Perform mechanical and limited electrical component removals and installations
Inspect confined areas of the airframe
Assist with wing removal and reinstallation activities as needed
Support off-site maintenance activities when required
Design, modify, and weld metal fixtures as needed
Fabricate parts for ground support equipment
Assist with aircraft towing operations
Collaborate effectively with other maintenance and fabrication disciplines
Perform other duties as assigned to support operational needs
Requirements
Minimum 8 years of structural fabrication experience (or substantiated equivalent experience)
Minimum 1 year of corporate aircraft experience
Completion of a Sheet Metal Aircraft Technician School or equivalent technical training
Ability to read, interpret, and work from mechanical and engineering drawings
Strong written and verbal communication skills related to task execution and aircraft status
Ownership of a basic set of hand tools, with the ability to demonstrate proper inventory control
Ability to obtain required Ground Support Equipment (GSE) qualifications
Willingness to work unscheduled overtime, including weekends and holidays
Ability to work outdoors in seasonal and inclement weather when required
Ability to obtain a SIDA badge, if applicable
Basic proficiency with computers and standard PC applications
Miscellaneous
About Our Client
Our client is a global leader in aviation, committed to creating cutting-edge aircraft that set the standard for performance, reliability, and innovation. With headquarters in Montreal, Canada, they operate globally, including in the U.S., where they maintain a significant presence. At the Hartford Service Center, the mission is to deliver top-tier maintenance and support for their fleet, ensuring each aircraft operates at peak performance. With a commitment to excellence and a focus on innovation, our client provides unmatched career opportunities for those passionate about aviation.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
107872606354593
4 years' experience in aircraft repair bonding in an aerospace environment
2nd Shift / Will have to train on 1st shift for at least 30 days
Competitive pay DOE
Applies advanced technical skills and knowledge to fabricate, rework and repair metallic and nonmetallic bonded parts and assemblies for operational aircraft applications. Performs any of the detailed work operations required to be completed in this area of specialization.
Essential Duties and Responsibilities
Essential Functions and Key Responsibilities: Performs bonding of metallic and nonmetallic materials to fabricate parts, components and assemblies for aircraft applications using products and processes that are varied and moderately complex to complex in scope. The level of work requires experience and sound judgment. Read and interpret blueprints, drawings, manuals, specifications sketches, job orders, planning documents and engineering drawings. Determine equipment requirements and the method and sequences of operation to be followed in fabrication of parts using materials such as graphite, fiberglass, plastic, boron, flock, mat, epoxy resins, rubber and like materials. Plans, lays out, fabricates and builds adhesive bonded assemblies of metallic and nonmetallic composite materials. Fabricate composite and metal parts into subassemblies for the purpose of prefitting in preparation for bonding/curing in presses, ovens, and autoclaves. Lays out, prefits, assembles and performs lay-up on a variety of metal to metal and composite bonded assemblies. Fits core in panels where close tolerances are required for installation of details for completion of assembly. Performs vacuum bagging for Autoclave cures up to 100 psi. Lays out and marks dimensions and reference lines on material to develop and trace patterns of product or parts, or uses templates. Selects tooling and materials compatible with the processing techniques identified in the work instructions. Performs rework or repair on any metallic or nonmetallic part presented for rework or repair.
Requirements
4 years experience in Aircraft Repair Bonding in an aerospace environment
Special Skills, Licenses or Job Requirements: Demonstrate competency in applying the following in performing normal job duties. • Reading and interpreting work instructions, properly documenting work performed on such documents as process planning, adhesive log sheets, Material Review Board documents, Engineering Work Orders, Change Notices, Engineering Process Specifications, technical manuals and like documentation. • Use close tolerance measuring tools i.e. scales, micrometers, calipers, depth gages and like tools.
Special Training and Behavioral Competencies: • Safety training as required by OSHA. • Intermediate blueprint reading.
Miscellaneous
About Our Client
This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
175428247312760
Applies basic, and some intermediate technical skills and knowledge to perform various production operations to fabricate, assemble and repair metallic and nonmetallic parts and assemblies for aerospace industry applications.
Essential Duties and Responsibilities
Performs routine developmental learning assignments and applies standard solutions to work situations of a routine or repetitive nature. May perform a variety of routine duties related to the area to which assigned.
Uses hand and power tools such as routers, drill motors, die grinders and other like tools to complete the required operations called out in the work instructions.
Trims parts to fit and files, grinds, deburrs, bevels edges, polishes surfaces and other wise finishes out the material, part or assembly to specifications.
Assembles detail parts into subassemblies and complete assemblies using written and verbal work instructions.
Installs rivets, bolts, screws and clips and prepares and applies adhesives.
Inspects assemblies and installation for conformance to specifications.
Operates production machines and equipment such as hot or cold presses, band saws, and other like production machines to fabricate parts, components and material for production uses.
Reviews production and process documentation and production scheduling and planning and assist in expediting the flow of material, parts and assemblies.
Requirements
High School Diploma or GED
Must be able to use small hand tools and machinery
Previous manufacturing experience preferred.
Miscellaneous
About Our Client
This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
149141947342573
The Material Handler II is responsible for assisting in the shipping and receiving department in numerous functions
Essential Duties and Responsibilities
Kit production and service orders from warehouse inventory.
Perform cycle counts and inventory adjustments, complete material put away and issue, pick up and deliver materials from production storage areas.
Provide customer service for stakeholders with warehouse or shipping needs.
Bag and tag parts, load and unload trucks
Assemble and pack/unpack containers for shipping/receiving
Requirements
High School Diploma or GED
Valid Driver’s License
Two years Shipping/Receiving experience
Forklift experience
Good computer skills
Miscellaneous
About Our Client
This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
105068657524924
