Jobs Available

1 - 10 of 196 Matches

Upholstery Fabricator

South Central (Little Rock, AR)
Posted on 3/28/2024

Fabricate, develop, build, sew, and cover aircraft soft goods through the knowledge and skills of aircraft upholstery via Dassault Falcon Jet standards while using 3D models, drawings, blueprints, IDEI drawings, and/or spec control prints following Dassault Quality standards. Soft goods include crew seats, passenger seats, divans, side ledges, headliners and other assorted interior soft goods.

Essential Duties and Responsibilities

Interpret blueprints, completion drawings, company standards, work instructions, 3D model information. Perform proper maintenance practices in accordance to DFJ FPS, “F” standards and Quality standards, such as proper glue application, adhesive bonding, and hardware. Correct handling and use of all required tools specific to the current job assignment. Correct handling and use of all required chemicals and adhesives related to the current job assignment, including general knowledge and ability on retrieving data from the MSDS safety books. Position will primarily have one area of focus: Seat Covering Disassemble and reassemble vendor passenger seats and divans in accordance with the guidelines of the vendor component maintenance manuals, and other seat and divan vendors.

Requirements

High school diploma or equivalent Experience in Upholstery, Sewing, or related. Able to align intricate or elaborate designs in fabrics. Must not be allergic to chemical, solvents, paints, adhesives, natural or manmade materials, fabrics, or feathers. Basic computer skills. Able to work in confined spaces and in unusual positions. Able to lift and transport up to 40 lbs. with or without reasonable accommodation Visual capacity and muscular dexterity to work on fine detail, high cost products with a minimum of errors and rework. Able to stock and remove materials from bins above storage level according to OSHA standards. Preferred - Aircraft upholstery fabrication experience Preferred - Ability to solve practical problems when needed. Preferred - Able to interpret a variety of instructions furnished in written, oral, or diagram form. Preferred - Manufacturing, vocational, tech school training, and/or related college credits. Preferred - Computer and/or software training or experience. Preferred - Able to work from documentation such as MES, FPS, WI, blueprints, drawings, F-standards, preparation packages, etc. Preferred - Courses in state or federal vocational technical upholstery programs

Miscellaneous

WORKING CONDITIONS: Factory/manufacturing environment subject to high noise levels, adhesive or chemical odors, dust, and normal climate control.

About Our Client

Our partner is a French aerospace company with proven dual expertise as a manufacturer of both military aircraft and business jets. They are a pioneer in the use of CATIA™, the 3D CAD / CAM system that has become a global standard. They are a creator of more than 100 prototypes in the last century, with over 10,000 aircraft delivered to 90 countries.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

324120560260103

Temp Acrylic Fabricator Assistant

South Central (Tulsa, OK)
Posted on 3/28/2024

Applies basic, and some intermediate technical skills and knowledge to perform various production operations to fabricate, assemble and repair metallic and nonmetallic parts and assemblies for aerospace industry applications.

Essential Duties and Responsibilities

Performs routine developmental learning assignments and applies standard solutions to work situations of a routine or repetitive nature. May perform a variety of routine duties related to the area to which assigned. Uses hand and power tools such as routers, drill motors, die grinders and other like tools to complete the required operations called out in the work instructions. Trims parts to fit and files, grinds, deburrs, bevels edges, polishes surfaces and other wise finishes out the material, part or assembly to specifications. Assembles detail parts into subassemblies and complete assemblies using written and verbal work instructions. Installs rivets, bolts, screws and clips and prepares and applies adhesives. Inspects assemblies and installation for conformance to specifications. Operates production machines and equipment such as hot or cold presses, band saws, and other like production machines to fabricate parts, components and material for production uses. Reviews production and process documentation and production scheduling and planning and assist in expediting the flow of material, parts and assemblies.

Requirements

High School Diploma or GED Must be able to use small hand tools and machinery Previous manufacturing experience preferred.

Miscellaneous

About Our Client

This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

146397892949594

Avionics Technician (Flightline)

South Central (Little Rock, AR)
Posted on 3/28/2024

Operating, testing, modifying, troubleshooting, repairing and inspecting of all avionics and electrical systems on the aircraft.

Essential Duties and Responsibilities

Complete assigned tasks within the allocated man-hour budgets and on schedule while maintaining quality standards and performing the tasks within the guidelines of all safety and regulatory regulations and requirements. Performs wire-by-wire, power, functional and operational checkouts of electrical and avionics systems prior to aircraft flight. Performs in-flight system checks and troubleshooting. Set-up all required electrical and avionics test equipment in compliance with technical data, and then complete the appropriate functional tests that are required for each system. Detects and reports any unairworthy conditions. Connect air data test set to the appropriate aircraft fixtures and complete a full functional check-out of the entire pitot I static and air data system. Needs to be able to interpret various engineering documentation, diagrams and schematics. Troubleshoots problem systems and takes appropriate actions to correct discrepancies. Accurately logs on Labor Data Collection System for work orders, time and attendance tracking.

Requirements

High school diploma or equivalent Technical training and experience in the following: AC, DC, Digital, Analog, Pulse, Comm/Nav and Pitot/Static Systems. Able to read and interpret complex wiring diagrams, charts and schematics. At least 4 years of experience in avionics At least 1 year of experience using computer systems and aircraft diagnostic software. Able to work on maintenance stands, extending to 25 feet with or without reasonable accommodation Able to work in confined spaces and in unusual positions. Able to lift a minimum of 45 pounds with or without reasonable accommodation Must not be allergic to fuels, oils, hydraulic fluids and cleaning solvents. Must have manual dexterity.

Miscellaneous

About Our Client

Our partner is a French aerospace company with proven dual expertise as a manufacturer of both military aircraft and business jets. They are a pioneer in the use of CATIA™, the 3D CAD / CAM system that has become a global standard. They are a creator of more than 100 prototypes in the last century, with over 10,000 aircraft delivered to 90 countries.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

106217213010198

Temp Acrylic Fabricator Assistant

South Central (Tulsa, OK)
Posted on 3/26/2024

Applies basic, and some intermediate technical skills and knowledge to perform various production operations to fabricate, assemble and repair metallic and nonmetallic parts and assemblies for aerospace industry applications.

Essential Duties and Responsibilities

Performs routine developmental learning assignments and applies standard solutions to work situations of a routine or repetitive nature. May perform a variety of routine duties related to the area to which assigned. Uses hand and power tools such as routers, drill motors, die grinders and other like tools to complete the required operations called out in the work instructions. Trims parts to fit and files, grinds, deburrs, bevels edges, polishes surfaces and other wise finishes out the material, part or assembly to specifications. Assembles detail parts into subassemblies and complete assemblies using written and verbal work instructions. Installs rivets, bolts, screws and clips and prepares and applies adhesives. Inspects assemblies and installation for conformance to specifications. Operates production machines and equipment such as hot or cold presses, band saws, and other like production machines to fabricate parts, components and material for production uses. Reviews production and process documentation and production scheduling and planning and assist in expediting the flow of material, parts and assemblies.

Requirements

High School Diploma or GED Must be able to use small hand tools and machinery Previous manufacturing experience preferred.

Miscellaneous

About Our Client

This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

657167742325422

Sheetmetal Mechanic

Midwest (Rockford, IL)
Posted on 3/26/2024

Sheetmetal Mechanic is responsible for being proficient in minor and intermediate repairs, modifications and service bulletins. Aircraft Onsite: 737NG, 737 Classic, A319/320/321, A330

Essential Duties and Responsibilities

Highly proficient in fabrication, cold working, flap peening and jacking, shoring aircraft. Highly proficient in using technical data and drawings to locate part numbers and accomplish repairs. Insure work performed adheres to high quality standards. Effectively direct the work of less experienced mechanics. All other duties as assigned.

Requirements

3+ years of recent MRO experience. High school diploma or equivalent. Must have a valid driver’s license Must report for assignment with personal set of standard trade specific tools Must be flexible to work any shift as assigned SIDA badging required for this assignment. Must report with two forms of employment eligibility identification

Miscellaneous

About Our Client

Our client is an independent provider of aviation services to commercial and government customers in more than 100 countries. Our client's aftermarket expertise and award-winning solutions help customers increase efficiency and reduce costs while maintaining high levels of quality, service and safety.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

122027313199023

Interior Mechanic III

West (Goodyear, AZ)
Posted on 3/26/2024

The Interior Mechanic III will perform such typical maintenance operations such as the removal and replacement of aircraft and powerplant components that require bolting, torquing, adjusting rigging and safety wiring, including powerplant and flight control removal and reinstallation.

Essential Duties and Responsibilities

Repair, modify, replace or overhaul aircraft and aircraft systems to ensure airworthiness. Complete all tasks to the quality standards of FAA and our customers’ approved maintenance manual. Perform work within estimated or budgeted hours. Read and use Maintenance Manuals, Illustrated parts Catalog, Blueprints, ATA Codes, Service Bulletins, routine and non-routines and other related maintenance documents in order to troubleshoot and effectively complete work assignments. Ensures that the client and customer aircraft maintenance documents are accurate and properly annotated. Ensures documents are returned to the Technical Library and/or destroyed, as required, after jobs are complete. Use and operate safely all ground support equipment, (i.e., Main Lifts, Scissor Lifts, etc.) and possess the client's operating certification. Promote a culture of safety my monitoring self and others to assure all duties are performed within the guidelines as specified by the client's Team Member Safety Manual. Responsible for the proper execution of parts tags attached to repairable, serviceable or condemned parts. Interface effectively with members of management, other departments and co-workers. Keep own and adjacent work area clean Able to work any or all shifts.

Requirements

5+ years interior mechanic experience A&P License preferred High school education or equivalent Must provide own tools Work Environment and Physical Requirements: Must be able to lift fifty (50) pounds. Must be able to lift, bend, stoop, twist, kneel, crouch and stand for prolonged periods of time, as well as walk extended distances. Must be able to climb stairs, ladders and/service stands. Must have normal corrected hearing and vision. Must possess a valid driver's license and ability to drive company vehicles.

Miscellaneous

About Our Client

Our Client provides aftermarket commercial aircraft, engines, and its parts to passenger and cargo airlines, leasing companies, original equipment manufacturers, and government and defense contractors, as well as maintenance, repair, and overhaul (MRO) service providers worldwide. They were founded in 2008 and are headquartered in Florida.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

149959031357296

Temp Bonder Assistant

South Central (Tulsa, OK)
Posted on 3/26/2024

The Composite Technician is responsible for fabrication, rework and repair of metallic and nonmetallic bonded parts for operational aircraft.

Essential Duties and Responsibilities

Performs bonding of metallic or nonmetallic materials to fabricate parts for aircraft applications using products and processes are varied but generally not complex in scope. The level of work performed requires some skill and experience. Works under regular supervision applying standard procedures and solutions to meet work requirements. Priorities are determined by management. Reads and interprets blueprints, drawings, manuals, specifications sketches, job orders, planning documents and engineering drawings. Determines equipment requirements and the method and sequences of operation to be followed in fabrication of parts using materials such as graphite, fiberglass, plastic, boron, flock, mat, epoxy resins, rubber and like materials. Plans, lays out, fabricates and builds adhesive bonded assemblies of metallic and nonmetallic composite materials. Fabricate composite and metal parts into subassemblies for the purpose of pre-fitting in preparation for bonding/curing in presses, ovens, and autoclaves. Lays out, prefits, assemble and performs lay-up on a variety of metal to metal and composite bonded assemblies. Fits core in panels where close tolerances are required for installation of details for completion of assembly. Performs vacuum bagging for Autoclave cures up to 100 psi. Lays out and marks dimensions and reference lines on material to develop and trace patterns of product or parts, or uses templates. Selects tooling and materials compatible with the processing techniques identified in the work instructions.

Requirements

High School Diploma or GED Four (4) years of composite experience

Miscellaneous

About Our Client

This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

406543836603366

A&P Mechanic

Northeast (Bangor, ME)
Posted on 3/26/2024

A&P Mechanic will perform skilled work to identify, remove, and install aircraft components and to perform servicing of engines and aircraft accessories.

Essential Duties and Responsibilities

Performing depot-level maintenance and modifications on regional aircraft Repair, maintain and inspect the structural, mechanical, and electronic elements of the aircraft Work as part of a team and share knowledge with others to complete jobs effectively and efficiently

Requirements

3+ years experience on regional jets Experience working on the following aircraft preferred: ERJ 135,145. CRJ 200, 700 900 Valid Airframe/Powerplant certification

Miscellaneous

About Our Client

Our client is a global aviation services and aftermarket-support provider for regional and corporate aircraft specializing in quality parts, service, sales, leasing, maintenance, aircraft refurbishment and aircraft re-marketing. This client maintains a state-of-the-art 120,000 square-foot facility at Bangor International Airport in Maine, where for more than 20 years, aircraft have been coming for maintenance and inspections.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

125968661200804

Temp Aerostructure Repair Mechanic Assistant

South Central (Tulsa, OK)
Posted on 3/26/2024

The Sheet Metal Mechanic Assistant is responsible for assembling and/or repairing of aircraft parts, components, subsystems and operating systems.

Essential Duties and Responsibilities

Reads work instructions including production planning, engineering drawings, full size Mylar layouts, process specifications and other technical documentation to insure proper detail configuration. Determines dimensions to layout holes patterns, install clips, brackets, nut plates and like items. Lays out and marks dimensions and reference lines on material with or without templates or shop aides to develop or back drill hole patterns on composite, sheet metal and mechanical parts. Trims sheet metal and composite parts to fit and files, grinds, deburrs, buffs, and smooths surfaces. Installs assemblies in assembly jigs, fixtures or other tooling according to work instructions. Assembles parts into subassemblies and final assemblies using basic hand tools such as, drill motors, die grinders, sanders, polishers, rivet shavers and other like tools. Drills holes of varying sizes in detail parts and subassemblies according to work instructions. Installs blind rivets, Jo-Bolts, hilocks, huck bolts, solid rivets and bolts, drives and bucks rivets to attach and assemble detail parts to structural parts and complete subassemblies to written and verbal work instructions. Inspects completed assemblies for conformance to specifications. Completes and maintains necessary paperwork for documenting processes performed.

Requirements

High School Diploma or GED Two (2) or more years of major aircraft structural assembly. Miscellaneous: Must provide own tools

Miscellaneous

About Our Client

This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

129564355296809

Temp Painter Repair Assistant

South Central (Tulsa, OK)
Posted on 3/26/2024

Applies basic and some advanced technical skills and knowledge in original equipment manufacturing of final paint application on original equipment manufactured parts, components and complete subsystems for operational aircraft applications. Performs any of the detailed work operations required to be completed in this area of specialization.

Essential Duties and Responsibilities

Performs assembly of original equipment manufacturing of parts, components and subsystems for aircraft applications using products and processes are varied but generally not complex in scope to apply primer, topcoat paint, and any spray-applied coatings to aircraft parts consistent with government, customer and company standards. The level of work performed requires some skill and experience. Priorities are determined by management. Reads and interprets specifications and documents to define the scope of work on work orders. Cleans grease and dirt from product. Removes rust from metal with acid, wire brush, or steel wool. Applies masking tape over parts and areas that are not to be coated. Fills cavities and dents with putty to attain smooth surface. Computes mix ratios in order to mix paint materials. Selects and mixes coating liquid to produce desired color. Pours coating liquid into spray container and connects gun to air hose. Turns sprayer valves and nozzle to regulate width and pressure of spray. Selects the appropriate personal protective equipment for the operation to be performed. When using a respirator ensures the respirator is working properly and is properly worn. Applies spray onto work surface to apply prime or finish using protective or decorative material such as paint, enamel, glaze, gel-coat, or lacquer. Coats areas inaccessible to hand sprayer with brush. Heats and sprays wax onto products after they are tested. Cleans spraying equipment and brushes with solvent. Ensures compliance with environment regulations and maintains records in accordance with these environment regulations.

Requirements

Technical school and two (2) to four (4) or more years of aircraft or formal automotive painting, or equivalent combination of education and experience. High School/GED

Miscellaneous

About Our Client

This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

148010967702272

Benefits of working with APA Services

Weekly Payroll, Medical Insurance Available, Cash Advances, Travel Pay and/or bonuses on Select Contracts.
We know it takes great people to do great work, so if you're interested in joining the APA Services family, give us a call at:

(817)529-4000

Thanks for taking the time to visit APA Services and we look forward to working with you soon.

Browse All Jobs